From 3519abbee5bf5a0821c3676eeeb81714b069ff1d Mon Sep 17 00:00:00 2001 From: Alex Forencich Date: Sun, 9 Nov 2025 14:24:05 -0800 Subject: [PATCH] eth: Add support for 10GBASE-R to KC705 example design Signed-off-by: Alex Forencich --- src/eth/example/KC705/fpga_10g/README.md | 51 ++ .../example/KC705/fpga_10g/common/vivado.mk | 153 ++++ src/eth/example/KC705/fpga_10g/eth_gmii.xdc | 12 + src/eth/example/KC705/fpga_10g/eth_rgmii.xdc | 15 + src/eth/example/KC705/fpga_10g/fpga.xdc | 210 +++++ .../example/KC705/fpga_10g/fpga_gmii/Makefile | 58 ++ .../KC705/fpga_10g/fpga_gmii/config.tcl | 30 + .../KC705/fpga_10g/fpga_rgmii/Makefile | 58 ++ .../KC705/fpga_10g/fpga_rgmii/config.tcl | 30 + src/eth/example/KC705/fpga_10g/lib/taxi | 1 + src/eth/example/KC705/fpga_10g/rtl/fpga.sv | 556 +++++++++++++ .../example/KC705/fpga_10g/rtl/fpga_core.sv | 766 ++++++++++++++++++ .../KC705/fpga_10g/rtl/si5324_i2c_init.sv | 567 +++++++++++++ .../KC705/fpga_10g/tb/fpga_core/Makefile | 64 ++ .../KC705/fpga_10g/tb/fpga_core/baser.py | 1 + .../fpga_10g/tb/fpga_core/test_fpga_core.py | 309 +++++++ 16 files changed, 2881 insertions(+) create mode 100644 src/eth/example/KC705/fpga_10g/README.md create mode 100644 src/eth/example/KC705/fpga_10g/common/vivado.mk create mode 100644 src/eth/example/KC705/fpga_10g/eth_gmii.xdc create mode 100644 src/eth/example/KC705/fpga_10g/eth_rgmii.xdc create mode 100644 src/eth/example/KC705/fpga_10g/fpga.xdc create mode 100644 src/eth/example/KC705/fpga_10g/fpga_gmii/Makefile create mode 100644 src/eth/example/KC705/fpga_10g/fpga_gmii/config.tcl create mode 100644 src/eth/example/KC705/fpga_10g/fpga_rgmii/Makefile create mode 100644 src/eth/example/KC705/fpga_10g/fpga_rgmii/config.tcl create mode 120000 src/eth/example/KC705/fpga_10g/lib/taxi create mode 100644 src/eth/example/KC705/fpga_10g/rtl/fpga.sv create mode 100644 src/eth/example/KC705/fpga_10g/rtl/fpga_core.sv create mode 100644 src/eth/example/KC705/fpga_10g/rtl/si5324_i2c_init.sv create mode 100644 src/eth/example/KC705/fpga_10g/tb/fpga_core/Makefile create mode 120000 src/eth/example/KC705/fpga_10g/tb/fpga_core/baser.py create mode 100644 src/eth/example/KC705/fpga_10g/tb/fpga_core/test_fpga_core.py diff --git a/src/eth/example/KC705/fpga_10g/README.md b/src/eth/example/KC705/fpga_10g/README.md new file mode 100644 index 0000000..869f755 --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/README.md @@ -0,0 +1,51 @@ +# Taxi Example Design for KC705 + +## Introduction + +This example design targets the Xilinx KC705 FPGA board. + +The design places looped-back MACs on both the BASE-T port and the SFP+ cage, as well as XFCP on the USB UART for monitoring and control. + +Note that this design does not support SGMII as the Xilinx SGMII core requires the GTX QPLL, which is already used for 10GBASE-R on the same quad. + +* USB UART + * XFCP (921600 baud) +* RJ-45 Ethernet port with Marvell 88E1111 PHY + * Looped-back MAC via GMII + * Looped-back MAC via RGMII +* SFP+ cage + * Looped-back 10GBASE-R MACs via GTX transceiver + +## Board details + +* FPGA: XC7K325T-2FFG900C +* USB UART: Silicon Labs CP2103 +* 1000BASE-T PHY: Marvell 88E1111 via GMII or RGMII + +## Licensing + +* Toolchain + * Vivado Enterprise (requires license) +* IP + * No licensed vendor IP or 3rd party IP + +## How to build + +Run `make` in the appropriate `fpga*` subdirectory to build the bitstream. Ensure that the Xilinx Vivado toolchain components are in PATH. + +## Board configuration + +Several jumpers must be configured to configure the PHY chip for the appropriate mode. + +| Mode | J29 | J30 | J64 | +| -------- | ---- | ---- | ---- | +| GMII/MII | 1-2 | 1-2 | open | +| RGMII | 1-2 | open | 1-2 | + +Also, note that version 1.0 of the KC705 has the SFP+ TX and RX connections polarity-inverted. Version 1.1 has this fixed. This setting is controlled via a top-level parameter setting that is configurable via config.tcl, so ensure to use a design matching the board revision. + +## How to test + +Run `make program` to program the board with Vivado. + +To test the looped-back MAC, it is recommended to use a network tester like the Viavi T-BERD 5800 that supports basic layer 2 tests with a loopback. Do not connect the looped-back MAC to a network as the reflected packets may cause problems. diff --git a/src/eth/example/KC705/fpga_10g/common/vivado.mk b/src/eth/example/KC705/fpga_10g/common/vivado.mk new file mode 100644 index 0000000..07c56e2 --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/common/vivado.mk @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: MIT +################################################################### +# +# Xilinx Vivado FPGA Makefile +# +# Copyright (c) 2016-2025 Alex Forencich +# +################################################################### +# +# Parameters: +# FPGA_TOP - Top module name +# FPGA_FAMILY - FPGA family (e.g. VirtexUltrascale) +# FPGA_DEVICE - FPGA device (e.g. xcvu095-ffva2104-2-e) +# SYN_FILES - list of source files +# INC_FILES - list of include files +# XDC_FILES - list of timing constraint files +# XCI_FILES - list of IP XCI files +# IP_TCL_FILES - list of IP TCL files (sourced during project creation) +# CONFIG_TCL_FILES - list of config TCL files (sourced before each build) +# +# Note: both SYN_FILES and INC_FILES support file list files. File list +# files are files with a .f extension that contain a list of additional +# files to include, one path relative to the .f file location per line. +# The .f files are processed recursively, and then the complete file list +# is de-duplicated, with later files in the list taking precedence. +# +# Example: +# +# FPGA_TOP = fpga +# FPGA_FAMILY = VirtexUltrascale +# FPGA_DEVICE = xcvu095-ffva2104-2-e +# SYN_FILES = rtl/fpga.v +# XDC_FILES = fpga.xdc +# XCI_FILES = ip/pcspma.xci +# include ../common/vivado.mk +# +################################################################### + +# phony targets +.PHONY: fpga vivado tmpclean clean distclean + +# prevent make from deleting intermediate files and reports +.PRECIOUS: %.xpr %.bit %.bin %.ltx %.xsa %.mcs %.prm +.SECONDARY: + +CONFIG ?= config.mk +-include $(CONFIG) + +FPGA_TOP ?= fpga +PROJECT ?= $(FPGA_TOP) +XDC_FILES ?= $(PROJECT).xdc + +# handle file list files +process_f_file = $(call process_f_files,$(addprefix $(dir $1),$(shell cat $1))) +process_f_files = $(foreach f,$1,$(if $(filter %.f,$f),$(call process_f_file,$f),$f)) +uniq_base = $(if $1,$(call uniq_base,$(foreach f,$1,$(if $(filter-out $(notdir $(lastword $1)),$(notdir $f)),$f,))) $(lastword $1)) +SYN_FILES := $(call uniq_base,$(call process_f_files,$(SYN_FILES))) +INC_FILES := $(call uniq_base,$(call process_f_files,$(INC_FILES))) + +################################################################### +# Main Targets +# +# all: build everything (fpga) +# fpga: build FPGA config +# vivado: open project in Vivado +# tmpclean: remove intermediate files +# clean: remove output files and project files +# distclean: remove archived output files +################################################################### + +all: fpga + +fpga: $(PROJECT).bit + +vivado: $(PROJECT).xpr + vivado $(PROJECT).xpr + +tmpclean:: + -rm -rf *.log *.jou *.cache *.gen *.hbs *.hw *.ip_user_files *.runs *.xpr *.html *.xml *.sim *.srcs *.str .Xil defines.v + -rm -rf create_project.tcl update_config.tcl run_synth.tcl run_impl.tcl generate_bit.tcl + +clean:: tmpclean + -rm -rf *.bit *.bin *.ltx *.xsa program.tcl generate_mcs.tcl *.mcs *.prm flash.tcl + -rm -rf *_utilization.rpt *_utilization_hierarchical.rpt + +distclean:: clean + -rm -rf rev + +################################################################### +# Target implementations +################################################################### + +# Vivado project file + +# create fresh project if Makefile or IP files have changed +create_project.tcl: Makefile $(XCI_FILES) $(IP_TCL_FILES) + rm -rf defines.v + touch defines.v + for x in $(DEFS); do echo '`define' $$x >> defines.v; done + echo "create_project -force -part $(FPGA_PART) $(PROJECT)" > $@ + echo "add_files -fileset sources_1 defines.v $(SYN_FILES)" >> $@ + echo "set_property top $(FPGA_TOP) [current_fileset]" >> $@ + echo "add_files -fileset constrs_1 $(XDC_FILES)" >> $@ + for x in $(XCI_FILES); do echo "import_ip $$x" >> $@; done + for x in $(IP_TCL_FILES); do echo "source $$x" >> $@; done + for x in $(CONFIG_TCL_FILES); do echo "source $$x" >> $@; done + +# source config TCL scripts if any source file has changed +update_config.tcl: $(CONFIG_TCL_FILES) $(SYN_FILES) $(INC_FILES) $(XDC_FILES) + echo "open_project -quiet $(PROJECT).xpr" > $@ + for x in $(CONFIG_TCL_FILES); do echo "source $$x" >> $@; done + +$(PROJECT).xpr: create_project.tcl update_config.tcl + vivado -nojournal -nolog -mode batch $(foreach x,$?,-source $x) + +# synthesis run +$(PROJECT).runs/synth_1/$(PROJECT).dcp: create_project.tcl update_config.tcl $(SYN_FILES) $(INC_FILES) $(XDC_FILES) | $(PROJECT).xpr + echo "open_project $(PROJECT).xpr" > run_synth.tcl + echo "reset_run synth_1" >> run_synth.tcl + echo "launch_runs -jobs 4 synth_1" >> run_synth.tcl + echo "wait_on_run synth_1" >> run_synth.tcl + vivado -nojournal -nolog -mode batch -source run_synth.tcl + +# implementation run +$(PROJECT).runs/impl_1/$(PROJECT)_routed.dcp: $(PROJECT).runs/synth_1/$(PROJECT).dcp + echo "open_project $(PROJECT).xpr" > run_impl.tcl + echo "reset_run impl_1" >> run_impl.tcl + echo "launch_runs -jobs 4 impl_1" >> run_impl.tcl + echo "wait_on_run impl_1" >> run_impl.tcl + echo "open_run impl_1" >> run_impl.tcl + echo "report_utilization -file $(PROJECT)_utilization.rpt" >> run_impl.tcl + echo "report_utilization -hierarchical -file $(PROJECT)_utilization_hierarchical.rpt" >> run_impl.tcl + vivado -nojournal -nolog -mode batch -source run_impl.tcl + +# output files (including potentially bit, bin, ltx, and xsa) +$(PROJECT).bit $(PROJECT).bin $(PROJECT).ltx $(PROJECT).xsa: $(PROJECT).runs/impl_1/$(PROJECT)_routed.dcp + echo "open_project $(PROJECT).xpr" > generate_bit.tcl + echo "open_run impl_1" >> generate_bit.tcl + echo "write_bitstream -force -bin_file $(PROJECT).runs/impl_1/$(PROJECT).bit" >> generate_bit.tcl + echo "write_debug_probes -force $(PROJECT).runs/impl_1/$(PROJECT).ltx" >> generate_bit.tcl + echo "write_hw_platform -fixed -force -include_bit $(PROJECT).xsa" >> generate_bit.tcl + vivado -nojournal -nolog -mode batch -source generate_bit.tcl + ln -f -s $(PROJECT).runs/impl_1/$(PROJECT).bit . + ln -f -s $(PROJECT).runs/impl_1/$(PROJECT).bin . + if [ -e $(PROJECT).runs/impl_1/$(PROJECT).ltx ]; then ln -f -s $(PROJECT).runs/impl_1/$(PROJECT).ltx .; fi + mkdir -p rev + COUNT=100; \ + while [ -e rev/$(PROJECT)_rev$$COUNT.bit ]; \ + do COUNT=$$((COUNT+1)); done; \ + cp -pv $(PROJECT).runs/impl_1/$(PROJECT).bit rev/$(PROJECT)_rev$$COUNT.bit; \ + cp -pv $(PROJECT).runs/impl_1/$(PROJECT).bin rev/$(PROJECT)_rev$$COUNT.bin; \ + if [ -e $(PROJECT).runs/impl_1/$(PROJECT).ltx ]; then cp -pv $(PROJECT).runs/impl_1/$(PROJECT).ltx rev/$(PROJECT)_rev$$COUNT.ltx; fi; \ + if [ -e $(PROJECT).xsa ]; then cp -pv $(PROJECT).xsa rev/$(PROJECT)_rev$$COUNT.xsa; fi diff --git a/src/eth/example/KC705/fpga_10g/eth_gmii.xdc b/src/eth/example/KC705/fpga_10g/eth_gmii.xdc new file mode 100644 index 0000000..1d86351 --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/eth_gmii.xdc @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: MIT +# +# Copyright (c) 2025 FPGA Ninja, LLC +# +# Authors: +# - Alex Forencich +# + +# Ethernet constraints + +# BUFGMUX outputs (GMII) +set_clock_groups -physically_exclusive -group clk_mmcm_out -group phy_tx_clk diff --git a/src/eth/example/KC705/fpga_10g/eth_rgmii.xdc b/src/eth/example/KC705/fpga_10g/eth_rgmii.xdc new file mode 100644 index 0000000..be62d54 --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/eth_rgmii.xdc @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: MIT +# +# Copyright (c) 2025 FPGA Ninja, LLC +# +# Authors: +# - Alex Forencich +# + +# Ethernet constraints + +# IDELAY from PHY chip (RGMII) +set_property IDELAY_VALUE 0 [get_cells {phy_if.phy_rx_ctl_idelay phy_if.phy_rxd_idelay_bit[*].idelay_inst}] + +# MMCM phase (RGMII) +set_property CLKOUT1_PHASE 90 [get_cells clk_mmcm_inst] diff --git a/src/eth/example/KC705/fpga_10g/fpga.xdc b/src/eth/example/KC705/fpga_10g/fpga.xdc new file mode 100644 index 0000000..7afceba --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/fpga.xdc @@ -0,0 +1,210 @@ +# SPDX-License-Identifier: MIT +# +# Copyright (c) 2014-2025 FPGA Ninja, LLC +# +# Authors: +# - Alex Forencich +# + +# XDC constraints for the Xilinx KC705 board +# part: xc7k325tffg900-2 + +# General configuration +set_property CFGBVS VCCO [current_design] +set_property CONFIG_VOLTAGE 2.5 [current_design] +set_property BITSTREAM.GENERAL.COMPRESS true [current_design] + +# System clocks +# 200 MHz system clock +set_property -dict {LOC AD12 IOSTANDARD LVDS} [get_ports clk_200mhz_p] ;# from SiT9102 U6.4 +set_property -dict {LOC AD11 IOSTANDARD LVDS} [get_ports clk_200mhz_n] ;# from SiT9102 U6.5 +create_clock -period 5.000 -name clk_200mhz [get_ports clk_200mhz_p] + +# Si570 user clock (156.25 MHz default) +#set_property -dict {LOC K28 IOSTANDARD LVDS_25} [get_ports clk_user_p] ;# from Si570 U45.4 +#set_property -dict {LOC K29 IOSTANDARD LVDS_25} [get_ports clk_user_n] ;# from Si570 U45.5 +#create_clock -period 6.400 -name clk_user [get_ports clk_user_p] + +# User SMA clock +#set_property -dict {LOC L25 IOSTANDARD LVDS_25} [get_ports clk_user_sma_p] ;# from J11 +#set_property -dict {LOC K25 IOSTANDARD LVDS_25} [get_ports clk_user_sma_n] ;# from J12 +#create_clock -period 10.000 -name clk_user_sma [get_ports clk_user_sma_p] + +# LEDs +set_property -dict {LOC AB8 IOSTANDARD LVCMOS15 SLEW SLOW DRIVE 12} [get_ports {led[0]}] ;# to DS4 +set_property -dict {LOC AA8 IOSTANDARD LVCMOS15 SLEW SLOW DRIVE 12} [get_ports {led[1]}] ;# to DS1 +set_property -dict {LOC AC9 IOSTANDARD LVCMOS15 SLEW SLOW DRIVE 12} [get_ports {led[2]}] ;# to DS10 +set_property -dict {LOC AB9 IOSTANDARD LVCMOS15 SLEW SLOW DRIVE 12} [get_ports {led[3]}] ;# to DS2 +set_property -dict {LOC AE26 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 12} [get_ports {led[4]}] ;# to DS3 +set_property -dict {LOC G19 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 12} [get_ports {led[5]}] ;# to DS25 +set_property -dict {LOC E18 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 12} [get_ports {led[6]}] ;# to DS26 +set_property -dict {LOC F16 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 12} [get_ports {led[7]}] ;# to DS27 + +set_false_path -to [get_ports {led[*]}] +set_output_delay 0 [get_ports {led[*]}] + +# Reset button +set_property -dict {LOC AB7 IOSTANDARD LVCMOS15} [get_ports reset] ;# from SW7 + +set_false_path -from [get_ports {reset}] +set_input_delay 0 [get_ports {reset}] + +# Push buttons +set_property -dict {LOC AA12 IOSTANDARD LVCMOS15} [get_ports btnu] ;# from SW2 +set_property -dict {LOC AC6 IOSTANDARD LVCMOS15} [get_ports btnl] ;# from SW6 +set_property -dict {LOC AB12 IOSTANDARD LVCMOS15} [get_ports btnd] ;# from SW4 +set_property -dict {LOC AG5 IOSTANDARD LVCMOS15} [get_ports btnr] ;# from SW3 +set_property -dict {LOC G12 IOSTANDARD LVCMOS25} [get_ports btnc] ;# from SW5 + +set_false_path -from [get_ports {btnu btnl btnd btnr btnc}] +set_input_delay 0 [get_ports {btnu btnl btnd btnr btnc}] + +# DIP switches +set_property -dict {LOC Y29 IOSTANDARD LVCMOS25} [get_ports {sw[0]}] ;# from SW4.4 +set_property -dict {LOC W29 IOSTANDARD LVCMOS25} [get_ports {sw[1]}] ;# from SW4.3 +set_property -dict {LOC AA28 IOSTANDARD LVCMOS25} [get_ports {sw[2]}] ;# from SW4.2 +set_property -dict {LOC Y28 IOSTANDARD LVCMOS25} [get_ports {sw[3]}] ;# from SW4.1 + +set_false_path -from [get_ports {sw[*]}] +set_input_delay 0 [get_ports {sw[*]}] + +# UART (U12 CP2103) +set_property -dict {LOC K24 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 8} [get_ports {uart_txd}] ;# U12.24 RXD_I +set_property -dict {LOC M19 IOSTANDARD LVCMOS25} [get_ports {uart_rxd}] ;# U12.25 TXD_O +set_property -dict {LOC L27 IOSTANDARD LVCMOS25} [get_ports {uart_rts}] ;# U12.23 RTS_O_B +set_property -dict {LOC K23 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 8} [get_ports {uart_cts}] ;# U12.22 CTS_I_B + +set_false_path -to [get_ports {uart_txd uart_cts}] +set_output_delay 0 [get_ports {uart_txd uart_cts}] +set_false_path -from [get_ports {uart_rxd uart_rts}] +set_input_delay 0 [get_ports {uart_rxd uart_rts}] + +# I2C interface +set_property -dict {LOC K21 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 8} [get_ports i2c_scl] +set_property -dict {LOC L21 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 8} [get_ports i2c_sda] +set_property -dict {LOC P23 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 8} [get_ports i2c_mux_reset] + +set_false_path -to [get_ports {i2c_sda i2c_scl}] +set_output_delay 0 [get_ports {i2c_sda i2c_scl}] +set_false_path -from [get_ports {i2c_sda i2c_scl}] +set_input_delay 0 [get_ports {i2c_sda i2c_scl}] + +# Gigabit Ethernet GMII PHY +set_property -dict {LOC U27 IOSTANDARD LVCMOS25} [get_ports phy_rx_clk] ;# from U37.C1 RXCLK +set_property -dict {LOC U30 IOSTANDARD LVCMOS25} [get_ports {phy_rxd[0]}] ;# from U37.B2 RXD0 +set_property -dict {LOC U25 IOSTANDARD LVCMOS25} [get_ports {phy_rxd[1]}] ;# from U37.D3 RXD1 +set_property -dict {LOC T25 IOSTANDARD LVCMOS25} [get_ports {phy_rxd[2]}] ;# from U37.C3 RXD2 +set_property -dict {LOC U28 IOSTANDARD LVCMOS25} [get_ports {phy_rxd[3]}] ;# from U37.B3 RXD3 +set_property -dict {LOC R19 IOSTANDARD LVCMOS25} [get_ports {phy_rxd[4]}] ;# from U37.C4 RXD4 +set_property -dict {LOC T27 IOSTANDARD LVCMOS25} [get_ports {phy_rxd[5]}] ;# from U37.A1 RXD5 +set_property -dict {LOC T26 IOSTANDARD LVCMOS25} [get_ports {phy_rxd[6]}] ;# from U37.A2 RXD6 +set_property -dict {LOC T28 IOSTANDARD LVCMOS25} [get_ports {phy_rxd[7]}] ;# from U37.C5 RXD7 +set_property -dict {LOC R28 IOSTANDARD LVCMOS25} [get_ports phy_rx_dv] ;# from U37.B1 RXCTL_RXDV +set_property -dict {LOC V26 IOSTANDARD LVCMOS25} [get_ports phy_rx_er] ;# from U37.D4 RXER +set_property -dict {LOC K30 IOSTANDARD LVCMOS25 SLEW FAST DRIVE 16} [get_ports phy_gtx_clk] ;# from U37.E2 TXC_GTXCLK +set_property -dict {LOC M28 IOSTANDARD LVCMOS25} [get_ports phy_tx_clk] ;# from U37.D1 TXCLK +set_property -dict {LOC N27 IOSTANDARD LVCMOS25 SLEW FAST DRIVE 16} [get_ports {phy_txd[0]}] ;# from U37.F1 TXD0 +set_property -dict {LOC N25 IOSTANDARD LVCMOS25 SLEW FAST DRIVE 16} [get_ports {phy_txd[1]}] ;# from U37.G2 TXD1 +set_property -dict {LOC M29 IOSTANDARD LVCMOS25 SLEW FAST DRIVE 16} [get_ports {phy_txd[2]}] ;# from U37.G3 TXD2 +set_property -dict {LOC L28 IOSTANDARD LVCMOS25 SLEW FAST DRIVE 16} [get_ports {phy_txd[3]}] ;# from U37.H1 TXD3 +set_property -dict {LOC J26 IOSTANDARD LVCMOS25 SLEW FAST DRIVE 16} [get_ports {phy_txd[4]}] ;# from U37.H2 TXD4 +set_property -dict {LOC K26 IOSTANDARD LVCMOS25 SLEW FAST DRIVE 16} [get_ports {phy_txd[5]}] ;# from U37.H3 TXD5 +set_property -dict {LOC L30 IOSTANDARD LVCMOS25 SLEW FAST DRIVE 16} [get_ports {phy_txd[6]}] ;# from U37.J1 TXD6 +set_property -dict {LOC J28 IOSTANDARD LVCMOS25 SLEW FAST DRIVE 16} [get_ports {phy_txd[7]}] ;# from U37.J2 TXD7 +set_property -dict {LOC M27 IOSTANDARD LVCMOS25 SLEW FAST DRIVE 16} [get_ports phy_tx_en] ;# from U37.E1 TXCTL_TXEN +set_property -dict {LOC N29 IOSTANDARD LVCMOS25 SLEW FAST DRIVE 16} [get_ports phy_tx_er] ;# from U37.F2 TXER +set_property -dict {LOC L20 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 12} [get_ports phy_reset_n] ;# from U37.K3 RESET_B +set_property -dict {LOC N30 IOSTANDARD LVCMOS25} [get_ports phy_int_n] ;# from U37.L1 INT_B +#set_property -dict {LOC J21 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 12} [get_ports phy_mdio] ;# from U37.M1 MDIO +#set_property -dict {LOC R23 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 12} [get_ports phy_mdc] ;# from U37.L3 MDC + +create_clock -period 40.000 -name phy_tx_clk [get_ports phy_tx_clk] +create_clock -period 8.000 -name phy_rx_clk [get_ports phy_rx_clk] + +set_false_path -to [get_ports {phy_reset_n}] +set_output_delay 0 [get_ports {phy_reset_n}] +set_false_path -from [get_ports {phy_int_n}] +set_input_delay 0 [get_ports {phy_int_n}] + +#set_false_path -to [get_ports {phy_mdio phy_mdc}] +#set_output_delay 0 [get_ports {phy_mdio phy_mdc}] +#set_false_path -from [get_ports {phy_mdio}] +#set_input_delay 0 [get_ports {phy_mdio}] + +# GTX for Ethernet +set_property -dict {LOC G4 } [get_ports sfp_rx_p] ;# MGTXRXP2_117 GTXE2_CHANNEL_X0Y10 / GTXE2_COMMON_X0Y2 from P5.13 +set_property -dict {LOC G3 } [get_ports sfp_rx_n] ;# MGTXRXN2_117 GTXE2_CHANNEL_X0Y10 / GTXE2_COMMON_X0Y2 from P5.12 +set_property -dict {LOC H2 } [get_ports sfp_tx_p] ;# MGTXTXP2_117 GTXE2_CHANNEL_X0Y10 / GTXE2_COMMON_X0Y2 from P5.18 +set_property -dict {LOC H1 } [get_ports sfp_tx_n] ;# MGTXTXN2_117 GTXE2_CHANNEL_X0Y10 / GTXE2_COMMON_X0Y2 from P5.19 +#set_property -dict {LOC H6 } [get_ports phy_sgmii_rx_p] ;# MGTXRXP1_117 GTXE2_CHANNEL_X0Y9 / GTXE2_COMMON_X0Y2 from U37.A7 SOUT_P +#set_property -dict {LOC H5 } [get_ports phy_sgmii_rx_n] ;# MGTXRXN1_117 GTXE2_CHANNEL_X0Y9 / GTXE2_COMMON_X0Y2 from U37.A8 SOUT_N +#set_property -dict {LOC J4 } [get_ports phy_sgmii_tx_p] ;# MGTXTXP1_117 GTXE2_CHANNEL_X0Y9 / GTXE2_COMMON_X0Y2 from U37.A3 SIN_P +#set_property -dict {LOC J3 } [get_ports phy_sgmii_tx_n] ;# MGTXTXN1_117 GTXE2_CHANNEL_X0Y9 / GTXE2_COMMON_X0Y2 from U37.A4 SIN_N +#set_property -dict {LOC G8 } [get_ports sgmii_mgt_refclk_p] ;# MGTREFCLK0P_117 from U2.7 +#set_property -dict {LOC G7 } [get_ports sgmii_mgt_refclk_n] ;# MGTREFCLK0N_117 from U2.6 +set_property -dict {LOC L8 } [get_ports sfp_mgt_refclk_p] ;# MGTREFCLK0P_116 from Si5324 U70.28 CKOUT1_P +set_property -dict {LOC L7 } [get_ports sfp_mgt_refclk_n] ;# MGTREFCLK0N_116 from Si5324 U70.29 CKOUT1_N +#set_property -dict {LOC W27 IOSTANDARD LVDS} [get_ports sfp_recclk_p] ;# to Si5324 U70.16 CKIN1_P +#set_property -dict {LOC W28 IOSTANDARD LVDS} [get_ports sfp_recclk_n] ;# to Si5324 U70.17 CKIN1_N + +set_property -dict {LOC AE20 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 12} [get_ports si5324_rst] +set_property -dict {LOC AG24 IOSTANDARD LVCMOS25 PULLUP true} [get_ports si5324_int] + +set_property -dict {LOC Y20 IOSTANDARD LVCMOS25 SLEW SLOW DRIVE 12} [get_ports {sfp_tx_disable_b}] + +# 125 MHz MGT reference clock (SGMII, 1000BASE-X) +#create_clock -period 8.000 -name sgmii_mgt_refclk [get_ports sgmii_mgt_refclk_p] + +# 156.25 MHz MGT reference clock (10GBASE-R) +create_clock -period 6.400 -name sgmii_mgt_refclk [get_ports sfp_mgt_refclk_p] + +set_false_path -to [get_ports {si5324_rst}] +set_output_delay 0 [get_ports {si5324_rst}] +set_false_path -from [get_ports {si5324_int}] +set_input_delay 0 [get_ports {si5324_int}] + +set_false_path -to [get_ports {sfp_tx_disable_b}] +set_output_delay 0 [get_ports {sfp_tx_disable_b}] + +# PCIe Interface +#set_property -dict {LOC M6 } [get_ports {pcie_rx_p[0]}] ;# MGTHRXP3_225 GTXE3_CHANNEL_X0Y7 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC M5 } [get_ports {pcie_rx_n[0]}] ;# MGTHRXN3_225 GTXE3_CHANNEL_X0Y7 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC L4 } [get_ports {pcie_tx_p[0]}] ;# MGTHTXP3_225 GTXE3_CHANNEL_X0Y7 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC L3 } [get_ports {pcie_tx_n[0]}] ;# MGTHTXN3_225 GTXE3_CHANNEL_X0Y7 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC P6 } [get_ports {pcie_rx_p[1]}] ;# MGTHRXP2_225 GTXE3_CHANNEL_X0Y6 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC P5 } [get_ports {pcie_rx_n[1]}] ;# MGTHRXN2_225 GTXE3_CHANNEL_X0Y6 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC M2 } [get_ports {pcie_tx_p[1]}] ;# MGTHTXP2_225 GTXE3_CHANNEL_X0Y6 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC M1 } [get_ports {pcie_tx_n[1]}] ;# MGTHTXN2_225 GTXE3_CHANNEL_X0Y6 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC R4 } [get_ports {pcie_rx_p[2]}] ;# MGTHRXP1_225 GTXE3_CHANNEL_X0Y5 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC R3 } [get_ports {pcie_rx_n[2]}] ;# MGTHRXN1_225 GTXE3_CHANNEL_X0Y5 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC N4 } [get_ports {pcie_tx_p[2]}] ;# MGTHTXP1_225 GTXE3_CHANNEL_X0Y5 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC N3 } [get_ports {pcie_tx_n[2]}] ;# MGTHTXN1_225 GTXE3_CHANNEL_X0Y5 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC T6 } [get_ports {pcie_rx_p[3]}] ;# MGTHRXP0_225 GTXE3_CHANNEL_X0Y4 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC T5 } [get_ports {pcie_rx_n[3]}] ;# MGTHRXN0_225 GTXE3_CHANNEL_X0Y4 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC P2 } [get_ports {pcie_tx_p[3]}] ;# MGTHTXP0_225 GTXE3_CHANNEL_X0Y4 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC P1 } [get_ports {pcie_tx_n[3]}] ;# MGTHTXN0_225 GTXE3_CHANNEL_X0Y4 / GTXE3_COMMON_X0Y1 +#set_property -dict {LOC V6 } [get_ports {pcie_rx_p[4]}] ;# MGTHRXP3_224 GTXE3_CHANNEL_X0Y3 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC V5 } [get_ports {pcie_rx_n[4]}] ;# MGTHRXN3_224 GTXE3_CHANNEL_X0Y3 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC T2 } [get_ports {pcie_tx_p[4]}] ;# MGTHTXP3_224 GTXE3_CHANNEL_X0Y3 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC T1 } [get_ports {pcie_tx_n[4]}] ;# MGTHTXN3_224 GTXE3_CHANNEL_X0Y3 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC W4 } [get_ports {pcie_rx_p[5]}] ;# MGTHRXP2_224 GTXE3_CHANNEL_X0Y2 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC W3 } [get_ports {pcie_rx_n[5]}] ;# MGTHRXN2_224 GTXE3_CHANNEL_X0Y2 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC U4 } [get_ports {pcie_tx_p[5]}] ;# MGTHTXP2_224 GTXE3_CHANNEL_X0Y2 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC U3 } [get_ports {pcie_tx_n[5]}] ;# MGTHTXN2_224 GTXE3_CHANNEL_X0Y2 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC Y6 } [get_ports {pcie_rx_p[6]}] ;# MGTHRXP1_224 GTXE3_CHANNEL_X0Y1 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC Y5 } [get_ports {pcie_rx_n[6]}] ;# MGTHRXN1_224 GTXE3_CHANNEL_X0Y1 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC V2 } [get_ports {pcie_tx_p[6]}] ;# MGTHTXP1_224 GTXE3_CHANNEL_X0Y1 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC V1 } [get_ports {pcie_tx_n[6]}] ;# MGTHTXN1_224 GTXE3_CHANNEL_X0Y1 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC AA4 } [get_ports {pcie_rx_p[7]}] ;# MGTHRXP0_224 GTXE3_CHANNEL_X0Y0 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC AA3 } [get_ports {pcie_rx_n[7]}] ;# MGTHRXN0_224 GTXE3_CHANNEL_X0Y0 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC Y2 } [get_ports {pcie_tx_p[7]}] ;# MGTHTXP0_224 GTXE3_CHANNEL_X0Y0 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC Y1 } [get_ports {pcie_tx_n[7]}] ;# MGTHTXN0_224 GTXE3_CHANNEL_X0Y0 / GTXE3_COMMON_X0Y0 +#set_property -dict {LOC U8 } [get_ports pcie_mgt_refclk_p] ;# MGTREFCLK0P_225 +#set_property -dict {LOC U7 } [get_ports pcie_mgt_refclk_n] ;# MGTREFCLK0N_225 +#set_property -dict {LOC G25 IOSTANDARD LVCMOS25 PULLUP true} [get_ports pcie_reset_n] + +# 100 MHz MGT reference clock +#create_clock -period 10 -name pcie_mgt_refclk [get_ports pcie_mgt_refclk_p] + +#set_false_path -from [get_ports {pcie_reset_n}] +#set_input_delay 0 [get_ports {pcie_reset_n}] diff --git a/src/eth/example/KC705/fpga_10g/fpga_gmii/Makefile b/src/eth/example/KC705/fpga_10g/fpga_gmii/Makefile new file mode 100644 index 0000000..81e8eea --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/fpga_gmii/Makefile @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: MIT +# +# Copyright (c) 2025 FPGA Ninja, LLC +# +# Authors: +# - Alex Forencich +# + +# FPGA settings +FPGA_PART = xc7k325tffg900-2 +FPGA_TOP = fpga +FPGA_ARCH = kintex7 + +RTL_DIR = ../rtl +LIB_DIR = ../lib +TAXI_SRC_DIR = $(LIB_DIR)/taxi/src + +# Files for synthesis +SYN_FILES = $(RTL_DIR)/fpga.sv +SYN_FILES += $(RTL_DIR)/fpga_core.sv +SYN_FILES += $(RTL_DIR)/si5324_i2c_init.sv +SYN_FILES += $(TAXI_SRC_DIR)/eth/rtl/us/taxi_eth_mac_25g_us.f +SYN_FILES += $(TAXI_SRC_DIR)/eth/rtl/taxi_eth_mac_1g_gmii_fifo.f +SYN_FILES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_if_uart.f +SYN_FILES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_switch.sv +SYN_FILES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_mod_i2c_master.f +SYN_FILES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_mod_stats.f +SYN_FILES += $(TAXI_SRC_DIR)/sync/rtl/taxi_sync_reset.sv +SYN_FILES += $(TAXI_SRC_DIR)/sync/rtl/taxi_sync_signal.sv +SYN_FILES += $(TAXI_SRC_DIR)/io/rtl/taxi_debounce_switch.sv + +# XDC files +XDC_FILES = ../fpga.xdc +XDC_FILES += ../eth_gmii.xdc +XDC_FILES += $(TAXI_SRC_DIR)/eth/syn/vivado/taxi_eth_phy_10g_7_gt.tcl +XDC_FILES += $(TAXI_SRC_DIR)/eth/syn/vivado/taxi_eth_mac_fifo.tcl +XDC_FILES += $(TAXI_SRC_DIR)/axis/syn/vivado/taxi_axis_async_fifo.tcl +XDC_FILES += $(TAXI_SRC_DIR)/sync/syn/vivado/taxi_sync_reset.tcl +XDC_FILES += $(TAXI_SRC_DIR)/sync/syn/vivado/taxi_sync_signal.tcl + +# IP +#IP_TCL_FILES = ../ip/sgmii_pcs_pma_0.tcl + +# Configuration +CONFIG_TCL_FILES = config.tcl + +include ../common/vivado.mk + +program: $(PROJECT).bit + echo "open_hw_manager" > program.tcl + echo "connect_hw_server" >> program.tcl + echo "open_hw_target" >> program.tcl + echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl + echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl + echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl + echo "program_hw_devices [current_hw_device]" >> program.tcl + echo "exit" >> program.tcl + vivado -nojournal -nolog -mode batch -source program.tcl diff --git a/src/eth/example/KC705/fpga_10g/fpga_gmii/config.tcl b/src/eth/example/KC705/fpga_10g/fpga_gmii/config.tcl new file mode 100644 index 0000000..2e9ba7a --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/fpga_gmii/config.tcl @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: MIT +# +# Copyright (c) 2025 FPGA Ninja, LLC +# +# Authors: +# - Alex Forencich +# + +set params [dict create] + +# Type of PHY on RJ-45 10/100/1000BASE-T port (GMII or RGMII) +dict set params BASET_PHY_TYPE "GMII" + +# Invert polarity for SFP+ cage +# KC705 rev 1.0: diff pairs to SFP+ are polarity-swapped +dict set params SFP_INVERT "1" +# KC705 rev 1.1: diff pairs to SFP+ are correct +#dict set params SFP_INVERT "0" + +# 10G MAC configuration +dict set params CFG_LOW_LATENCY "1" +dict set params COMBINED_MAC_PCS "1" + +# apply parameters to top-level +set param_list {} +dict for {name value} $params { + lappend param_list $name=$value +} + +set_property generic $param_list [get_filesets sources_1] diff --git a/src/eth/example/KC705/fpga_10g/fpga_rgmii/Makefile b/src/eth/example/KC705/fpga_10g/fpga_rgmii/Makefile new file mode 100644 index 0000000..40614de --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/fpga_rgmii/Makefile @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: MIT +# +# Copyright (c) 2025 FPGA Ninja, LLC +# +# Authors: +# - Alex Forencich +# + +# FPGA settings +FPGA_PART = xc7k325tffg900-2 +FPGA_TOP = fpga +FPGA_ARCH = kintex7 + +RTL_DIR = ../rtl +LIB_DIR = ../lib +TAXI_SRC_DIR = $(LIB_DIR)/taxi/src + +# Files for synthesis +SYN_FILES = $(RTL_DIR)/fpga.sv +SYN_FILES += $(RTL_DIR)/fpga_core.sv +SYN_FILES += $(RTL_DIR)/si5324_i2c_init.sv +SYN_FILES += $(TAXI_SRC_DIR)/eth/rtl/taxi_eth_mac_1g_fifo.f +SYN_FILES += $(TAXI_SRC_DIR)/eth/rtl/taxi_eth_mac_1g_rgmii_fifo.f +SYN_FILES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_if_uart.f +SYN_FILES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_switch.sv +SYN_FILES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_mod_i2c_master.f +SYN_FILES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_mod_stats.f +SYN_FILES += $(TAXI_SRC_DIR)/sync/rtl/taxi_sync_reset.sv +SYN_FILES += $(TAXI_SRC_DIR)/sync/rtl/taxi_sync_signal.sv +SYN_FILES += $(TAXI_SRC_DIR)/io/rtl/taxi_debounce_switch.sv + +# XDC files +XDC_FILES = ../fpga.xdc +XDC_FILES += ../eth_rgmii.xdc +XDC_FILES += $(TAXI_SRC_DIR)/eth/syn/vivado/taxi_rgmii_phy_if.tcl +XDC_FILES += $(TAXI_SRC_DIR)/eth/syn/vivado/taxi_eth_mac_fifo.tcl +XDC_FILES += $(TAXI_SRC_DIR)/axis/syn/vivado/taxi_axis_async_fifo.tcl +XDC_FILES += $(TAXI_SRC_DIR)/sync/syn/vivado/taxi_sync_reset.tcl +XDC_FILES += $(TAXI_SRC_DIR)/sync/syn/vivado/taxi_sync_signal.tcl + +# IP +#IP_TCL_FILES = ../ip/sgmii_pcs_pma_0.tcl + +# Configuration +CONFIG_TCL_FILES = ./config.tcl + +include ../common/vivado.mk + +program: $(PROJECT).bit + echo "open_hw_manager" > program.tcl + echo "connect_hw_server" >> program.tcl + echo "open_hw_target" >> program.tcl + echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl + echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl + echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl + echo "program_hw_devices [current_hw_device]" >> program.tcl + echo "exit" >> program.tcl + vivado -nojournal -nolog -mode batch -source program.tcl diff --git a/src/eth/example/KC705/fpga_10g/fpga_rgmii/config.tcl b/src/eth/example/KC705/fpga_10g/fpga_rgmii/config.tcl new file mode 100644 index 0000000..10ad611 --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/fpga_rgmii/config.tcl @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: MIT +# +# Copyright (c) 2025 FPGA Ninja, LLC +# +# Authors: +# - Alex Forencich +# + +set params [dict create] + +# Type of PHY on RJ-45 10/100/1000BASE-T port (GMII or RGMII) +dict set params BASET_PHY_TYPE "RGMII" + +# Invert polarity for SFP+ cage +# KC705 rev 1.0: diff pairs to SFP+ are polarity-swapped +dict set params SFP_INVERT "1" +# KC705 rev 1.1: diff pairs to SFP+ are correct +#dict set params SFP_INVERT "0" + +# 10G MAC configuration +dict set params CFG_LOW_LATENCY "1" +dict set params COMBINED_MAC_PCS "1" + +# apply parameters to top-level +set param_list {} +dict for {name value} $params { + lappend param_list $name=$value +} + +set_property generic $param_list [get_filesets sources_1] diff --git a/src/eth/example/KC705/fpga_10g/lib/taxi b/src/eth/example/KC705/fpga_10g/lib/taxi new file mode 120000 index 0000000..477cbaa --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/lib/taxi @@ -0,0 +1 @@ +../../../../../../ \ No newline at end of file diff --git a/src/eth/example/KC705/fpga_10g/rtl/fpga.sv b/src/eth/example/KC705/fpga_10g/rtl/fpga.sv new file mode 100644 index 0000000..a281307 --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/rtl/fpga.sv @@ -0,0 +1,556 @@ +// SPDX-License-Identifier: MIT +/* + +Copyright (c) 2014-2025 FPGA Ninja, LLC + +Authors: +- Alex Forencich + +*/ + +`resetall +`timescale 1ns / 1ps +`default_nettype none + +/* + * FPGA top-level module + */ +module fpga # +( + // simulation (set to avoid vendor primitives) + parameter logic SIM = 1'b0, + // vendor ("GENERIC", "XILINX", "ALTERA") + parameter string VENDOR = "XILINX", + // device family + parameter string FAMILY = "kintex7", + // Use 90 degree clock for RGMII transmit + parameter logic USE_CLK90 = 1'b1, + // BASE-T PHY type (GMII, RGMII) + parameter BASET_PHY_TYPE = "GMII", + // SFP rate selection (0 for 1G, 1 for 10G) + parameter logic SFP_RATE = 1'b1, + // Invert SFP data pins + parameter logic SFP_INVERT = 1'b1, + // 10G MAC configuration + parameter logic CFG_LOW_LATENCY = 1'b1, + parameter logic COMBINED_MAC_PCS = 1'b1 +) +( + /* + * Clock: 200MHz + * Reset: Push button, active high + */ + input wire logic clk_200mhz_p, + input wire logic clk_200mhz_n, + input wire logic reset, + + /* + * GPIO + */ + input wire logic btnu, + input wire logic btnl, + input wire logic btnd, + input wire logic btnr, + input wire logic btnc, + input wire logic [3:0] sw, + output wire logic [7:0] led, + + /* + * UART: 115200 bps, 8N1 + */ + input wire logic uart_rxd, + output wire logic uart_txd, + input wire logic uart_rts, + output wire logic uart_cts, + + /* + * I2C + */ + inout wire logic i2c_scl, + inout wire logic i2c_sda, + output wire logic i2c_mux_reset, + + /* + * Ethernet: SFP+ + */ + input wire logic sfp_rx_p, + input wire logic sfp_rx_n, + output wire logic sfp_tx_p, + output wire logic sfp_tx_n, + input wire logic sfp_mgt_refclk_p, + input wire logic sfp_mgt_refclk_n, + + output wire logic si5324_rst, + input wire logic si5324_int, + + output wire logic sfp_tx_disable_b, + + /* + * Ethernet: 1000BASE-T GMII or RGMII + */ + input wire logic phy_rx_clk, + input wire logic [7:0] phy_rxd, + input wire logic phy_rx_dv, + input wire logic phy_rx_er, + output wire logic phy_gtx_clk, + input wire logic phy_tx_clk, + output wire logic [7:0] phy_txd, + output wire logic phy_tx_en, + output wire logic phy_tx_er, + output wire logic phy_reset_n, + input wire logic phy_int_n +); + +// Clock and reset + +wire clk_200mhz_ibufg; + +// Internal 125 MHz clock +wire clk_mmcm_out; +wire clk_int; +wire clk90_mmcm_out; +wire clk90_int; +wire rst_int; + +wire clk_200mhz_mmcm_out; +wire clk_200mhz_int; + +wire mmcm_rst = reset; +wire mmcm_locked; +wire mmcm_clkfb; + +IBUFGDS +clk_200mhz_ibufgds_inst( + .I(clk_200mhz_p), + .IB(clk_200mhz_n), + .O(clk_200mhz_ibufg) +); + +// MMCM instance +MMCME2_BASE #( + // 200 MHz input + .CLKIN1_PERIOD(5.0), + .REF_JITTER1(0.010), + // 200 MHz input / 1 = 200 MHz PFD (range 10 MHz to 500 MHz) + .DIVCLK_DIVIDE(1), + // 200 MHz PFD * 5 = 1000 MHz VCO (range 600 MHz to 1440 MHz) + .CLKFBOUT_MULT_F(5), + .CLKFBOUT_PHASE(0), + // 1000 MHz VCO / 8 = 125 MHz, 0 degrees + .CLKOUT0_DIVIDE_F(8), + .CLKOUT0_DUTY_CYCLE(0.5), + .CLKOUT0_PHASE(0), + // 1000 MHz VCO / 8 = 125 MHz, 90 degrees + .CLKOUT1_DIVIDE(8), + .CLKOUT1_DUTY_CYCLE(0.5), + .CLKOUT1_PHASE(90), + // 1000 MHz VCO / 5 = 200 MHz, 0 degrees + .CLKOUT2_DIVIDE(5), + .CLKOUT2_DUTY_CYCLE(0.5), + .CLKOUT2_PHASE(0), + // Not used + .CLKOUT3_DIVIDE(1), + .CLKOUT3_DUTY_CYCLE(0.5), + .CLKOUT3_PHASE(0), + // Not used + .CLKOUT4_DIVIDE(1), + .CLKOUT4_DUTY_CYCLE(0.5), + .CLKOUT4_PHASE(0), + .CLKOUT4_CASCADE("FALSE"), + // Not used + .CLKOUT5_DIVIDE(1), + .CLKOUT5_DUTY_CYCLE(0.5), + .CLKOUT5_PHASE(0), + // Not used + .CLKOUT6_DIVIDE(1), + .CLKOUT6_DUTY_CYCLE(0.5), + .CLKOUT6_PHASE(0), + + // optimized bandwidth + .BANDWIDTH("OPTIMIZED"), + // don't wait for lock during startup + .STARTUP_WAIT("FALSE") +) +clk_mmcm_inst ( + // 200 MHz input + .CLKIN1(clk_200mhz_ibufg), + // direct clkfb feeback + .CLKFBIN(mmcm_clkfb), + .CLKFBOUT(mmcm_clkfb), + .CLKFBOUTB(), + // 125 MHz, 0 degrees + .CLKOUT0(clk_mmcm_out), + .CLKOUT0B(), + // 125 MHz, 90 degrees + .CLKOUT1(clk90_mmcm_out), + .CLKOUT1B(), + // 200 MHz, 0 degrees + .CLKOUT2(clk_200mhz_mmcm_out), + .CLKOUT2B(), + // Not used + .CLKOUT3(), + .CLKOUT3B(), + // Not used + .CLKOUT4(), + // Not used + .CLKOUT5(), + // Not used + .CLKOUT6(), + // reset input + .RST(mmcm_rst), + // don't power down + .PWRDWN(1'b0), + // locked output + .LOCKED(mmcm_locked) +); + +BUFG +clk_bufg_inst ( + .I(clk_mmcm_out), + .O(clk_int) +); + +BUFG +clk90_bufg_inst ( + .I(clk90_mmcm_out), + .O(clk90_int) +); + +BUFG +clk_200mhz_bufg_inst ( + .I(clk_200mhz_mmcm_out), + .O(clk_200mhz_int) +); + +taxi_sync_reset #( + .N(4) +) +sync_reset_inst ( + .clk(clk_int), + .rst(~mmcm_locked), + .out(rst_int) +); + +// GPIO +wire btnu_int; +wire btnl_int; +wire btnd_int; +wire btnr_int; +wire btnc_int; +wire [3:0] sw_int; + +taxi_debounce_switch #( + .WIDTH(9), + .N(4), + .RATE(125000) +) +debounce_switch_inst ( + .clk(clk_int), + .rst(rst_int), + .in({btnu, + btnl, + btnd, + btnr, + btnc, + sw}), + .out({btnu_int, + btnl_int, + btnd_int, + btnr_int, + btnc_int, + sw_int}) +); + +wire uart_rxd_int; +wire uart_rts_int; + +taxi_sync_signal #( + .WIDTH(2), + .N(2) +) +sync_signal_inst ( + .clk(clk_int), + .in({uart_rxd, uart_rts}), + .out({uart_rxd_int, uart_rts_int}) +); + +// I2C +wire i2c_scl_i; +wire i2c_scl_o; +wire i2c_sda_i; +wire i2c_sda_o; + +assign i2c_scl_i = i2c_scl; +assign i2c_scl = i2c_scl_o ? 1'bz : 1'b0; +assign i2c_sda_i = i2c_sda; +assign i2c_sda = i2c_sda_o ? 1'bz : 1'b0; + +wire i2c_init_scl_i = i2c_scl_i; +wire i2c_init_scl_o; +wire i2c_init_sda_i = i2c_sda_i; +wire i2c_init_sda_o; + +wire i2c_int_scl_i = i2c_scl_i; +wire i2c_int_scl_o; +wire i2c_int_sda_i = i2c_sda_i; +wire i2c_int_sda_o; + +assign i2c_scl_o = i2c_init_scl_o & i2c_int_scl_o; +assign i2c_sda_o = i2c_init_sda_o & i2c_int_sda_o; + +// Si5324 init +taxi_axis_if #(.DATA_W(12)) si5324_i2c_cmd(); +taxi_axis_if #(.DATA_W(8)) si5324_i2c_tx(); +taxi_axis_if #(.DATA_W(8)) si5324_i2c_rx(); + +assign si5324_i2c_rx.tready = 1'b1; + +wire si5324_i2c_busy; + +assign si5324_rst = ~rst_int; + +taxi_i2c_master +si5324_i2c_master_inst ( + .clk(clk_int), + .rst(rst_int), + + /* + * Host interface + */ + .s_axis_cmd(si5324_i2c_cmd), + .s_axis_tx(si5324_i2c_tx), + .m_axis_rx(si5324_i2c_rx), + + /* + * I2C interface + */ + .scl_i(i2c_init_scl_i), + .scl_o(i2c_init_scl_o), + .sda_i(i2c_init_sda_i), + .sda_o(i2c_init_sda_o), + + /* + * Status + */ + .busy(), + .bus_control(), + .bus_active(), + .missed_ack(), + + /* + * Configuration + */ + .prescale(SIM ? 32 : 312), + .stop_on_idle(1) +); + +si5324_i2c_init #( + .SIM_SPEEDUP(SIM) +) +si5324_i2c_init_inst ( + .clk(clk_int), + .rst(rst_int), + + /* + * I2C master interface + */ + .m_axis_cmd(si5324_i2c_cmd), + .m_axis_tx(si5324_i2c_tx), + + /* + * Status + */ + .busy(si5324_i2c_busy), + + /* + * Configuration + */ + .start(1'b1) +); + +wire phy_rgmii_rx_clk_int; +wire [3:0] phy_rgmii_rxd_int; +wire phy_rgmii_rx_ctl_int; +wire phy_rgmii_tx_clk_int; +wire [3:0] phy_rgmii_txd_int; +wire phy_rgmii_tx_ctl_int; + +wire phy_gmii_rx_clk_int; +wire [7:0] phy_gmii_rxd_int; +wire phy_gmii_rx_dv_int; +wire phy_gmii_rx_er_int; +wire phy_gmii_gtx_clk_int; +wire phy_gmii_tx_clk_int; +wire [7:0] phy_gmii_txd_int; +wire phy_gmii_tx_en_int; +wire phy_gmii_tx_er_int; + +if (BASET_PHY_TYPE == "RGMII") begin : phy_if + + assign phy_rgmii_rx_clk_int = phy_rx_clk; + + // IODELAY elements for RGMII interface to PHY + IDELAYCTRL + idelayctrl_inst ( + .REFCLK(clk_200mhz_int), + .RST(rst_int), + .RDY() + ); + + for (genvar n = 0; n < 4; n = n + 1) begin : phy_rxd_idelay_bit + + IDELAYE2 #( + .IDELAY_TYPE("FIXED") + ) + idelay_inst ( + .IDATAIN(phy_rxd[n]), + .DATAOUT(phy_rgmii_rxd_int[n]), + .DATAIN(1'b0), + .C(1'b0), + .CE(1'b0), + .INC(1'b0), + .CINVCTRL(1'b0), + .CNTVALUEIN(5'd0), + .CNTVALUEOUT(), + .LD(1'b0), + .LDPIPEEN(1'b0), + .REGRST(1'b0) + ); + + end + + IDELAYE2 #( + .IDELAY_TYPE("FIXED") + ) + phy_rx_ctl_idelay ( + .IDATAIN(phy_rx_dv), + .DATAOUT(phy_rgmii_rx_ctl_int), + .DATAIN(1'b0), + .C(1'b0), + .CE(1'b0), + .INC(1'b0), + .CINVCTRL(1'b0), + .CNTVALUEIN(5'd0), + .CNTVALUEOUT(), + .LD(1'b0), + .LDPIPEEN(1'b0), + .REGRST(1'b0) + ); + + assign phy_gtx_clk = phy_rgmii_tx_clk_int; + assign phy_txd[3:0] = phy_rgmii_txd_int; + assign phy_tx_en = phy_rgmii_tx_ctl_int; + + assign phy_txd[7:4] = '0; + assign phy_tx_er = 1'b0; + + assign phy_gmii_rx_clk_int = 1'b0; + assign phy_gmii_rxd_int = '0; + assign phy_gmii_rx_dv_int = 1'b0; + assign phy_gmii_rx_er_int = 1'b0; + assign phy_gmii_tx_clk_int = 1'b0; + +end else begin : phy_if + + assign phy_rgmii_rx_clk_int = 1'b0; + assign phy_rgmii_rxd_int = '0; + assign phy_rgmii_rx_ctl_int = 1'b0; + + assign phy_gmii_rx_clk_int = phy_rx_clk; + assign phy_gmii_rxd_int = phy_rxd; + assign phy_gmii_rx_dv_int = phy_rx_dv; + assign phy_gmii_rx_er_int = phy_rx_er; + + assign phy_gtx_clk = phy_gmii_gtx_clk_int; + assign phy_gmii_tx_clk_int = phy_tx_clk; + assign phy_txd = phy_gmii_txd_int; + assign phy_tx_en = phy_gmii_tx_en_int; + assign phy_tx_er = phy_gmii_tx_er_int; + +end + +fpga_core #( + .SIM(SIM), + .VENDOR(VENDOR), + .FAMILY(FAMILY), + .USE_CLK90(USE_CLK90), + .BASET_PHY_TYPE(BASET_PHY_TYPE), + .SFP_INVERT(SFP_INVERT), + .CFG_LOW_LATENCY(CFG_LOW_LATENCY), + .COMBINED_MAC_PCS(COMBINED_MAC_PCS) +) +core_inst ( + /* + * Clock: 125MHz + * Synchronous reset + */ + .clk(clk_int), + .clk90(clk90_int), + .rst(rst_int), + + /* + * GPIO + */ + .btnu(btnu_int), + .btnl(btnl_int), + .btnd(btnd_int), + .btnr(btnr_int), + .btnc(btnc_int), + .sw(sw_int), + .led(led), + + /* + * UART: 115200 bps, 8N1 + */ + .uart_rxd(uart_rxd_int), + .uart_txd(uart_txd), + .uart_rts(uart_rts_int), + .uart_cts(uart_cts), + + /* + * I2C + */ + .i2c_scl_i(i2c_int_scl_i), + .i2c_scl_o(i2c_int_scl_o), + .i2c_sda_i(i2c_int_sda_i), + .i2c_sda_o(i2c_int_sda_o), + + /* + * Ethernet: SFP+ + */ + .sfp_rx_p(sfp_rx_p), + .sfp_rx_n(sfp_rx_n), + .sfp_tx_p(sfp_tx_p), + .sfp_tx_n(sfp_tx_n), + .sfp_mgt_refclk_p(sfp_mgt_refclk_p), + .sfp_mgt_refclk_n(sfp_mgt_refclk_n), + + .sfp_tx_disable_b(sfp_tx_disable_b), + + /* + * Ethernet: 