bslathi19/taxi
1
0
Fork 0
mirror of https://github.com/fpganinja/taxi.git synced 2025-12-09 08:58:40 -08:00
Code Issues Packages Projects Releases Wiki Activity

example/Nexus_K3P_S: Add example design for Cisco Nexus K35-S/K3P-S

Browse Source 
Signed-off-by: Alex Forencich <alex@alexforencich.com>
This commit is contained in:
Alex Forencich
2025-02-24 21:04:42 -08:00
parent 916355ca8a
commit 8ffbd43e08
15 changed files with 1832 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

34
example/Nexus_K3P_S/fpga/README.md Normal file
View File

@@ -0,0 +1,34 @@
# Taxi Example Design for Nexus K35-S/K3P-S (ExaNIC X10/X25)
## Introduction
This example design targets the Cisco Nexus K35-S/K3P-S (ExaNIC X10/X25) FPGA board.
The design places looped-back MACs on the SFP+ cages.
* SFP+ cages
* Looped-back 10GBASE-R or 25GBASE-R MAC via GTH or GTY transceiver
## Board details
* FPGA:
* K35-S/X10: xcku035-fbva676-2-e
* K3P-S/X235: xcku3p-ffvb676-2-e
* 25GBASE-R PHY: Soft PCS with GTH or GTY transceiver
## Licensing
* Toolchain
* Vivado Standard (enterprise license not required)
* IP
* No licensed vendor IP or 3rd party IP
## How to build
Run `make` in the appropriate `fpga*` subdirectory to build the bitstream. Ensure that the Xilinx Vivado toolchain components are in PATH.
## How to test
Run `make program` to program the board with Vivado.
To test the looped-back MAC, it is recommended to use a network tester like the Viavi T-BERD 5800 that supports basic layer 2 tests with a loopback. Do not connect the looped-back MAC to a network as the reflected packets may cause problems.

