60 lines
1.9 KiB
ReStructuredText
60 lines
1.9 KiB
ReStructuredText
AMBA APB
|
|
========
|
|
|
|
Both APB3 and APB4 standards are supported.
|
|
|
|
.. warning::
|
|
Some IP vendors will incorrectly implement the address signalling
|
|
assuming word-addresses. (that each increment of ``PADDR`` is the next word)
|
|
|
|
For this exporter, values on the interface's ``PADDR`` input are interpreted
|
|
as byte-addresses. (an APB interface with 32-bit wide data increments
|
|
``PADDR`` in steps of 4 for every word). Even though APB protocol does not
|
|
allow for unaligned transfers, this is in accordance to the official AMBA
|
|
specification.
|
|
|
|
Be sure to double-check the interpretation of your interconnect IP. A simple
|
|
bit-shift operation can be used to correct this if necessary.
|
|
|
|
|
|
APB3
|
|
----
|
|
|
|
Implements the register block using an
|
|
`AMBA 3 APB <https://developer.arm.com/documentation/ihi0024/b/Introduction/About-the-AMBA-3-APB>`_
|
|
CPU interface.
|
|
|
|
The APB3 CPU interface comes in two i/o port flavors:
|
|
|
|
SystemVerilog Interface
|
|
* Command line: ``--cpuif apb3``
|
|
* Interface Definition: :download:`apb3_intf.sv <../../hdl-src/apb3_intf.sv>`
|
|
* Class: :class:`peakrdl_busdecoder.cpuif.apb3.APB3_Cpuif`
|
|
|
|
Flattened inputs/outputs
|
|
Flattens the interface into discrete input and output ports.
|
|
|
|
* Command line: ``--cpuif apb3-flat``
|
|
* Class: :class:`peakrdl_busdecoder.cpuif.apb3.APB3_Cpuif_flattened`
|
|
|
|
|
|
APB4
|
|
----
|
|
|
|
Implements the register block using an
|
|
`AMBA 4 APB <https://developer.arm.com/documentation/ihi0024/d/?lang=en>`_
|
|
CPU interface.
|
|
|
|
The APB4 CPU interface comes in two i/o port flavors:
|
|
|
|
SystemVerilog Interface
|
|
* Command line: ``--cpuif apb4``
|
|
* Interface Definition: :download:`apb4_intf.sv <../../hdl-src/apb4_intf.sv>`
|
|
* Class: :class:`peakrdl_busdecoder.cpuif.apb4.APB4_Cpuif`
|
|
|
|
Flattened inputs/outputs
|
|
Flattens the interface into discrete input and output ports.
|
|
|
|
* Command line: ``--cpuif apb4-flat``
|
|
* Class: :class:`peakrdl_busdecoder.cpuif.apb4.APB4_Cpuif_flattened`
|