1000BASE-T GMII/RGMII/SGMII + */ + .phy_rgmii_rx_clk(phy_rgmii_rx_clk_int), + .phy_rgmii_rxd(phy_rgmii_rxd_int), + .phy_rgmii_rx_ctl(phy_rgmii_rx_ctl_int), + .phy_rgmii_tx_clk(phy_rgmii_tx_clk_int), + .phy_rgmii_txd(phy_rgmii_txd_int), + .phy_rgmii_tx_ctl(phy_rgmii_tx_ctl_int), + + .phy_gmii_rx_clk(phy_gmii_rx_clk_int), + .phy_gmii_rxd(phy_gmii_rxd_int), + .phy_gmii_rx_dv(phy_gmii_rx_dv_int), + .phy_gmii_rx_er(phy_gmii_rx_er_int), + .phy_gmii_gtx_clk(phy_gmii_gtx_clk_int), + .phy_gmii_tx_clk(phy_gmii_tx_clk_int), + .phy_gmii_txd(phy_gmii_txd_int), + .phy_gmii_tx_en(phy_gmii_tx_en_int), + .phy_gmii_tx_er(phy_gmii_tx_er_int), + + .phy_reset_n(phy_reset_n), + .phy_int_n(phy_int_n) +); + +endmodule + +`resetall diff --git a/src/eth/example/KC705/fpga_10g/rtl/fpga_core.sv b/src/eth/example/KC705/fpga_10g/rtl/fpga_core.sv new file mode 100644 index 0000000..5f756f2 --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/rtl/fpga_core.sv @@ -0,0 +1,766 @@ +// SPDX-License-Identifier: MIT +/* + +Copyright (c) 2014-2025 FPGA Ninja, LLC + +Authors: +- Alex Forencich + +*/ + +`resetall +`timescale 1ns / 1ps +`default_nettype none + +/* + * FPGA core logic + */ +module fpga_core # +( + // simulation (set to avoid vendor primitives) + parameter logic SIM = 1'b0, + // vendor ("GENERIC", "XILINX", "ALTERA") + parameter string VENDOR = "XILINX", + // device family + parameter string FAMILY = "kintex7", + // Use 90 degree clock for RGMII transmit + parameter logic USE_CLK90 = 1'b1, + // BASE-T PHY type (GMII or RGMII) + parameter BASET_PHY_TYPE = "GMII", + // Invert SFP data pins + parameter logic SFP_INVERT = 1'b1, + // 10G MAC configuration + parameter logic CFG_LOW_LATENCY = 1'b1, + parameter logic COMBINED_MAC_PCS = 1'b1, + parameter MAC_DATA_W = 32 +) +( + /* + * Clock: 125MHz + * Synchronous reset + */ + input wire logic clk, + input wire logic clk90, + input wire logic rst, + + /* + * GPIO + */ + input wire logic btnu, + input wire logic btnl, + input wire logic btnd, + input wire logic btnr, + input wire logic btnc, + input wire logic [7:0] sw, + output wire logic [7:0] led, + + /* + * UART: 115200 bps, 8N1 + */ + input wire logic uart_rxd, + output wire logic uart_txd, + input wire logic uart_rts, + output wire logic uart_cts, + + /* + * I2C + */ + input wire logic i2c_scl_i, + output wire logic i2c_scl_o, + input wire logic i2c_sda_i, + output wire logic i2c_sda_o, + + /* + * Ethernet: SFP+ + */ + input wire logic sfp_rx_p, + input wire logic sfp_rx_n, + output wire logic sfp_tx_p, + output wire logic sfp_tx_n, + input wire logic sfp_mgt_refclk_p, + input wire logic sfp_mgt_refclk_n, + + output wire logic sfp_tx_disable_b, + + /* + * Ethernet: 1000BASE-T + */ + input wire logic phy_rgmii_rx_clk, + input wire logic [3:0] phy_rgmii_rxd, + input wire logic phy_rgmii_rx_ctl, + output wire logic phy_rgmii_tx_clk, + output wire logic [3:0] phy_rgmii_txd, + output wire logic phy_rgmii_tx_ctl, + + input wire logic phy_gmii_rx_clk, + input wire logic [7:0] phy_gmii_rxd, + input wire logic phy_gmii_rx_dv, + input wire logic phy_gmii_rx_er, + output wire logic phy_gmii_gtx_clk, + input wire logic phy_gmii_tx_clk, + output wire logic [7:0] phy_gmii_txd, + output wire logic phy_gmii_tx_en, + output wire logic phy_gmii_tx_er, + + output wire logic phy_reset_n, + input wire logic phy_int_n +); + +assign led = sw; + +// XFCP +assign uart_cts = 1'b0; + +taxi_axis_if #(.DATA_W(8), .USER_EN(1), .USER_W(1)) xfcp_ds(), xfcp_us(); + +taxi_xfcp_if_uart #( + .TX_FIFO_DEPTH(512), + .RX_FIFO_DEPTH(512) +) +xfcp_if_uart_inst ( + .clk(clk), + .rst(rst), + + /* + * UART interface + */ + .uart_rxd(uart_rxd), + .uart_txd(uart_txd), + + /* + * XFCP downstream interface + */ + .xfcp_dsp_ds(xfcp_ds), + .xfcp_dsp_us(xfcp_us), + + /* + * Configuration + */ + .prescale(16'(125000000/921600)) +); + +taxi_axis_if #(.DATA_W(8), .USER_EN(1), .USER_W(1)) xfcp_sw_ds[2](), xfcp_sw_us[2](); + +taxi_xfcp_switch #( + .XFCP_ID_STR("KC705"), + .XFCP_EXT_ID(0), + .XFCP_EXT_ID_STR("Taxi example"), + .PORTS($size(xfcp_sw_us)) +) +xfcp_sw_inst ( + .clk(clk), + .rst(rst), + + /* + * XFCP upstream port + */ + .xfcp_usp_ds(xfcp_ds), + .xfcp_usp_us(xfcp_us), + + /* + * XFCP downstream ports + */ + .xfcp_dsp_ds(xfcp_sw_ds), + .xfcp_dsp_us(xfcp_sw_us) +); + +taxi_axis_if #(.DATA_W(16), .KEEP_W(1), .KEEP_EN(0), .LAST_EN(0), .USER_EN(1), .USER_W(1), .ID_EN(1), .ID_W(10)) axis_stat(); + +taxi_xfcp_mod_stats #( + .XFCP_ID_STR("Statistics"), + .XFCP_EXT_ID(0), + .XFCP_EXT_ID_STR(""), + .STAT_COUNT_W(64), + .STAT_PIPELINE(2) +) +xfcp_stats_inst ( + .clk(clk), + .rst(rst), + + /* + * XFCP upstream port + */ + .xfcp_usp_ds(xfcp_sw_ds[0]), + .xfcp_usp_us(xfcp_sw_us[0]), + + /* + * Statistics increment input + */ + .s_axis_stat(axis_stat) +); + +taxi_axis_if #(.DATA_W(16), .KEEP_W(1), .KEEP_EN(0), .LAST_EN(0), .USER_EN(1), .USER_W(1), .ID_EN(1), .ID_W(10)) axis_eth_stat[2](); + +taxi_axis_arb_mux #( + .S_COUNT($size(axis_eth_stat)), + .UPDATE_TID(1'b0), + .ARB_ROUND_ROBIN(1'b1), + .ARB_LSB_HIGH_PRIO(1'b0) +) +stat_mux_inst ( + .clk(clk), + .rst(rst), + + /* + * AXI4-Stream inputs (sink) + */ + .s_axis(axis_eth_stat), + + /* + * AXI4-Stream output (source) + */ + .m_axis(axis_stat) +); + +// I2C +taxi_xfcp_mod_i2c_master #( + .XFCP_EXT_ID_STR("I2C"), + .DEFAULT_PRESCALE(16'(125000000/200000/4)) +) +xfcp_mod_i2c_inst ( + .clk(clk), + .rst(rst), + + /* + * XFCP upstream port + */ + .xfcp_usp_ds(xfcp_sw_ds[1]), + .xfcp_usp_us(xfcp_sw_us[1]), + + /* + * I2C interface + */ + .i2c_scl_i(i2c_scl_i), + .i2c_scl_o(i2c_scl_o), + .i2c_sda_i(i2c_sda_i), + .i2c_sda_o(i2c_sda_o) +); + +// BASE-T PHY +assign phy_reset_n = !rst; + +taxi_axis_if #(.DATA_W(8), .ID_W(8), .USER_EN(1), .USER_W(1)) axis_eth(); +taxi_axis_if #(.DATA_W(96), .KEEP_W(1), .ID_W(8)) axis_tx_cpl(); + +if (BASET_PHY_TYPE == "GMII") begin : baset_mac_gmii + + taxi_eth_mac_1g_gmii_fifo #( + .SIM(SIM), + .VENDOR(VENDOR), + .FAMILY(FAMILY), + .PADDING_EN(1), + .MIN_FRAME_LEN(64), + .STAT_EN(1), + .STAT_TX_LEVEL(1), + .STAT_RX_LEVEL(1), + .STAT_ID_BASE(0), + .STAT_UPDATE_PERIOD(1024), + .STAT_STR_EN(1), + .STAT_PREFIX_STR("GMII0"), + .TX_FIFO_DEPTH(16384), + .TX_FRAME_FIFO(1), + .RX_FIFO_DEPTH(16384), + .RX_FRAME_FIFO(1) + ) + eth_mac_inst ( + .gtx_clk(clk), + .gtx_rst(rst), + .logic_clk(clk), + .logic_rst(rst), + + /* + * Transmit interface (AXI stream) + */ + .s_axis_tx(axis_eth), + .m_axis_tx_cpl(axis_tx_cpl), + + /* + * Receive interface (AXI stream) + */ + .m_axis_rx(axis_eth), + + /* + * GMII interface + */ + .gmii_rx_clk(phy_gmii_rx_clk), + .gmii_rxd(phy_gmii_rxd), + .gmii_rx_dv(phy_gmii_rx_dv), + .gmii_rx_er(phy_gmii_rx_er), + .gmii_tx_clk(phy_gmii_gtx_clk), + .mii_tx_clk(phy_gmii_tx_clk), + .gmii_txd(phy_gmii_txd), + .gmii_tx_en(phy_gmii_tx_en), + .gmii_tx_er(phy_gmii_tx_er), + + /* + * Statistics + */ + .stat_clk(clk), + .stat_rst(rst), + .m_axis_stat(axis_eth_stat[0]), + + /* + * Status + */ + .tx_error_underflow(), + .tx_fifo_overflow(), + .tx_fifo_bad_frame(), + .tx_fifo_good_frame(), + .rx_error_bad_frame(), + .rx_error_bad_fcs(), + .rx_fifo_overflow(), + .rx_fifo_bad_frame(), + .rx_fifo_good_frame(), + .link_speed(), + + /* + * Configuration + */ + .cfg_tx_max_pkt_len(16'd9218), + .cfg_tx_ifg(8'd12), + .cfg_tx_enable(1'b1), + .cfg_rx_max_pkt_len(16'd9218), + .cfg_rx_enable(1'b1) + ); + +end else if (BASET_PHY_TYPE == "RGMII") begin : baset_mac_rgmii + + taxi_eth_mac_1g_rgmii_fifo #( + .SIM(SIM), + .VENDOR(VENDOR), + .FAMILY(FAMILY), + .USE_CLK90(USE_CLK90), + .PADDING_EN(1), + .MIN_FRAME_LEN(64), + .STAT_EN(1), + .STAT_TX_LEVEL(1), + .STAT_RX_LEVEL(1), + .STAT_ID_BASE(0), + .STAT_UPDATE_PERIOD(1024), + .STAT_STR_EN(1), + .STAT_PREFIX_STR("RGMII0"), + .TX_FIFO_DEPTH(16384), + .TX_FRAME_FIFO(1), + .RX_FIFO_DEPTH(16384), + .RX_FRAME_FIFO(1) + ) + eth_mac_inst ( + .gtx_clk(clk), + .gtx_clk90(clk90), + .gtx_rst(rst), + .logic_clk(clk), + .logic_rst(rst), + + /* + * Transmit interface (AXI stream) + */ + .s_axis_tx(axis_eth), + .m_axis_tx_cpl(axis_tx_cpl), + + /* + * Receive interface (AXI stream) + */ + .m_axis_rx(axis_eth), + + /* + * RGMII interface + */ + .rgmii_rx_clk(phy_rgmii_rx_clk), + .rgmii_rxd(phy_rgmii_rxd), + .rgmii_rx_ctl(phy_rgmii_rx_ctl), + .rgmii_tx_clk(phy_rgmii_tx_clk), + .rgmii_txd(phy_rgmii_txd), + .rgmii_tx_ctl(phy_rgmii_tx_ctl), + + /* + * Statistics + */ + .stat_clk(clk), + .stat_rst(rst), + .m_axis_stat(axis_eth_stat[0]), + + /* + * Status + */ + .tx_error_underflow(), + .tx_fifo_overflow(), + .tx_fifo_bad_frame(), + .tx_fifo_good_frame(), + .rx_error_bad_frame(), + .rx_error_bad_fcs(), + .rx_fifo_overflow(), + .rx_fifo_bad_frame(), + .rx_fifo_good_frame(), + .link_speed(), + + /* + * Configuration + */ + .cfg_tx_max_pkt_len(16'd9218), + .cfg_tx_ifg(8'd12), + .cfg_tx_enable(1'b1), + .cfg_rx_max_pkt_len(16'd9218), + .cfg_rx_enable(1'b1) + ); + + assign phy_gmii_gtx_clk = 1'b0; + assign phy_gmii_txd = '0; + assign phy_gmii_tx_en = 1'b0; + assign phy_gmii_tx_er = 1'b0; + +end + +// SFP+ +assign sfp_tx_disable_b = 1'b1; + +wire sfp_tx_clk[1]; +wire sfp_tx_rst[1]; +wire sfp_rx_clk[1]; +wire sfp_rx_rst[1]; + +wire sfp_rx_status[1]; + +wire sfp_gtpowergood; + +wire sfp_mgt_refclk; +wire sfp_mgt_refclk_bufg; + +wire sfp_rst; + +taxi_axis_if #(.DATA_W(32), .ID_W(8), .USER_EN(1), .USER_W(1)) axis_sfp_tx[1](); +taxi_axis_if #(.DATA_W(96), .KEEP_W(1), .ID_W(8)) axis_sfp_tx_cpl[1](); +taxi_axis_if #(.DATA_W(32), .ID_W(8), .USER_EN(1), .USER_W(1)) axis_sfp_rx[1](); + +if (SIM) begin + + assign sfp_mgt_refclk = sfp_mgt_refclk_p; + assign sfp_mgt_refclk_bufg = sfp_mgt_refclk; + +end else begin + + IBUFDS_GTE2 ibufds_gte2_sfp_mgt_refclk_inst ( + .I (sfp_mgt_refclk_p), + .IB (sfp_mgt_refclk_n), + .CEB (1'b0), + .O (sfp_mgt_refclk), + .ODIV2 () + ); + + BUFG bufg_sfp_mgt_refclk_inst ( + .I (sfp_mgt_refclk), + .O (sfp_mgt_refclk_bufg) + ); + +end + +taxi_sync_reset #( + .N(4) +) +sfp_sync_reset_inst ( + .clk(sfp_mgt_refclk_bufg), + .rst(rst), + .out(sfp_rst) +); + +wire sfp_tx_p_int[1]; +wire sfp_tx_n_int[1]; + +assign sfp_tx_p = sfp_tx_p_int[0]; +assign sfp_tx_n = sfp_tx_n_int[0]; + +// synthesis translate_off +`define SIM +// synthesis translate_on + +taxi_eth_mac_25g_us #( + .SIM(SIM), + .VENDOR(VENDOR), + .FAMILY(FAMILY), + + .CNT(1), + + // GT config + .CFG_LOW_LATENCY(CFG_LOW_LATENCY), + + // GT type + .GT_TYPE("GTX"), + + // GT parameters + // workaround for verilator bug + `ifndef SIM + .GT_TX_DIFFCTRL('{1{5'd8}}), + .GT_TX_POLARITY('{1{SFP_INVERT}}), + .GT_RX_POLARITY('{1{SFP_INVERT}}), + `endif + + // MAC/PHY config + .COMBINED_MAC_PCS(COMBINED_MAC_PCS), + .DATA_W(MAC_DATA_W), + .PADDING_EN(1'b1), + .DIC_EN(1'b1), + .MIN_FRAME_LEN(64), + .PTP_TS_EN(1'b0), + .PTP_TS_FMT_TOD(1'b1), + .PTP_TS_W(96), + .PRBS31_EN(1'b0), + .TX_SERDES_PIPELINE(1), + .RX_SERDES_PIPELINE(1), + .COUNT_125US(125000/6.4), + .STAT_EN(1), + .STAT_TX_LEVEL(1), + .STAT_RX_LEVEL(1), + .STAT_ID_BASE(16+16), + .STAT_UPDATE_PERIOD(1024) + // workaround for verilator bug + `ifndef SIM + , + .STAT_STR_EN(1), + .STAT_PREFIX_STR('{"SFP"}) + `endif +) +sfp_mac_inst ( + .xcvr_ctrl_clk(clk), + .xcvr_ctrl_rst(sfp_rst), + + /* + * Common + */ + .xcvr_gtpowergood_out(sfp_gtpowergood), + .xcvr_gtrefclk00_in(sfp_mgt_refclk), + .xcvr_qpll0pd_in(1'b0), + .xcvr_qpll0reset_in(1'b0), + .xcvr_qpll0pcierate_in(3'd0), + .xcvr_qpll0lock_out(), + .xcvr_qpll0clk_out(), + .xcvr_qpll0refclk_out(), + .xcvr_gtrefclk01_in(sfp_mgt_refclk), + .xcvr_qpll1pd_in(1'b0), + .xcvr_qpll1reset_in(1'b0), + .xcvr_qpll1pcierate_in(3'd0), + .xcvr_qpll1lock_out(), + .xcvr_qpll1clk_out(), + .xcvr_qpll1refclk_out(), + + /* + * Serial data + */ + .xcvr_txp(sfp_tx_p_int), + .xcvr_txn(sfp_tx_n_int), + .xcvr_rxp('{1{sfp_rx_p}}), + .xcvr_rxn('{1{sfp_rx_n}}), + + /* + * MAC clocks + */ + .rx_clk(sfp_rx_clk), + .rx_rst_in('{1{1'b0}}), + .rx_rst_out(sfp_rx_rst), + .tx_clk(sfp_tx_clk), + .tx_rst_in('{1{1'b0}}), + .tx_rst_out(sfp_tx_rst), + .ptp_sample_clk('{1{1'b0}}), + + /* + * Transmit interface (AXI stream) + */ + .s_axis_tx(axis_sfp_tx), + .m_axis_tx_cpl(axis_sfp_tx_cpl), + + /* + * Receive interface (AXI stream) + */ + .m_axis_rx(axis_sfp_rx), + + /* + * PTP clock + */ + .tx_ptp_ts('{1{'0}}), + .tx_ptp_ts_step('{1{1'b0}}), + .rx_ptp_ts('{1{'0}}), + .rx_ptp_ts_step('{1{1'b0}}), + + /* + * Link-level Flow Control (LFC) (IEEE 802.3 annex 31B PAUSE) + */ + .tx_lfc_req('{1{1'b0}}), + .tx_lfc_resend('{1{1'b0}}), + .rx_lfc_en('{1{1'b0}}), + .rx_lfc_req(), + .rx_lfc_ack('{1{1'b0}}), + + /* + * Priority Flow Control (PFC) (IEEE 802.3 annex 31D PFC) + */ + .tx_pfc_req('{1{'0}}), + .tx_pfc_resend('{1{1'b0}}), + .rx_pfc_en('{1{'0}}), + .rx_pfc_req(), + .rx_pfc_ack('{1{'0}}), + + /* + * Pause interface + */ + .tx_lfc_pause_en('{1{1'b0}}), + .tx_pause_req('{1{1'b0}}), + .tx_pause_ack(), + + /* + * Statistics + */ + .stat_clk(clk), + .stat_rst(rst), + .m_axis_stat(axis_eth_stat[1]), + + /* + * Status + */ + .tx_start_packet(), + .stat_tx_byte(), + .stat_tx_pkt_len(), + .stat_tx_pkt_ucast(), + .stat_tx_pkt_mcast(), + .stat_tx_pkt_bcast(), + .stat_tx_pkt_vlan(), + .stat_tx_pkt_good(), + .stat_tx_pkt_bad(), + .stat_tx_err_oversize(), + .stat_tx_err_user(), + .stat_tx_err_underflow(), + .rx_start_packet(), + .rx_error_count(), + .rx_block_lock(), + .rx_high_ber(), + .rx_status(sfp_rx_status), + .stat_rx_byte(), + .stat_rx_pkt_len(), + .stat_rx_pkt_fragment(), + .stat_rx_pkt_jabber(), + .stat_rx_pkt_ucast(), + .stat_rx_pkt_mcast(), + .stat_rx_pkt_bcast(), + .stat_rx_pkt_vlan(), + .stat_rx_pkt_good(), + .stat_rx_pkt_bad(), + .stat_rx_err_oversize(), + .stat_rx_err_bad_fcs(), + .stat_rx_err_bad_block(), + .stat_rx_err_framing(), + .stat_rx_err_preamble(), + .stat_rx_fifo_drop('{1{1'b0}}), + .stat_tx_mcf(), + .stat_rx_mcf(), + .stat_tx_lfc_pkt(), + .stat_tx_lfc_xon(), + .stat_tx_lfc_xoff(), + .stat_tx_lfc_paused(), + .stat_tx_pfc_pkt(), + .stat_tx_pfc_xon(), + .stat_tx_pfc_xoff(), + .stat_tx_pfc_paused(), + .stat_rx_lfc_pkt(), + .stat_rx_lfc_xon(), + .stat_rx_lfc_xoff(), + .stat_rx_lfc_paused(), + .stat_rx_pfc_pkt(), + .stat_rx_pfc_xon(), + .stat_rx_pfc_xoff(), + .stat_rx_pfc_paused(), + + /* + * Configuration + */ + .cfg_tx_max_pkt_len('{1{16'd9218}}), + .cfg_tx_ifg('{1{8'd12}}), + .cfg_tx_enable('{1{1'b1}}), + .cfg_rx_max_pkt_len('{1{16'd9218}}), + .cfg_rx_enable('{1{1'b1}}), + .cfg_tx_prbs31_enable('{1{1'b0}}), + .cfg_rx_prbs31_enable('{1{1'b0}}), + .cfg_mcf_rx_eth_dst_mcast('{1{48'h01_80_C2_00_00_01}}), + .cfg_mcf_rx_check_eth_dst_mcast('{1{1'b1}}), + .cfg_mcf_rx_eth_dst_ucast('{1{48'd0}}), + .cfg_mcf_rx_check_eth_dst_ucast('{1{1'b0}}), + .cfg_mcf_rx_eth_src('{1{48'd0}}), + .cfg_mcf_rx_check_eth_src('{1{1'b0}}), + .cfg_mcf_rx_eth_type('{1{16'h8808}}), + .cfg_mcf_rx_opcode_lfc('{1{16'h0001}}), + .cfg_mcf_rx_check_opcode_lfc('{1{1'b1}}), + .cfg_mcf_rx_opcode_pfc('{1{16'h0101}}), + .cfg_mcf_rx_check_opcode_pfc('{1{1'b1}}), + .cfg_mcf_rx_forward('{1{1'b0}}), + .cfg_mcf_rx_enable('{1{1'b0}}), + .cfg_tx_lfc_eth_dst('{1{48'h01_80_C2_00_00_01}}), + .cfg_tx_lfc_eth_src('{1{48'h80_23_31_43_54_4C}}), + .cfg_tx_lfc_eth_type('{1{16'h8808}}), + .cfg_tx_lfc_opcode('{1{16'h0001}}), + .cfg_tx_lfc_en('{1{1'b0}}), + .cfg_tx_lfc_quanta('{1{16'hffff}}), + .cfg_tx_lfc_refresh('{1{16'h7fff}}), + .cfg_tx_pfc_eth_dst('{1{48'h01_80_C2_00_00_01}}), + .cfg_tx_pfc_eth_src('{1{48'h80_23_31_43_54_4C}}), + .cfg_tx_pfc_eth_type('{1{16'h8808}}), + .cfg_tx_pfc_opcode('{1{16'h0101}}), + .cfg_tx_pfc_en('{1{1'b0}}), + .cfg_tx_pfc_quanta('{1{'{8{16'hffff}}}}), + .cfg_tx_pfc_refresh('{1{'{8{16'h7fff}}}}), + .cfg_rx_lfc_opcode('{1{16'h0001}}), + .cfg_rx_lfc_en('{1{1'b0}}), + .cfg_rx_pfc_opcode('{1{16'h0101}}), + .cfg_rx_pfc_en('{1{1'b0}}) +); + +for (genvar n = 0; n < 1; n = n + 1) begin : sfp_ch + + taxi_axis_async_fifo #( + .DEPTH(16384), + .RAM_PIPELINE(2), + .FRAME_FIFO(1), + .USER_BAD_FRAME_VALUE(1'b1), + .USER_BAD_FRAME_MASK(1'b1), + .DROP_OVERSIZE_FRAME(1), + .DROP_BAD_FRAME(1), + .DROP_WHEN_FULL(1) + ) + ch_fifo ( + /* + * AXI4-Stream input (sink) + */ + .s_clk(sfp_rx_clk[n]), + .s_rst(sfp_rx_rst[n]), + .s_axis(axis_sfp_rx[n]), + + /* + * AXI4-Stream output (source) + */ + .m_clk(sfp_tx_clk[n]), + .m_rst(sfp_tx_rst[n]), + .m_axis(axis_sfp_tx[n]), + + /* + * Pause + */ + .s_pause_req(1'b0), + .s_pause_ack(), + .m_pause_req(1'b0), + .m_pause_ack(), + + /* + * Status + */ + .s_status_depth(), + .s_status_depth_commit(), + .s_status_overflow(), + .s_status_bad_frame(), + .s_status_good_frame(), + .m_status_depth(), + .m_status_depth_commit(), + .m_status_overflow(), + .m_status_bad_frame(), + .m_status_good_frame() + ); + +end + +endmodule + +`resetall diff --git a/src/eth/example/KC705/fpga_10g/rtl/si5324_i2c_init.sv b/src/eth/example/KC705/fpga_10g/rtl/si5324_i2c_init.sv new file mode 100644 index 0000000..2aeb806 --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/rtl/si5324_i2c_init.sv @@ -0,0 +1,567 @@ +// SPDX-License-Identifier: CERN-OHL-S-2.0 +/* + +Copyright (c) 2015-2025 FPGA Ninja, LLC + +Authors: +- Alex Forencich + +*/ + +`resetall +`timescale 1ns / 1ps +`default_nettype none + +/* + * I2C init + */ +module si5324_i2c_init # +( + parameter logic SIM_SPEEDUP = 1'b0 +) +( + input wire logic clk, + input wire logic rst, + + /* + * I2C master interface + */ + taxi_axis_if.src m_axis_cmd, + taxi_axis_if.src m_axis_tx, + + /* + * Status + */ + output wire logic busy, + + /* + * Configuration + */ + input wire logic start +); + +/* + +Generic module for I2C bus initialization. Good for use when multiple devices +on an I2C bus must be initialized on system start without intervention of a +general-purpose processor. + +Copy this file and change init_data and INIT_DATA_LEN as needed. + +This module can be used in two modes: simple device initialization, or multiple +device initialization. In multiple device mode, the same initialization sequence +can be performed on multiple different device addresses. + +To use single device mode, only use the start write to address and write data commands. +The module will generate the I2C commands in sequential order. Terminate the list +with a 0 entry. + +To use the multiple device mode, use the start data and start address block commands +to set up lists of initialization data and device addresses. The module enters +multiple device mode upon seeing a start data block command. The module stores the +offset of the start of the data block and then skips ahead until it reaches a start +address block command. The module will store the offset to the address block and +read the first address in the block. Then it will jump back to the data block +and execute it, substituting the stored address for each current address write +command. Upon reaching the start address block command, the module will read out the +next address and start again at the top of the data block. If the module encounters +a start data block command while looking for an address, then it will store a new data +offset and then look for a start address block command. Terminate the list with a 0 +entry. Normal address commands will operate normally inside a data block. + +Commands: + +00 0000000 : halt +00 0000001 : exit multiple device mode +00 0000011 : start write to current address +00 0001000 : start address block +00 0001001 : start data block +00 001dddd : delay 2**(16+d) cycles +00 1000001 : send I2C stop +01 aaaaaaa : start write to address +1 dddddddd : write 8-bit data + +Examples + +write 0x11223344 to register 0x0004 on device at 0x50 + +01 1010000 start write to 0x50 +1 00000000 write address 0x0004 +1 00000100 +1 00010001 write data 0x11223344 +1 00100010 +1 00110011 +1 01000100 +0 00000000 halt + +write 0x11223344 to register 0x0004 on devices at 0x50, 0x51, 0x52, and 0x53 + +00 0001001 start data block +00 0000011 start write to current address +1 00000000 write address 0x0004 +1 00000100 +1 00010001 write data 0x11223344 +1 00100010 +1 00110011 +1 01000100 +00 0001000 start address block +01 1010000 address 0x50 +01 1010001 address 0x51 +01 1010010 address 0x52 +01 1010011 address 0x53 +00 0000001 exit multi-dev mode +00 0000000 halt + +*/ + +// check configuration +if (m_axis_cmd.DATA_W < 12) + $fatal(0, "Command interface width must be at least 12 bits (instance %m)"); + +if (m_axis_tx.DATA_W != 8) + $fatal(0, "Data interface width must be 8 bits (instance %m)"); + +function [8:0] cmd_start(input [6:0] addr); + cmd_start = {2'b01, addr}; +endfunction + +function [8:0] cmd_wr(input [7:0] data); + cmd_wr = {1'b1, data}; +endfunction + +function [8:0] cmd_stop(); + cmd_stop = {2'b00, 7'b1000001}; +endfunction + +function [8:0] cmd_delay(input [3:0] d); + cmd_delay = {2'b00, 3'b001, d}; +endfunction + +function [8:0] cmd_halt(); + cmd_halt = 9'd0; +endfunction + +function [8:0] blk_start_data(); + blk_start_data = {2'b00, 7'b0001001}; +endfunction + +function [8:0] blk_start_addr(); + blk_start_addr = {2'b00, 7'b0001000}; +endfunction + +function [8:0] cmd_start_cur(); + cmd_start_cur = {2'b00, 7'b0000011}; +endfunction + +function [8:0] cmd_exit(); + cmd_exit = {2'b00, 7'b0000001}; +endfunction + +// init_data ROM +localparam INIT_DATA_LEN = 38; + +logic [8:0] init_data [INIT_DATA_LEN-1:0]; + +initial begin + // Initial delay + init_data[0] = cmd_delay(6); // delay 30 ms + // Select Si5324 + init_data[1] = cmd_start(7'h74); + init_data[2] = cmd_wr(8'h80); + init_data[3] = cmd_stop(); + // init Si5324 registers + init_data[4] = cmd_start(7'h68); // start write to 0x68 (Si5324) + init_data[5] = cmd_wr(8'd0); // register 0 + init_data[6] = cmd_wr(8'h54); // Reg 0: Free run, Clock off before ICAL, Bypass off (normal operation) + init_data[7] = cmd_wr(8'hE4); // Reg 1: CKIN2 second priority, CKIN1 first priority + init_data[8] = cmd_wr(8'h12); // Reg 2: BWSEL = 1 + init_data[9] = cmd_wr(8'h15); // Reg 3: CKIN1 selected, Digital Hold off, Output clocks disabled during ICAL + init_data[10] = cmd_wr(8'h92); // Reg 4: Automatic Revertive, HIST_DEL = 0x12 + init_data[11] = cmd_start(7'h68); // start write to 0x68 (Si5324) + init_data[12] = cmd_wr(8'd10); // register 10 + init_data[13] = cmd_wr(8'h08); // Reg 10: CKOUT2 disabled, CKOUT1 enabled + init_data[14] = cmd_wr(8'h40); // Reg 11: CKIN2 enabled, CKIN1 