153
example/Nexus_K3P_S/fpga/common/vivado.mk Normal file
View File

@@ -0,0 +1,153 @@
# SPDX-License-Identifier: MIT
###################################################################
#
# Xilinx Vivado FPGA Makefile
#
# Copyright (c) 2016-2025 Alex Forencich
#
###################################################################
#
# Parameters:
# FPGA_TOP - Top module name
# FPGA_FAMILY - FPGA family (e.g. VirtexUltrascale)
# FPGA_DEVICE - FPGA device (e.g. xcvu095-ffva2104-2-e)
# SYN_FILES - list of source files
# INC_FILES - list of include files
# XDC_FILES - list of timing constraint files
# XCI_FILES - list of IP XCI files
# IP_TCL_FILES - list of IP TCL files (sourced during project creation)
# CONFIG_TCL_FILES - list of config TCL files (sourced before each build)
#
# Note: both SYN_FILES and INC_FILES support file list files. File list
# files are files with a .f extension that contain a list of additional
# files to include, one path relative to the .f file location per line.
# The .f files are processed recursively, and then the complete file list
# is de-duplicated, with later files in the list taking precedence.
#
# Example:
#
# FPGA_TOP = fpga
# FPGA_FAMILY = VirtexUltrascale
# FPGA_DEVICE = xcvu095-ffva2104-2-e
# SYN_FILES = rtl/fpga.v
# XDC_FILES = fpga.xdc
# XCI_FILES = ip/pcspma.xci
# include ../common/vivado.mk
#
###################################################################
# phony targets
.PHONY: fpga vivado tmpclean clean distclean
# prevent make from deleting intermediate files and reports
.PRECIOUS: %.xpr %.bit %.bin %.ltx %.xsa %.mcs %.prm
.SECONDARY:
CONFIG ?= config.mk
-include $(CONFIG)
FPGA_TOP ?= fpga
PROJECT ?= $(FPGA_TOP)
XDC_FILES ?= $(PROJECT).xdc
# handle file list files
process_f_file = $(call process_f_files,$(addprefix $(dir $1),$(shell cat $1)))
process_f_files = $(foreach f,$1,$(if $(filter %.f,$f),$(call process_f_file,$f),$f))
uniq_base = $(if $1,$(call uniq_base,$(foreach f,$1,$(if $(filter-out $(notdir $(lastword $1)),$(notdir $f)),$f,))) $(lastword $1))
SYN_FILES := $(call uniq_base,$(call process_f_files,$(SYN_FILES)))
INC_FILES := $(call uniq_base,$(call process_f_files,$(INC_FILES)))
###################################################################
# Main Targets
#
# all: build everything (fpga)
# fpga: build FPGA config
# vivado: open project in Vivado
# tmpclean: remove intermediate files
# clean: remove output files and project files
# distclean: remove archived output files
###################################################################
all: fpga
fpga: $(PROJECT).bit
vivado: $(PROJECT).xpr
vivado $(PROJECT).xpr
tmpclean::
-rm -rf *.log *.jou *.cache *.gen *.hbs *.hw *.ip_user_files *.runs *.xpr *.html *.xml *.sim *.srcs *.str .Xil defines.v
-rm -rf create_project.tcl update_config.tcl run_synth.tcl run_impl.tcl generate_bit.tcl
clean:: tmpclean
-rm -rf *.bit *.bin *.ltx *.xsa program.tcl generate_mcs.tcl *.mcs *.prm flash.tcl
-rm -rf *_utilization.rpt *_utilization_hierarchical.rpt
distclean:: clean
-rm -rf rev
###################################################################
# Target implementations
###################################################################
# Vivado project file
# create fresh project if Makefile or IP files have changed
create_project.tcl: Makefile $(XCI_FILES) $(IP_TCL_FILES)
rm -rf defines.v
touch defines.v
for x in $(DEFS); do echo '`define' $$x >> defines.v; done
echo "create_project -force -part $(FPGA_PART) $(PROJECT)" > $@
echo "add_files -fileset sources_1 defines.v $(SYN_FILES)" >> $@
echo "set_property top $(FPGA_TOP) [current_fileset]" >> $@
echo "add_files -fileset constrs_1 $(XDC_FILES)" >> $@
for x in $(XCI_FILES); do echo "import_ip $$x" >> $@; done
for x in $(IP_TCL_FILES); do echo "source $$x" >> $@; done
for x in $(CONFIG_TCL_FILES); do echo "source $$x" >> $@; done
# source config TCL scripts if any source file has changed
update_config.tcl: $(CONFIG_TCL_FILES) $(SYN_FILES) $(INC_FILES) $(XDC_FILES)
echo "open_project -quiet $(PROJECT).xpr" > $@
for x in $(CONFIG_TCL_FILES); do echo "source $$x" >> $@; done
$(PROJECT).xpr: create_project.tcl update_config.tcl
vivado -nojournal -nolog -mode batch $(foreach x,$?,-source $x)
# synthesis run
$(PROJECT).runs/synth_1/$(PROJECT).dcp: create_project.tcl update_config.tcl $(SYN_FILES) $(INC_FILES) $(XDC_FILES) | $(PROJECT).xpr
echo "open_project $(PROJECT).xpr" > run_synth.tcl
echo "reset_run synth_1" >> run_synth.tcl
echo "launch_runs -jobs 4 synth_1" >> run_synth.tcl
echo "wait_on_run synth_1" >> run_synth.tcl
vivado -nojournal -nolog -mode batch -source run_synth.tcl
# implementation run
$(PROJECT).runs/impl_1/$(PROJECT)_routed.dcp: $(PROJECT).runs/synth_1/$(PROJECT).dcp
echo "open_project $(PROJECT).xpr" > run_impl.tcl
echo "reset_run impl_1" >> run_impl.tcl
echo "launch_runs -jobs 4 impl_1" >> run_impl.tcl
echo "wait_on_run impl_1" >> run_impl.tcl
echo "open_run impl_1" >> run_impl.tcl
echo "report_utilization -file $(PROJECT)_utilization.rpt" >> run_impl.tcl
echo "report_utilization -hierarchical -file $(PROJECT)_utilization_hierarchical.rpt" >> run_impl.tcl
vivado -nojournal -nolog -mode batch -source run_impl.tcl
# output files (including potentially bit, bin, ltx, and xsa)
$(PROJECT).bit $(PROJECT).bin $(PROJECT).ltx $(PROJECT).xsa: $(PROJECT).runs/impl_1/$(PROJECT)_routed.dcp
echo "open_project $(PROJECT).xpr" > generate_bit.tcl
echo "open_run impl_1" >> generate_bit.tcl
echo "write_bitstream -force -bin_file $(PROJECT).runs/impl_1/$(PROJECT).bit" >> generate_bit.tcl
echo "write_debug_probes -force $(PROJECT).runs/impl_1/$(PROJECT).ltx" >> generate_bit.tcl
echo "write_hw_platform -fixed -force -include_bit $(PROJECT).xsa" >> generate_bit.tcl
vivado -nojournal -nolog -mode batch -source generate_bit.tcl
ln -f -s $(PROJECT).runs/impl_1/$(PROJECT).bit .
ln -f -s $(PROJECT).runs/impl_1/$(PROJECT).bin .
if [ -e $(PROJECT).runs/impl_1/$(PROJECT).ltx ]; then ln -f -s $(PROJECT).runs/impl_1/$(PROJECT).ltx .; fi
mkdir -p rev
COUNT=100; \
while [ -e rev/$(PROJECT)_rev$$COUNT.bit ]; \
do COUNT=$$((COUNT+1)); done; \
cp -pv $(PROJECT).runs/impl_1/$(PROJECT).bit rev/$(PROJECT)_rev$$COUNT.bit; \
cp -pv $(PROJECT).runs/impl_1/$(PROJECT).bin rev/$(PROJECT)_rev$$COUNT.bin; \
if [ -e $(PROJECT).runs/impl_1/$(PROJECT).ltx ]; then cp -pv $(PROJECT).runs/impl_1/$(PROJECT).ltx rev/$(PROJECT)_rev$$COUNT.ltx; fi; \
if [ -e $(PROJECT).xsa ]; then cp -pv $(PROJECT).xsa rev/$(PROJECT)_rev$$COUNT.xsa; fi

