These series of commands are enough to read the first 512b block off of the sd card. The RCA is hard coded to the sd card that I have on hand, since response codes are not supported
80 lines
1.7 KiB
C
80 lines
1.7 KiB
C
#include <stdint.h>
|
|
#include <conio.h>
|
|
|
|
#include "board_io.h"
|
|
#include "uart.h"
|
|
#include "mapper.h"
|
|
#include "sd_card.h"
|
|
|
|
int main() {
|
|
int i;
|
|
uint8_t sw;
|
|
char s[16];
|
|
s[15] = 0;
|
|
|
|
clrscr();
|
|
cprintf("Hello, world!\n");
|
|
|
|
for (i = 0; i < 16; i++){
|
|
cprintf("Mapping %1xxxx to %2xxxx\n", i, i);
|
|
mapper_write(i, i);
|
|
}
|
|
|
|
cprintf("Enabling Mapper\n");
|
|
mapper_enable(1);
|
|
|
|
cprintf("Writing 0xcccc to 0x4000\n");
|
|
*(unsigned int*)(0x4000) = 0xcccc;
|
|
|
|
cprintf("Writing 0xdddd to 0x5000\n");
|
|
*(unsigned int*)(0x5000) = 0xdddd;
|
|
|
|
cprintf("Mapping %1xxxx to %2xxxx\n", 4, 16);
|
|
mapper_write(16, 4);
|
|
|
|
cprintf("Mapping %1xxxx to %2xxxx\n", 5, 16);
|
|
mapper_write(16, 5);
|
|
|
|
cprintf("Writing 0xa5a5 to 0x4000\n");
|
|
*(unsigned int*)(0x4000) = 0xa5a5;
|
|
|
|
cprintf("Reading from 0x5000: %x\n", *(unsigned int*)(0x5000));
|
|
|
|
cprintf("Resetting map\n");
|
|
mapper_write(4, 4);
|
|
mapper_write(5, 5);
|
|
|
|
cprintf("Reading from 0x4000: %x\n", *(unsigned int*)(0x4000));
|
|
cprintf("Reading from 0x5000: %x\n", *(unsigned int*)(0x5000));
|
|
|
|
// This will read a 512 block from the sd card.
|
|
// The RCA is hard coded for the one that I have on hand as responses
|
|
// are not implemented yet.
|
|
sd_card_command(0, 0);
|
|
sd_card_command(0x000001aa, 8);
|
|
sd_card_command(0, 55);
|
|
sd_card_command(0x40180000, 41);
|
|
sd_card_command(0, 55);
|
|
sd_card_command(0x40180000, 41);
|
|
sd_card_command(0, 2);
|
|
sd_card_command(0, 3);
|
|
sd_card_command(0x59b40000, 7);
|
|
sd_card_command(0x59b41000, 13);
|
|
sd_card_command(0, 17);
|
|
|
|
while (1) {
|
|
|
|
sw = sw_read();
|
|
led_set(sw);
|
|
|
|
cscanf("%15s", s);
|
|
cprintf("\n");
|
|
for (i = 0; i < 16; i++)
|
|
cprintf("s[%d]=%c ", i, s[i]);
|
|
cprintf("\n");
|
|
cprintf("Read string: %s\n", s);
|
|
}
|
|
|
|
return 0;
|
|
}
|