enabled + init_data[15] = cmd_start(7'h68); // start write to 0x68 (Si5324) + init_data[16] = cmd_wr(8'd25); // register 25 + init_data[17] = cmd_wr(8'hA0); // Reg 25: N1_HS = 9 + init_data[18] = cmd_start(7'h68); // start write to 0x68 (Si5324) + init_data[19] = cmd_wr(8'd31); // register 31 + init_data[20] = cmd_wr(8'h00); // Regs 31,32,33: NC1_LS = 4 + init_data[21] = cmd_wr(8'h00); + init_data[22] = cmd_wr(8'h03); + init_data[23] = cmd_start(7'h68); // start write to 0x68 (Si5324) + init_data[24] = cmd_wr(8'd40); // register 40 + init_data[25] = cmd_wr(8'hC2); // Regs 40,41,42: N2_HS = 10, N2_LS = 150000 + init_data[26] = cmd_wr(8'h49); + init_data[27] = cmd_wr(8'hEF); + init_data[28] = cmd_wr(8'h00); // Regs 43,44,45: N31 = 30475 + init_data[29] = cmd_wr(8'h77); + init_data[30] = cmd_wr(8'h0B); + init_data[31] = cmd_wr(8'h00); // Regs 46,47,48: N32 = 30475 + init_data[32] = cmd_wr(8'h77); + init_data[33] = cmd_wr(8'h0B); + init_data[34] = cmd_start(7'h68); // start write to 0x68 (Si5324) + init_data[35] = cmd_wr(8'd136); // register 136 + init_data[36] = cmd_wr(8'h40); // Reg 136: ICAL = 1 + init_data[37] = cmd_halt(); // stop +end + +localparam [2:0] + STATE_IDLE = 3'd0, + STATE_RUN = 3'd1, + STATE_TABLE_1 = 3'd2, + STATE_TABLE_2 = 3'd3, + STATE_TABLE_3 = 3'd4; + +logic [2:0] state_reg = STATE_IDLE, state_next; + +localparam AW = $clog2(INIT_DATA_LEN); + +logic [8:0] init_data_reg = '0; + +logic [AW-1:0] address_reg = '0, address_next; +logic [AW-1:0] address_ptr_reg = '0, address_ptr_next; +logic [AW-1:0] data_ptr_reg = '0, data_ptr_next; + +logic [6:0] cur_address_reg = '0, cur_address_next; + +logic [31:0] delay_counter_reg = '0, delay_counter_next; + +logic [6:0] m_axis_cmd_address_reg = '0, m_axis_cmd_address_next; +logic m_axis_cmd_start_reg = 1'b0, m_axis_cmd_start_next; +logic m_axis_cmd_write_reg = 1'b0, m_axis_cmd_write_next; +logic m_axis_cmd_stop_reg = 1'b0, m_axis_cmd_stop_next; +logic m_axis_cmd_valid_reg = 1'b0, m_axis_cmd_valid_next; + +logic [7:0] m_axis_tx_tdata_reg = '0, m_axis_tx_tdata_next; +logic m_axis_tx_tvalid_reg = 1'b0, m_axis_tx_tvalid_next; + +logic start_flag_reg = 1'b0, start_flag_next; + +logic busy_reg = 1'b0; + +assign m_axis_cmd.tdata[6:0] = m_axis_cmd_address_reg; +assign m_axis_cmd.tdata[7] = m_axis_cmd_start_reg; +assign m_axis_cmd.tdata[8] = 1'b0; // read +assign m_axis_cmd.tdata[9] = m_axis_cmd_write_reg; +assign m_axis_cmd.tdata[10] = 1'b0; // write multi +assign m_axis_cmd.tdata[11] = m_axis_cmd_stop_reg; +assign m_axis_cmd.tvalid = m_axis_cmd_valid_reg; +assign m_axis_cmd.tlast = 1'b1; +assign m_axis_cmd.tid = '0; +assign m_axis_cmd.tdest = '0; +assign m_axis_cmd.tuser = '0; + +assign m_axis_tx.tdata = m_axis_tx_tdata_reg; +assign m_axis_tx.tvalid = m_axis_tx_tvalid_reg; +assign m_axis_tx.tlast = 1'b1; +assign m_axis_tx.tid = '0; +assign m_axis_tx.tdest = '0; +assign m_axis_tx.tuser = '0; + +assign busy = busy_reg; + +always_comb begin + state_next = STATE_IDLE; + + address_next = address_reg; + address_ptr_next = address_ptr_reg; + data_ptr_next = data_ptr_reg; + + cur_address_next = cur_address_reg; + + delay_counter_next = delay_counter_reg; + + m_axis_cmd_address_next = m_axis_cmd_address_reg; + m_axis_cmd_start_next = m_axis_cmd_start_reg && !(m_axis_cmd.tvalid && m_axis_cmd.tready); + m_axis_cmd_write_next = m_axis_cmd_write_reg && !(m_axis_cmd.tvalid && m_axis_cmd.tready); + m_axis_cmd_stop_next = m_axis_cmd_stop_reg && !(m_axis_cmd.tvalid && m_axis_cmd.tready); + m_axis_cmd_valid_next = m_axis_cmd_valid_reg && !m_axis_cmd.tready; + + m_axis_tx_tdata_next = m_axis_tx_tdata_reg; + m_axis_tx_tvalid_next = m_axis_tx_tvalid_reg && !m_axis_tx.tready; + + start_flag_next = start_flag_reg; + + if (m_axis_cmd.tvalid || m_axis_tx.tvalid) begin + // wait for output registers to clear + state_next = state_reg; + end else if (delay_counter_reg != 0) begin + // delay + delay_counter_next = delay_counter_reg - 1; + state_next = state_reg; + end else begin + case (state_reg) + STATE_IDLE: begin + // wait for start signal + if (!start_flag_reg && start) begin + address_next = '0; + start_flag_next = 1'b1; + state_next = STATE_RUN; + end else begin + state_next = STATE_IDLE; + end + end + STATE_RUN: begin + // process commands + if (init_data_reg[8] == 1'b1) begin + // write data + m_axis_cmd_write_next = 1'b1; + m_axis_cmd_stop_next = 1'b0; + m_axis_cmd_valid_next = 1'b1; + + m_axis_tx_tdata_next = init_data_reg[7:0]; + m_axis_tx_tvalid_next = 1'b1; + + address_next = address_reg + 1; + + state_next = STATE_RUN; + end else if (init_data_reg[8:7] == 2'b01) begin + // write address + m_axis_cmd_address_next = init_data_reg[6:0]; + m_axis_cmd_start_next = 1'b1; + + address_next = address_reg + 1; + + state_next = STATE_RUN; + end else if (init_data_reg[8:4] == 5'b00001) begin + // delay + if (SIM_SPEEDUP) begin + delay_counter_next = 32'd1 << (init_data_reg[3:0]); + end else begin + delay_counter_next = 32'd1 << (init_data_reg[3:0]+16); + end + + address_next = address_reg + 1; + + state_next = STATE_RUN; + end else if (init_data_reg == 9'b001000001) begin + // send stop + m_axis_cmd_write_next = 1'b0; + m_axis_cmd_start_next = 1'b0; + m_axis_cmd_stop_next = 1'b1; + m_axis_cmd_valid_next = 1'b1; + + address_next = address_reg + 1; + + state_next = STATE_RUN; + end else if (init_data_reg == 9'b000001001) begin + // data table start + data_ptr_next = address_reg + 1; + address_next = address_reg + 1; + state_next = STATE_TABLE_1; + end else if (init_data_reg == 9'd0) begin + // stop + m_axis_cmd_start_next = 1'b0; + m_axis_cmd_write_next = 1'b0; + m_axis_cmd_stop_next = 1'b1; + m_axis_cmd_valid_next = 1'b1; + + state_next = STATE_IDLE; + end else begin + // invalid command, skip + address_next = address_reg + 1; + state_next = STATE_RUN; + end + end + STATE_TABLE_1: begin + // find address table start + if (init_data_reg == 9'b000001000) begin + // address table start + address_ptr_next = address_reg + 1; + address_next = address_reg + 1; + state_next = STATE_TABLE_2; + end else if (init_data_reg == 9'b000001001) begin + // data table start + data_ptr_next = address_reg + 1; + address_next = address_reg + 1; + state_next = STATE_TABLE_1; + end else if (init_data_reg == 1) begin + // exit mode + address_next = address_reg + 1; + state_next = STATE_RUN; + end else if (init_data_reg == 9'd0) begin + // stop + m_axis_cmd_start_next = 1'b0; + m_axis_cmd_write_next = 1'b0; + m_axis_cmd_stop_next = 1'b1; + m_axis_cmd_valid_next = 1'b1; + + state_next = STATE_IDLE; + end else begin + // invalid command, skip + address_next = address_reg + 1; + state_next = STATE_TABLE_1; + end + end + STATE_TABLE_2: begin + // find next address + if (init_data_reg[8:7] == 2'b01) begin + // write address command + // store address and move to data table + cur_address_next = init_data_reg[6:0]; + address_ptr_next = address_reg + 1; + address_next = data_ptr_reg; + state_next = STATE_TABLE_3; + end else if (init_data_reg == 9'b000001001) begin + // data table start + data_ptr_next = address_reg + 1; + address_next = address_reg + 1; + state_next = STATE_TABLE_1; + end else if (init_data_reg == 9'd1) begin + // exit mode + address_next = address_reg + 1; + state_next = STATE_RUN; + end else if (init_data_reg == 9'd0) begin + // stop + m_axis_cmd_start_next = 1'b0; + m_axis_cmd_write_next = 1'b0; + m_axis_cmd_stop_next = 1'b1; + m_axis_cmd_valid_next = 1'b1; + + state_next = STATE_IDLE; + end else begin + // invalid command, skip + address_next = address_reg + 1; + state_next = STATE_TABLE_2; + end + end + STATE_TABLE_3: begin + // process data table with selected address + if (init_data_reg[8] == 1'b1) begin + // write data + m_axis_cmd_write_next = 1'b1; + m_axis_cmd_stop_next = 1'b0; + m_axis_cmd_valid_next = 1'b1; + + m_axis_tx_tdata_next = init_data_reg[7:0]; + m_axis_tx_tvalid_next = 1'b1; + + address_next = address_reg + 1; + + state_next = STATE_TABLE_3; + end else if (init_data_reg[8:7] == 2'b01) begin + // write address + m_axis_cmd_address_next = init_data_reg[6:0]; + m_axis_cmd_start_next = 1'b1; + + address_next = address_reg + 1; + + state_next = STATE_TABLE_3; + end else if (init_data_reg == 9'b000000011) begin + // write current address + m_axis_cmd_address_next = cur_address_reg; + m_axis_cmd_start_next = 1'b1; + + address_next = address_reg + 1; + + state_next = STATE_TABLE_3; + end else if (init_data_reg[8:4] == 5'b00001) begin + // delay + if (SIM_SPEEDUP) begin + delay_counter_next = 32'd1 << (init_data_reg[3:0]); + end else begin + delay_counter_next = 32'd1 << (init_data_reg[3:0]+16); + end + + address_next = address_reg + 1; + + state_next = STATE_TABLE_3; + end else if (init_data_reg == 9'b001000001) begin + // send stop + m_axis_cmd_write_next = 1'b0; + m_axis_cmd_start_next = 1'b0; + m_axis_cmd_stop_next = 1'b1; + m_axis_cmd_valid_next = 1'b1; + + address_next = address_reg + 1; + + state_next = STATE_TABLE_3; + end else if (init_data_reg == 9'b000001001) begin + // data table start + data_ptr_next = address_reg + 1; + address_next = address_reg + 1; + state_next = STATE_TABLE_1; + end else if (init_data_reg == 9'b000001000) begin + // address table start + address_next = address_ptr_reg; + state_next = STATE_TABLE_2; + end else if (init_data_reg == 9'd1) begin + // exit mode + address_next = address_reg + 1; + state_next = STATE_RUN; + end else if (init_data_reg == 9'd0) begin + // stop + m_axis_cmd_start_next = 1'b0; + m_axis_cmd_write_next = 1'b0; + m_axis_cmd_stop_next = 1'b1; + m_axis_cmd_valid_next = 1'b1; + + state_next = STATE_IDLE; + end else begin + // invalid command, skip + address_next = address_reg + 1; + state_next = STATE_TABLE_3; + end + end + default: begin + // invalid state + state_next = STATE_IDLE; + end + endcase + end +end + +always_ff @(posedge clk) begin + state_reg <= state_next; + + // read init_data ROM + init_data_reg <= init_data[address_next]; + + address_reg <= address_next; + address_ptr_reg <= address_ptr_next; + data_ptr_reg <= data_ptr_next; + + cur_address_reg <= cur_address_next; + + delay_counter_reg <= delay_counter_next; + + m_axis_cmd_address_reg <= m_axis_cmd_address_next; + m_axis_cmd_start_reg <= m_axis_cmd_start_next; + m_axis_cmd_write_reg <= m_axis_cmd_write_next; + m_axis_cmd_stop_reg <= m_axis_cmd_stop_next; + m_axis_cmd_valid_reg <= m_axis_cmd_valid_next; + + m_axis_tx_tdata_reg <= m_axis_tx_tdata_next; + m_axis_tx_tvalid_reg <= m_axis_tx_tvalid_next; + + start_flag_reg <= start && start_flag_next; + + busy_reg <= (state_reg != STATE_IDLE); + + if (rst) begin + state_reg <= STATE_IDLE; + + init_data_reg <= '0; + + address_reg <= '0; + address_ptr_reg <= '0; + data_ptr_reg <= '0; + + cur_address_reg <= '0; + + delay_counter_reg <= '0; + + m_axis_cmd_valid_reg <= 1'b0; + + m_axis_tx_tvalid_reg <= 1'b0; + + start_flag_reg <= 1'b0; + + busy_reg <= 1'b0; + end +end + +endmodule + +`resetall diff --git a/src/eth/example/KC705/fpga_10g/tb/fpga_core/Makefile b/src/eth/example/KC705/fpga_10g/tb/fpga_core/Makefile new file mode 100644 index 0000000..c9c783e --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/tb/fpga_core/Makefile @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: MIT +# +# Copyright (c) 2020-2025 FPGA Ninja, LLC +# +# Authors: +# - Alex Forencich + +TOPLEVEL_LANG = verilog + +SIM ?