83
example/Nexus_K3P_S/fpga/fpga_K35/Makefile Normal file
View File

@@ -0,0 +1,83 @@
# SPDX-License-Identifier: MIT
#
# Copyright (c) 2025 FPGA Ninja, LLC
#
# Authors:
# - Alex Forencich
#
# FPGA settings
FPGA_PART = xcku035-fbva676-2-e
FPGA_TOP = fpga
FPGA_ARCH = kintexu
# Files for synthesis
SYN_FILES = ../rtl/fpga_k35.sv
SYN_FILES += ../rtl/fpga_core.sv
SYN_FILES += ../lib/taxi/rtl/eth/us/taxi_eth_mac_25g_us.f
SYN_FILES += ../lib/taxi/rtl/axis/taxi_axis_async_fifo.f
SYN_FILES += ../lib/taxi/rtl/sync/taxi_sync_reset.sv
SYN_FILES += ../lib/taxi/rtl/sync/taxi_sync_signal.sv
# XDC files
XDC_FILES = ../fpga_k35.xdc
XDC_FILES += ../lib/taxi/syn/vivado/taxi_eth_mac_fifo.tcl
XDC_FILES += ../lib/taxi/syn/vivado/taxi_axis_async_fifo.tcl
XDC_FILES += ../lib/taxi/syn/vivado/taxi_sync_reset.tcl
# IP
IP_TCL_FILES = ../lib/taxi/rtl/eth/us/taxi_eth_mac_25g_us_gth_10g_161.tcl
# Configuration
# CONFIG_TCL_FILES = ./config.tcl
include ../common/vivado.mk
program: $(PROJECT).bit
echo "open_hw_manager" > program.tcl
echo "connect_hw_server" >> program.tcl
echo "open_hw_target" >> program.tcl
echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
echo "program_hw_devices [current_hw_device]" >> program.tcl
echo "exit" >> program.tcl
vivado -nojournal -nolog -mode batch -source program.tcl
$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
echo "write_cfgmem -force -format mcs -size 32 -interface BPIx16 -loadbit {up 0x00800000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
echo "exit" >> generate_mcs.tcl
vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
mkdir -p rev
COUNT=100; \
while [ -e rev/$*_rev$$COUNT.bit ]; \
do COUNT=$$((COUNT+1)); done; \
COUNT=$$((COUNT-1)); \
for x in .mcs .prm; \
do cp $*$$x rev/$*_rev$$COUNT$$x; \
echo "Output: rev/$*_rev$$COUNT$$x"; done;
flash: $(PROJECT).mcs $(PROJECT).prm
echo "open_hw_manager" > flash.tcl
echo "connect_hw_server" >> flash.tcl
echo "open_hw_target" >> flash.tcl
echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {28f256p30t-bpi-x16}] 0]" >> flash.tcl
echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
echo "set_property PROGRAM.FILES [list \"$(PROJECT).mcs\"] [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.PRM_FILES [list \"$(PROJECT).prm\"] [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.BPI_RS_PINS {24:23} [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
echo "program_hw_devices [current_hw_device]" >> flash.tcl
echo "refresh_hw_device [current_hw_device]" >> flash.tcl
echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
echo "boot_hw_device [current_hw_device]" >> flash.tcl
echo "exit" >> flash.tcl
vivado -nojournal -nolog -mode batch -source flash.tcl

83
example/Nexus_K3P_S/fpga/fpga_K3P/Makefile Normal file
View File

@@ -0,0 +1,83 @@
# SPDX-License-Identifier: MIT
#
# Copyright (c) 2025 FPGA Ninja, LLC
#
# Authors:
# - Alex Forencich
#
# FPGA settings
FPGA_PART = xcku3p-ffvb676-2-e
FPGA_TOP = fpga
FPGA_ARCH = kintexuplus
# Files for synthesis
SYN_FILES = ../rtl/fpga_k3p.sv
SYN_FILES += ../rtl/fpga_core.sv
SYN_FILES += ../lib/taxi/rtl/eth/us/taxi_eth_mac_25g_us.f
SYN_FILES += ../lib/taxi/rtl/axis/taxi_axis_async_fifo.f
SYN_FILES += ../lib/taxi/rtl/sync/taxi_sync_reset.sv
SYN_FILES += ../lib/taxi/rtl/sync/taxi_sync_signal.sv
# XDC files
XDC_FILES = ../fpga_k3p.xdc
XDC_FILES += ../lib/taxi/syn/vivado/taxi_eth_mac_fifo.tcl
XDC_FILES += ../lib/taxi/syn/vivado/taxi_axis_async_fifo.tcl
XDC_FILES += ../lib/taxi/syn/vivado/taxi_sync_reset.tcl
# IP
IP_TCL_FILES = ../lib/taxi/rtl/eth/us/taxi_eth_mac_25g_us_gty_25g_161.tcl
# Configuration
# CONFIG_TCL_FILES = ./config.tcl
include ../common/vivado.mk
program: $(PROJECT).bit
echo "open_hw_manager" > program.tcl
echo "connect_hw_server" >> program.tcl
echo "open_hw_target" >> program.tcl
echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
echo "program_hw_devices [current_hw_device]" >> program.tcl
echo "exit" >> program.tcl
vivado -nojournal -nolog -mode batch -source program.tcl
$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
echo "write_cfgmem -force -format mcs -size 32 -interface BPIx16 -loadbit {up 0x00800000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
echo "exit" >> generate_mcs.tcl
vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
mkdir -p rev
COUNT=100; \
while [ -e rev/$*_rev$$COUNT.bit ]; \
do COUNT=$$((COUNT+1)); done; \
COUNT=$$((COUNT-1)); \
for x in .mcs .prm; \
do cp $*$$x rev/$*_rev$$COUNT$$x; \
echo "Output: rev/$*_rev$$COUNT$$x"; done;
flash: $(PROJECT).mcs $(PROJECT).prm
echo "open_hw_manager" > flash.tcl
echo "connect_hw_server" >> flash.tcl
echo "open_hw_target" >> flash.tcl
echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {s29gl256p-bpi-x16}] 0]" >> flash.tcl
echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
echo "set_property PROGRAM.FILES [list \"$(PROJECT).mcs\"] [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.PRM_FILES [list \"$(PROJECT).prm\"] [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.BPI_RS_PINS {24:23} [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
echo "program_hw_devices [current_hw_device]" >> flash.tcl
echo "refresh_hw_device [current_hw_device]" >> flash.tcl
echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
echo "boot_hw_device [current_hw_device]" >> flash.tcl
echo "exit" >> flash.tcl
vivado -nojournal -nolog -mode batch -source flash.tcl

