diff --git a/doc/pic.drawio b/doc/pic/pic.drawio
similarity index 100%
rename from doc/pic.drawio
rename to doc/pic/pic.drawio
diff --git a/doc/pic/pic.drawio.png b/doc/pic/pic.drawio.png
new file mode 100644
index 0000000..30180f2
Binary files /dev/null and b/doc/pic/pic.drawio.png differ
diff --git a/doc/pic/pic.md b/doc/pic/pic.md
new file mode 100644
index 0000000..e925aad
--- /dev/null
+++ b/doc/pic/pic.md
@@ -0,0 +1,60 @@
+# PIC
+
+## Overview
+
+The PIC (Programmable Interrupt Controller) supports 256 edge or level
+triggered interrupts.
+
+Interrupts can only be rising edge or positive level trigger. Negative edge or
+low level trigger can be accomplished by inverting the input to this module.
+
+When an interrupt is triggered, it remains triggered until cleared with an
+`EOI`. Currently, only the highest priority interrupt can be cleared. This
+is bad design and will be fixed soon(tm).
+
+![pic.drawio.png](pic.drawio.png)
+
+## Interface
+
+The PIC is controlled through two 8-bit registers, `CMD` and `DAT`.
+The upepr 3 bits of `CMD` control which register is accessed, and the lower 5
+bits control the byte select.
+
+`EOI` is a special case: when `CMD` is 0xFF, the highest priority interrupt is
+cleared.
+
+### CMD
+| [7:5]            	| [4:0]       	|
+|------------------	|-------------	|
+| Register Address 	| Byte Select 	|
+
+### DAT
+| [7:0]                 	|
+|-----------------------	|
+| Data[8*Byte_sel +: 8] 	|
+
+## Registers
+
+### Register Map
+
+| Address 	| Read       	| Write  	|
+|---------	|------------	|--------	|
+| 0       	| IRQ Number 	| ~      	|
+| 1       	| Enable     	| Enable 	|
+| 2       	| Type       	| Type   	|
+
+### IRQ Number
+
+8 bit register outputs the highest priority interrupt currently active. When 
+no interrupt is active, it will output 255.
+
+### Enable
+
+256 bit enable register. When bit _n_ is set to 1, the corresponding interrupt
+_n_.
+
+### Type
+
+256 bit type register. When bit _n_ is set to 0, the corresponding interrupt
+_n_ will be edge triggered. If the bit is set to 1, the interrupt will be level
+triggered.
\ No newline at end of file