= verilator +WAVES ?= 0 + +COCOTB_HDL_TIMEUNIT = 1ns +COCOTB_HDL_TIMEPRECISION = 1ps + +RTL_DIR = ../../rtl +LIB_DIR = ../../lib +TAXI_SRC_DIR = $(LIB_DIR)/taxi/src + +DUT = fpga_core +COCOTB_TEST_MODULES = test_$(DUT) +COCOTB_TOPLEVEL = $(DUT) +MODULE = $(COCOTB_TEST_MODULES) +TOPLEVEL = $(COCOTB_TOPLEVEL) +VERILOG_SOURCES += $(RTL_DIR)/$(DUT).sv +VERILOG_SOURCES += $(TAXI_SRC_DIR)/eth/rtl/us/taxi_eth_mac_25g_us.f +VERILOG_SOURCES += $(TAXI_SRC_DIR)/eth/rtl/taxi_eth_mac_1g_gmii_fifo.f +VERILOG_SOURCES += $(TAXI_SRC_DIR)/eth/rtl/taxi_eth_mac_1g_rgmii_fifo.f +VERILOG_SOURCES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_if_uart.f +VERILOG_SOURCES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_switch.sv +VERILOG_SOURCES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_mod_i2c_master.f +VERILOG_SOURCES += $(TAXI_SRC_DIR)/xfcp/rtl/taxi_xfcp_mod_stats.f +VERILOG_SOURCES += $(TAXI_SRC_DIR)/sync/rtl/taxi_sync_reset.sv +VERILOG_SOURCES += $(TAXI_SRC_DIR)/sync/rtl/taxi_sync_signal.sv +VERILOG_SOURCES += $(TAXI_SRC_DIR)/io/rtl/taxi_debounce_switch.sv + +# handle file list files +process_f_file = $(call process_f_files,$(addprefix $(dir $1),$(shell cat $1))) +process_f_files = $(foreach f,$1,$(if $(filter %.f,$f),$(call process_f_file,$f),$f)) +uniq_base = $(if $1,$(call uniq_base,$(foreach f,$1,$(if $(filter-out $(notdir $(lastword $1)),$(notdir $f)),$f,))) $(lastword $1)) +VERILOG_SOURCES := $(call uniq_base,$(call process_f_files,$(VERILOG_SOURCES))) + +# module parameters +export PARAM_SIM := "1'b1" +export PARAM_VENDOR := "\"XILINX\"" +export PARAM_FAMILY := "\"kintex7\"" +export PARAM_USE_CLK90 := "1'b1" +export PARAM_BASET_PHY_TYPE := "\"GMII\"" +export PARAM_SFP_INVERT := "1'b1" + +ifeq ($(SIM), icarus) + PLUSARGS += -fst + + COMPILE_ARGS += $(foreach v,$(filter PARAM_%,$(.VARIABLES)),-P $(COCOTB_TOPLEVEL).$(subst PARAM_,,$(v))=$($(v))) +else ifeq ($(SIM), verilator) + COMPILE_ARGS += $(foreach v,$(filter PARAM_%,$(.VARIABLES)),-G$(subst PARAM_,,$(v))=$($(v))) + + ifeq ($(WAVES), 1) + COMPILE_ARGS += --trace-fst + VERILATOR_TRACE = 1 + endif +endif + +include $(shell cocotb-config --makefiles)/Makefile.sim diff --git a/src/eth/example/KC705/fpga_10g/tb/fpga_core/baser.py b/src/eth/example/KC705/fpga_10g/tb/fpga_core/baser.py new file mode 120000 index 0000000..946b03b --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/tb/fpga_core/baser.py @@ -0,0 +1 @@ +../../lib/taxi/src/eth/tb/baser.py \ No newline at end of file diff --git a/src/eth/example/KC705/fpga_10g/tb/fpga_core/test_fpga_core.py b/src/eth/example/KC705/fpga_10g/tb/fpga_core/test_fpga_core.py new file mode 100644 index 0000000..988fc4b --- /dev/null +++ b/src/eth/example/KC705/fpga_10g/tb/fpga_core/test_fpga_core.py @@ -0,0 +1,309 @@ +#!/usr/bin/env python +# SPDX-License-Identifier: MIT +""" + +Copyright (c) 2020-2025 FPGA Ninja, LLC + +Authors: +- Alex Forencich + +""" + +import logging +import os +import sys + +import pytest +import cocotb_test.simulator + +import cocotb +from cocotb.log import SimLog +from cocotb.clock import Clock +from cocotb.triggers import RisingEdge, Timer, Combine + +from cocotbext.eth import XgmiiFrame +from cocotbext.eth import GmiiFrame, GmiiSource, GmiiSink, GmiiPhy, RgmiiPhy +from cocotbext.uart import UartSource, UartSink + +try: + from baser import BaseRSerdesSource, BaseRSerdesSink +except ImportError: + # attempt import from current directory + sys.path.insert(0, os.path.join(os.path.dirname(__file__))) + try: + from baser import BaseRSerdesSource, BaseRSerdesSink + finally: + del sys.path[0] + + +class TB: + def __init__(self, dut, speed=1000e6): + self.dut = dut + + self.log = SimLog("cocotb.tb") + self.log.setLevel(logging.DEBUG) + + if hasattr(dut, "baset_mac_gmii"): + self.baset_phy = GmiiPhy(dut.phy_gmii_txd, dut.phy_gmii_tx_er, dut.phy_gmii_tx_en, dut.phy_gmii_tx_clk, dut.phy_gmii_gtx_clk, + dut.phy_gmii_rxd, dut.phy_gmii_rx_er, dut.phy_gmii_rx_dv, dut.phy_gmii_rx_clk, speed=speed) + elif hasattr(dut, "baset_mac_rgmii"): + self.baset_phy = RgmiiPhy(dut.phy_rgmii_txd, dut.phy_rgmii_tx_ctl, dut.phy_rgmii_tx_clk, + dut.phy_rgmii_rxd, dut.phy_rgmii_rx_ctl, dut.phy_rgmii_rx_clk, speed=speed) + + self.sfp_sources = [] + self.sfp_sinks = [] + + cocotb.start_soon(Clock(dut.sfp_mgt_refclk_p, 6.4, units="ns").start()) + + for ch in dut.sfp_mac_inst.ch: + gt_inst = ch.ch_inst.gt.gt_inst + + if ch.ch_inst.CFG_LOW_LATENCY.value: + clk = 3.102 + gbx_cfg = (66, [64, 65]) + else: + clk = 3.2 + gbx_cfg = None + + cocotb.start_soon(Clock(gt_inst.tx_clk, clk, units="ns").start()) + cocotb.start_soon(Clock(gt_inst.rx_clk, clk, units="ns").start()) + + self.sfp_sources.append(BaseRSerdesSource( + data=gt_inst.serdes_rx_data, + data_valid=gt_inst.serdes_rx_data_valid, + hdr=gt_inst.serdes_rx_hdr, + hdr_valid=gt_inst.serdes_rx_hdr_valid, + clock=gt_inst.rx_clk, + slip=gt_inst.serdes_rx_bitslip, + reverse=True, + gbx_cfg=gbx_cfg + )) + self.sfp_sinks.append(BaseRSerdesSink( + data=gt_inst.serdes_tx_data, + data_valid=gt_inst.serdes_tx_data_valid, + hdr=gt_inst.serdes_tx_hdr, + hdr_valid=gt_inst.serdes_tx_hdr_valid, + gbx_sync=gt_inst.serdes_tx_gbx_sync, + clock=gt_inst.tx_clk, + reverse=True, + gbx_cfg=gbx_cfg + )) + + self.uart_source = UartSource(dut.uart_rxd, baud=921600, bits=8, stop_bits=1) + self.uart_sink = UartSink(dut.uart_txd, baud=921600, bits=8, stop_bits=1) + + dut.btnu.setimmediatevalue(0) + dut.btnl.setimmediatevalue(0) + dut.btnd.setimmediatevalue(0) + dut.btnr.setimmediatevalue(0) + dut.btnc.setimmediatevalue(0) + dut.sw.setimmediatevalue(0) + dut.uart_rts.setimmediatevalue(0) + + cocotb.start_soon(self._run_clk()) + + async def init(self): + self.dut.rst.setimmediatevalue(0) + + for k in range(10): + await RisingEdge(self.dut.clk) + + self.dut.rst.value = 1 + + for k in range(10): + await RisingEdge(self.dut.clk) + + self.dut.rst.value = 0 + + async def _run_clk(self): + t = Timer(2, 'ns') + while True: + self.dut.clk.value = 1 + await t + self.dut.clk90.value = 1 + await t + self.dut.clk.value = 0 + await t + self.dut.clk90.value = 0 + await t + + +async def mac_test(tb, source, sink): + tb.log.info("Test MAC") + + tb.log.info("Multiple small packets") + + count = 64 + + pkts = [bytearray([(x+k) % 256 for x in range(60)]) for k in range(count)] + + for p in pkts: + await source.send(GmiiFrame.from_payload(p)) + + for k in range(count): + rx_frame = await sink.recv() + + tb.log.info("RX frame: %s", rx_frame) + + assert rx_frame.get_payload() == pkts[k] + assert rx_frame.check_fcs() + assert rx_frame.error is None + + tb.log.info("Multiple large packets") + + count = 32 + + pkts = [bytearray([(x+k) % 256 for x in range(1514)]) for k in range(count)] + + for p in pkts: + await source.send(GmiiFrame.from_payload(p)) + + for k in range(count): + rx_frame = await sink.recv() + + tb.log.info("RX frame: %s", rx_frame) + + assert rx_frame.get_payload() == pkts[k] + assert rx_frame.check_fcs() + assert rx_frame.error is None + + tb.log.info("MAC test done") + + +async def mac_test_10g(tb, source, sink): + tb.log.info("Test MAC") + + tb.log.info("Wait for block lock") + for k in range(1200): + await RisingEdge(tb.dut.clk) + + tb.log.info("Multiple small packets") + + count = 64 + + pkts = [bytearray([(x+k) % 256 for x in range(60)]) for k in range(count)] + + for p in pkts: + await source.send(XgmiiFrame.from_payload(p)) + + for k in range(count): + rx_frame = await sink.recv() + + tb.log.info("RX frame: %s", rx_frame) + + assert rx_frame.get_payload() == pkts[k] + assert rx_frame.check_fcs() + + tb.log.info("Multiple large packets") + + count = 32 + + pkts = [bytearray([(x+k) % 256 for x in range(1514)]) for k in range(count)] + + for p in pkts: + await source.send(XgmiiFrame.from_payload(p)) + + for k in range(count): + rx_frame = await sink.recv() + + tb.log.info("RX frame: %s", rx_frame) + + assert rx_frame.get_payload() == pkts[k] + assert rx_frame.check_fcs() + + tb.log.info("MAC test done") + + +@cocotb.test() +async def run_test(dut): + + tb = TB(dut) + + await tb.init() + + tests = [] + + tb.log.info("Start BASE-T MAC loopback test") + + if hasattr(dut, "baset_mac_gmii"): + tests.append(cocotb.start_soon(mac_test(tb, tb.baset_phy.rx, tb.baset_phy.tx))) + elif hasattr(dut, "baset_mac_rgmii"): + tests.append(cocotb.start_soon(mac_test(tb, tb.baset_phy.rx, tb.baset_phy.tx))) + + for k in range(len(tb.sfp_sources)): + tb.log.info("Start SFP %d 10G MAC loopback test", k) + tests.append(cocotb.start_soon(mac_test_10g(tb, tb.sfp_sources[k], tb.sfp_sinks[k]))) + + await Combine(*tests) + + await RisingEdge(dut.clk) + await RisingEdge(dut.clk) + + +# cocotb-test + +tests_dir = os.path.abspath(os.path.dirname(__file__)) +rtl_dir = os.path.abspath(os.path.join(tests_dir, '..', '..', 'rtl')) +lib_dir = os.path.abspath(os.path.join(tests_dir, '..', '..', 'lib')) +taxi_src_dir = os.path.abspath(os.path.join(lib_dir, 'taxi', 'src')) + + +def process_f_files(files): + lst = {} + for f in files: + if f[-2:].lower() == '.f': + with open(f, 'r') as fp: + l = fp.read().split() + for f in process_f_files([os.path.join(os.path.dirname(f), x) for x in l]): + lst[os.path.basename(f)] = f + else: + lst[os.path.basename(f)] = f + return list(lst.values()) + + +@pytest.mark.parametrize("phy_type", ["GMII", "RGMII"]) +def test_fpga_core(request, phy_type): + dut = "fpga_core" + module = os.path.splitext(os.path.basename(__file__))[0] + toplevel = dut + + verilog_sources = [ + os.path.join(rtl_dir, f"{dut}.sv"), + os.path.join(taxi_src_dir, "eth", "rtl", "us", "taxi_eth_mac_25g_us.f"), + os.path.join(taxi_src_dir, "eth", "rtl", "taxi_eth_mac_1g_gmii_fifo.f"), + os.path.join(taxi_src_dir, "eth", "rtl", "taxi_eth_mac_1g_rgmii_fifo.f"), + os.path.join(taxi_src_dir, "xfcp", "rtl", "taxi_xfcp_if_uart.f"), + os.path.join(taxi_src_dir, "xfcp", "rtl", "taxi_xfcp_switch.sv"), + os.path.join(taxi_src_dir, "xfcp", "rtl", "taxi_xfcp_mod_i2c_master.f"), + os.path.join(taxi_src_dir, "xfcp", "rtl", "taxi_xfcp_mod_stats.f"), + os.path.join(taxi_src_dir, "sync", "rtl", "taxi_sync_reset.sv"), + os.path.join(taxi_src_dir, "sync", "rtl", "taxi_sync_signal.sv"), + os.path.join(taxi_src_dir, "io", "rtl", "taxi_debounce_switch.sv"), + ] + + verilog_sources = process_f_files(verilog_sources) + + parameters = {} + + parameters['SIM'] = "1'b1" + parameters['VENDOR'] = "\"XILINX\"" + parameters['FAMILY'] = "\"artix7\"" + parameters['USE_CLK90'] = "1'b1" + parameters['BASET_PHY_TYPE'] = f"\"{phy_type}\"" + parameters['SFP_INVERT'] = "1'b1" + + extra_env = {f'PARAM_{k}': str(v) for k, v in parameters.items()} + + sim_build = os.path.join(tests_dir, "sim_build", + request.node.name.replace('[', '-').replace(']', '')) + + cocotb_test.simulator.run( + simulator="verilator", + python_search=[tests_dir], + verilog_sources=verilog_sources, + toplevel=toplevel, + module=module, + parameters=parameters, + sim_build=sim_build, + extra_env=extra_env, + )