84
example/Nexus_K3P_S/fpga/fpga_K3P_10g/Makefile Normal file
View File

@@ -0,0 +1,84 @@
# SPDX-License-Identifier: MIT
#
# Copyright (c) 2025 FPGA Ninja, LLC
#
# Authors:
# - Alex Forencich
#
# FPGA settings
FPGA_PART = xcku3p-ffvb676-2-e
FPGA_TOP = fpga
FPGA_ARCH = kintexuplus
# Files for synthesis
SYN_FILES = ../rtl/fpga_k3p.sv
SYN_FILES += ../rtl/fpga_core.sv
SYN_FILES += ../lib/taxi/rtl/eth/us/taxi_eth_mac_25g_us.f
SYN_FILES += ../lib/taxi/rtl/axis/taxi_axis_async_fifo.f
SYN_FILES += ../lib/taxi/rtl/sync/taxi_sync_reset.sv
SYN_FILES += ../lib/taxi/rtl/sync/taxi_sync_signal.sv
# XDC files
XDC_FILES = ../fpga_k3p.xdc
XDC_FILES += ../lib/taxi/syn/vivado/taxi_eth_mac_fifo.tcl
XDC_FILES += ../lib/taxi/syn/vivado/taxi_axis_async_fifo.tcl
XDC_FILES += ../lib/taxi/syn/vivado/taxi_sync_reset.tcl
# IP
IP_TCL_FILES = ../lib/taxi/rtl/eth/us/taxi_eth_mac_25g_us_gty_10g_161.tcl
# Configuration
# CONFIG_TCL_FILES = ./config.tcl
include ../common/vivado.mk
program: $(PROJECT).bit
echo "open_hw_manager" > program.tcl
echo "connect_hw_server" >> program.tcl
echo "open_hw_target" >> program.tcl
echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
echo "program_hw_devices [current_hw_device]" >> program.tcl
echo "exit" >> program.tcl
vivado -nojournal -nolog -mode batch -source program.tcl
$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
echo "write_cfgmem -force -format mcs -size 32 -interface BPIx16 -loadbit {up 0x00800000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
echo "exit" >> generate_mcs.tcl
vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
mkdir -p rev
COUNT=100; \
while [ -e rev/$*_rev$$COUNT.bit ]; \
do COUNT=$$((COUNT+1)); done; \
COUNT=$$((COUNT-1)); \
for x in .mcs .prm; \
do cp $*$$x rev/$*_rev$$COUNT$$x; \
echo "Output: rev/$*_rev$$COUNT$$x"; done;
flash: $(PROJECT).mcs $(PROJECT).prm
echo "open_hw_manager" > flash.tcl
echo "connect_hw_server" >> flash.tcl
echo "open_hw_target" >> flash.tcl
echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {s29gl256p-bpi-x16}] 0]" >> flash.tcl
echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
echo "set_property PROGRAM.FILES [list \"$(PROJECT).mcs\"] [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.PRM_FILES [list \"$(PROJECT).prm\"] [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.BPI_RS_PINS {24:23} [current_hw_cfgmem]" >> flash.tcl
echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
echo "program_hw_devices [current_hw_device]" >> flash.tcl
echo "refresh_hw_device [current_hw_device]" >> flash.tcl
echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
echo "boot_hw_device [current_hw_device]" >> flash.tcl
echo "exit" >> flash.tcl
vivado -nojournal -nolog -mode batch -source flash.tcl

192
example/Nexus_K3P_S/fpga/fpga_k35.xdc Normal file
View File

@@ -0,0 +1,192 @@
# SPDX-License-Identifier: MIT
#
# Copyright (c) 2025 FPGA Ninja, LLC
#
# Authors:
# - Alex Forencich
#
# XDC constraints for the Cisco Nexus K35-S / ExaNIC X10
# part: xcku035-fbva676-2-e
# General configuration
set_property CFGBVS GND [current_design]
set_property CONFIG_VOLTAGE 1.8 [current_design]
set_property BITSTREAM.GENERAL.COMPRESS true [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN Pullup [current_design]
set_property BITSTREAM.CONFIG.CONFIGRATE 50 [current_design]
set_property BITSTREAM.CONFIG.BPI_SYNC_MODE Type2 [current_design]
set_property CONFIG_MODE BPI16 [current_design]
set_property BITSTREAM.CONFIG.OVERTEMPSHUTDOWN Enable [current_design]
# 100 MHz system clock
set_property -dict {LOC D18 IOSTANDARD LVDS} [get_ports {clk_100mhz_p}]
set_property -dict {LOC C18 IOSTANDARD LVDS} [get_ports {clk_100mhz_n}]
create_clock -period 10 -name clk_100mhz [get_ports {clk_100mhz_p}]
# LEDs
set_property -dict {LOC A25 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sfp_led[0][0]}]
set_property -dict {LOC A24 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sfp_led[0][1]}]
set_property -dict {LOC E23 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sfp_led[1][0]}]
set_property -dict {LOC D26 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sfp_led[1][1]}]
set_property -dict {LOC C23 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sma_led[0]}]
set_property -dict {LOC D23 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sma_led[1]}]
set_false_path -to [get_ports {sfp_led[*][*] sma_led[*]}]
set_output_delay 0 [get_ports {sfp_led[*][*] sma_led[*]}]
# GPIO
#set_property -dict {LOC W26 IOSTANDARD LVCMOS18} [get_ports {gpio[0]}]
#set_property -dict {LOC Y26 IOSTANDARD LVCMOS18} [get_ports {gpio[1]}]
#set_property -dict {LOC AB26 IOSTANDARD LVCMOS18} [get_ports {gpio[2]}]
#set_property -dict {LOC AC26 IOSTANDARD LVCMOS18} [get_ports {gpio[3]}]
# SMA
#set_property -dict {LOC B17 IOSTANDARD LVCMOS18} [get_ports {sma_in}]
#set_property -dict {LOC B16 IOSTANDARD LVCMOS18 SLEW FAST DRIVE 12} [get_ports {sma_out}]
#set_property -dict {LOC B19 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sma_out_en}]
#set_property -dict {LOC C16 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sma_term_en}]
#set_false_path -to [get_ports {sma_out sma_term sma_term_en}]
#set_output_delay 0 [get_ports {sma_out sma_term sma_term_en}]
#set_false_path -from [get_ports {sma_in}]
#set_input_delay 0 [get_ports {sma_in}]
# SFP+ Interfaces
set_property -dict {LOC D2 } [get_ports {sfp_rx_p[0]}] ;# MGTHRXP0_227 GTHE3_CHANNEL_X0Y12 / GTHE3_COMMON_X0Y3
set_property -dict {LOC D1 } [get_ports {sfp_rx_n[0]}] ;# MGTHRXN0_227 GTHE3_CHANNEL_X0Y12 / GTHE3_COMMON_X0Y3
set_property -dict {LOC E4 } [get_ports {sfp_tx_p[0]}] ;# MGTHTXP0_227 GTHE3_CHANNEL_X0Y12 / GTHE3_COMMON_X0Y3
set_property -dict {LOC E3 } [get_ports {sfp_tx_n[0]}] ;# MGTHTXN0_227 GTHE3_CHANNEL_X0Y12 / GTHE3_COMMON_X0Y3
set_property -dict {LOC C4 } [get_ports {sfp_rx_p[1]}] ;# MGTHRXP1_227 GTHE3_CHANNEL_X0Y13 / GTHE3_COMMON_X0Y3
set_property -dict {LOC C3 } [get_ports {sfp_rx_n[1]}] ;# MGTHRXN1_227 GTHE3_CHANNEL_X0Y13 / GTHE3_COMMON_X0Y3
set_property -dict {LOC D6 } [get_ports {sfp_tx_p[1]}] ;# MGTHTXP1_227 GTHE3_CHANNEL_X0Y13 / GTHE3_COMMON_X0Y3
set_property -dict {LOC D5 } [get_ports {sfp_tx_n[1]}] ;# MGTHTXN1_227 GTHE3_CHANNEL_X0Y13 / GTHE3_COMMON_X0Y3
set_property -dict {LOC H6 } [get_ports {sfp_mgt_refclk_p}] ;# MGTREFCLK0P_227 from X2
set_property -dict {LOC H5 } [get_ports {sfp_mgt_refclk_n}] ;# MGTREFCLK0N_227 from X2
set_property -dict {LOC AA12 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sfp_tx_disable[0]}]
set_property -dict {LOC W14 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sfp_tx_disable[1]}]
set_property -dict {LOC C24 IOSTANDARD LVCMOS18 PULLUP true} [get_ports {sfp_npres[0]}]
set_property -dict {LOC D24 IOSTANDARD LVCMOS18 PULLUP true} [get_ports {sfp_npres[1]}]
set_property -dict {LOC W13 IOSTANDARD LVCMOS18 PULLUP true} [get_ports {sfp_los[0]}]
set_property -dict {LOC AB12 IOSTANDARD LVCMOS18 PULLUP true} [get_ports {sfp_los[1]}]
set_property -dict {LOC B25 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sfp_rs[0]}]
set_property -dict {LOC D25 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sfp_rs[1]}]
#set_property -dict {LOC W11 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12 PULLUP true} [get_ports {sfp_i2c_scl}]
#set_property -dict {LOC Y11 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12 PULLUP true} [get_ports {sfp_i2c_sda[0]}]
#set_property -dict {LOC Y13 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12 PULLUP true} [get_ports {sfp_i2c_sda[1]}]
# 161.1328125 MHz MGT reference clock
create_clock -period 6.206 -name sfp_mgt_refclk [get_ports {sfp_mgt_refclk_p}]
set_false_path -to [get_ports {sfp_tx_disable[*] sfp_rs[*]}]
set_output_delay 0 [get_ports {sfp_tx_disable[*] sfp_rs[*]}]
set_false_path -from [get_ports {sfp_npres[*] sfp_los[*]}]
set_input_delay 0 [get_ports {sfp_npres[*] sfp_los[*]}]
#set_false_path -to [get_ports {sfp_1_i2c_sda sfp_2_i2c_sda sfp_i2c_scl}]
#set_output_delay 0 [get_ports {sfp_1_i2c_sda sfp_2_i2c_sda sfp_i2c_scl}]
#set_false_path -from [get_ports {sfp_1_i2c_sda sfp_2_i2c_sda sfp_i2c_scl}]
#set_input_delay 0 [get_ports {sfp_1_i2c_sda sfp_2_i2c_sda sfp_i2c_scl}]
# I2C interface
#set_property -dict {LOC B26 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12 PULLUP true} [get_ports {eeprom_i2c_scl}]
#set_property -dict {LOC C26 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12 PULLUP true} [get_ports {eeprom_i2c_sda}]
#set_false_path -to [get_ports {eeprom_i2c_sda eeprom_i2c_scl}]
#set_output_delay 0 [get_ports {eeprom_i2c_sda eeprom_i2c_scl}]
#set_false_path -from [get_ports {eeprom_i2c_sda eeprom_i2c_scl}]
#set_input_delay 0 [get_ports {eeprom_i2c_sda eeprom_i2c_scl}]
# PCIe Interface
#set_property -dict {LOC P2 } [get_ports {pcie_rx_p[0]}] ;# MGTHRXP3_225 GTHE3_CHANNEL_X0Y7 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC P1 } [get_ports {pcie_rx_n[0]}] ;# MGTHRXN3_225 GTHE3_CHANNEL_X0Y7 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC R4 } [get_ports {pcie_tx_p[0]}] ;# MGTHTXP3_225 GTHE3_CHANNEL_X0Y7 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC R3 } [get_ports {pcie_tx_n[0]}] ;# MGTHTXN3_225 GTHE3_CHANNEL_X0Y7 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC T2 } [get_ports {pcie_rx_p[1]}] ;# MGTHRXP2_225 GTHE3_CHANNEL_X0Y6 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC T1 } [get_ports {pcie_rx_n[1]}] ;# MGTHRXN2_225 GTHE3_CHANNEL_X0Y6 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC U4 } [get_ports {pcie_tx_p[1]}] ;# MGTHTXP2_225 GTHE3_CHANNEL_X0Y6 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC U3 } [get_ports {pcie_tx_n[1]}] ;# MGTHTXN2_225 GTHE3_CHANNEL_X0Y6 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC V2 } [get_ports {pcie_rx_p[2]}] ;# MGTHRXP1_225 GTHE3_CHANNEL_X0Y5 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC V1 } [get_ports {pcie_rx_n[2]}] ;# MGTHRXN1_225 GTHE3_CHANNEL_X0Y5 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC W4 } [get_ports {pcie_tx_p[2]}] ;# MGTHTXP1_225 GTHE3_CHANNEL_X0Y5 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC W3 } [get_ports {pcie_tx_n[2]}] ;# MGTHTXN1_225 GTHE3_CHANNEL_X0Y5 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC Y2 } [get_ports {pcie_rx_p[3]}] ;# MGTHRXP0_225 GTHE3_CHANNEL_X0Y4 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC Y1 } [get_ports {pcie_rx_n[3]}] ;# MGTHRXN0_225 GTHE3_CHANNEL_X0Y4 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC AA4 } [get_ports {pcie_tx_p[3]}] ;# MGTHTXP0_225 GTHE3_CHANNEL_X0Y4 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC AA3 } [get_ports {pcie_tx_n[3]}] ;# MGTHTXN0_225 GTHE3_CHANNEL_X0Y4 / GTHE3_COMMON_X0Y1
#set_property -dict {LOC AB2 } [get_ports {pcie_rx_p[4]}] ;# MGTHRXP3_224 GTHE3_CHANNEL_X0Y3 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AB1 } [get_ports {pcie_rx_n[4]}] ;# MGTHRXN3_224 GTHE3_CHANNEL_X0Y3 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AB6 } [get_ports {pcie_tx_p[4]}] ;# MGTHTXP3_224 GTHE3_CHANNEL_X0Y3 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AB5 } [get_ports {pcie_tx_n[4]}] ;# MGTHTXN3_224 GTHE3_CHANNEL_X0Y3 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AD2 } [get_ports {pcie_rx_p[5]}] ;# MGTHRXP2_224 GTHE3_CHANNEL_X0Y2 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AD1 } [get_ports {pcie_rx_n[5]}] ;# MGTHRXN2_224 GTHE3_CHANNEL_X0Y2 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AC4 } [get_ports {pcie_tx_p[5]}] ;# MGTHTXP2_224 GTHE3_CHANNEL_X0Y2 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AC3 } [get_ports {pcie_tx_n[5]}] ;# MGTHTXN2_224 GTHE3_CHANNEL_X0Y2 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AE4 } [get_ports {pcie_rx_p[6]}] ;# MGTHRXP1_224 GTHE3_CHANNEL_X0Y1 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AE3 } [get_ports {pcie_rx_n[6]}] ;# MGTHRXN1_224 GTHE3_CHANNEL_X0Y1 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AD6 } [get_ports {pcie_tx_p[6]}] ;# MGTHTXP1_224 GTHE3_CHANNEL_X0Y1 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AD5 } [get_ports {pcie_tx_n[6]}] ;# MGTHTXN1_224 GTHE3_CHANNEL_X0Y1 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AF2 } [get_ports {pcie_rx_p[7]}] ;# MGTHRXP0_224 GTHE3_CHANNEL_X0Y0 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AF1 } [get_ports {pcie_rx_n[7]}] ;# MGTHRXN0_224 GTHE3_CHANNEL_X0Y0 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AF6 } [get_ports {pcie_tx_p[7]}] ;# MGTHTXP0_224 GTHE3_CHANNEL_X0Y0 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC AF5 } [get_ports {pcie_tx_n[7]}] ;# MGTHTXN0_224 GTHE3_CHANNEL_X0Y0 / GTHE3_COMMON_X0Y0
#set_property -dict {LOC T6 } [get_ports pcie_mgt_refclk_p] ;# MGTREFCLK0P_225
#set_property -dict {LOC T5 } [get_ports pcie_mgt_refclk_n] ;# MGTREFCLK0N_225
#set_property -dict {LOC AC22 IOSTANDARD LVCMOS18 PULLUP true} [get_ports pcie_reset_n]
# 100 MHz MGT reference clock
#create_clock -period 10 -name pcie_mgt_refclk [get_ports pcie_mgt_refclk_p]
#set_false_path -from [get_ports {pcie_reset_n}]
#set_input_delay 0 [get_ports {pcie_reset_n}]
# BPI flash
#set_property -dict {LOC AE10 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[0]}]
#set_property -dict {LOC AC8 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[1]}]
#set_property -dict {LOC AD10 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[2]}]
#set_property -dict {LOC AD9 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[3]}]
#set_property -dict {LOC AC11 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[4]}]
#set_property -dict {LOC AF10 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[5]}]
#set_property -dict {LOC AF14 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[6]}]
#set_property -dict {LOC AE12 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[7]}]
#set_property -dict {LOC AD14 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[8]}]
#set_property -dict {LOC AF13 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[9]}]
#set_property -dict {LOC AE13 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[10]}]
#set_property -dict {LOC AD8 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[11]}]
#set_property -dict {LOC AC13 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[12]}]
#set_property -dict {LOC AD13 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[13]}]
#set_property -dict {LOC AA14 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[14]}]
#set_property -dict {LOC AB15 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_dq[15]}]
#set_property -dict {LOC AD11 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[0]}]
#set_property -dict {LOC AE11 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[1]}]
#set_property -dict {LOC AF12 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[2]}]
#set_property -dict {LOC AB11 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[3]}]
#set_property -dict {LOC AB9 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[4]}]
#set_property -dict {LOC AB14 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[5]}]
#set_property -dict {LOC AA10 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[6]}]
#set_property -dict {LOC AA9 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[7]}]
#set_property -dict {LOC W10 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[8]}]
#set_property -dict {LOC AA13 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[9]}]
#set_property -dict {LOC Y15 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[10]}]
#set_property -dict {LOC AC12 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[11]}]
#set_property -dict {LOC V12 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[12]}]
#set_property -dict {LOC V11 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[13]}]
#set_property -dict {LOC Y12 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[14]}]
#set_property -dict {LOC W9 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[15]}]
#set_property -dict {LOC Y8 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[16]}]
#set_property -dict {LOC W8 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[17]}]
#set_property -dict {LOC W15 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[18]}]
#set_property -dict {LOC AA15 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[19]}]
#set_property -dict {LOC AE16 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[20]}]
#set_property -dict {LOC AF15 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[21]}]
#set_property -dict {LOC AE15 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_addr[22]}]
#set_property -dict {LOC AD15 IOSTANDARD LVCMOS18 PULLUP true} [get_ports {flash_region}]
#set_property -dict {LOC AC9 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_ce_n}]
#set_property -dict {LOC AC14 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_oe_n}]
#set_property -dict {LOC AB10 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_we_n}]
#set_property -dict {LOC Y10 IOSTANDARD LVCMOS18 DRIVE 16} [get_ports {flash_adv_n}]
#set_false_path -to [get_ports {flash_dq[*] flash_addr[*] flash_region flash_ce_n flash_oe_n flash_we_n flash_adv_n}]
#set_output_delay 0 [get_ports {flash_dq[*] flash_addr[*] flash_region flash_ce_n flash_oe_n flash_we_n flash_adv_n}]
#set_false_path -from [get_ports {flash_dq[*]}]
#set_input_delay 0 [get_ports {flash_dq[*]}]

195
example/Nexus_K3P_S/fpga/fpga_k3p.xdc Normal file
View File

@@ -0,0 +1,195 @@
# SPDX-License-Identifier: MIT
#
# Copyright (c) 2025 FPGA Ninja, LLC
#
# Authors:
# - Alex Forencich
#
# XDC constraints for the Cisco Nexus K3P-S / ExaNIC X25
# part: xcku3p-ffvb676-2-e
# General configuration
set_property CFGBVS GND [current_design]
set_property CONFIG_VOLTAGE 1.8 [current_design]
set_property BITSTREAM.GENERAL.COMPRESS true [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN Pullup [current_design]
set_property BITSTREAM.CONFIG.CONFIGRATE 31.9 [current_design]
set_property BITSTREAM.CONFIG.BPI_PAGE_SIZE 8 [current_design]
set_property BITSTREAM.CONFIG.BPI_1ST_READ_CYCLE 4 [current_design]
set_property CONFIG_MODE BPI16 [current_design]
set_property BITSTREAM.CONFIG.OVERTEMPSHUTDOWN Enable [current_design]
# 10 MHz TXCO
#set_property -dict {LOC D14 IOSTANDARD LVCMOS33} [get_ports clk_10mhz]
#create_clock -period 100 -name clk_100mhz [get_ports clk_10mhz]
# LEDs
set_property -dict {LOC J12 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports {sfp_led[0][0]}]
set_property -dict {LOC H12 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports {sfp_led[0][1]}]
set_property -dict {LOC J13 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports {sfp_led[1][0]}]
set_property -dict {LOC H13 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports {sfp_led[1][1]}]
set_property -dict {LOC J14 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports {sma_led[0]}]
set_property -dict {LOC G12 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports {sma_led[1]}]
set_false_path -to [get_ports {sfp_led[*][*] sma_led[*]}]
set_output_delay 0 [get_ports {sfp_led[*][*] sma_led[*]}]
# GPIO
#set_property -dict {LOC F9 IOSTANDARD LVCMOS18} [get_ports {gpio[0]}]
#set_property -dict {LOC F10 IOSTANDARD LVCMOS18} [get_ports {gpio[1]}]
#set_property -dict {LOC G9 IOSTANDARD LVCMOS18} [get_ports {gpio[2]}]
#set_property -dict {LOC G10 IOSTANDARD LVCMOS18} [get_ports {gpio[3]}]
# SMA
#set_property -dict {LOC A14 IOSTANDARD LVCMOS33} [get_ports {sma_in}]
#set_property -dict {LOC A12 IOSTANDARD LVCMOS33 SLEW FAST DRIVE 12} [get_ports {sma_out}]
#set_property -dict {LOC A13 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports {sma_out_en}]
#set_property -dict {LOC B12 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports {sma_term_en}]
#set_false_path -to [get_ports {sma_out sma_term sma_term_en}]
#set_output_delay 0 [get_ports {sma_out sma_term sma_term_en}]
#set_false_path -from [get_ports {sma_in}]
#set_input_delay 0 [get_ports {sma_in}]
# Config
#set_property -dict {LOC C14 IOSTANDARD LVCMOS33} [get_ports {ddr_npres}]
# SFP28 Interfaces
set_property -dict {LOC D2 } [get_ports {sfp_rx_p[0]}] ;# MGTYRXP0_227 GTYE4_CHANNEL_X0Y12 / GTYE4_COMMON_X0Y3
set_property -dict {LOC D1 } [get_ports {sfp_rx_n[0]}] ;# MGTYRXN0_227 GTYE4_CHANNEL_X0Y12 / GTYE4_COMMON_X0Y3
set_property -dict {LOC A4 } [get_ports {sfp_rx_p[1]}] ;# MGTYRXP3_227 GTYE4_CHANNEL_X0Y15 / GTYE4_COMMON_X0Y3
set_property -dict {LOC A3 } [get_ports {sfp_rx_n[1]}] ;# MGTYRXN3_227 GTYE4_CHANNEL_X0Y15 / GTYE4_COMMON_X0Y3
set_property -dict {LOC F7 } [get_ports {sfp_tx_p[0]}] ;# MGTYTXP0_227 GTYE4_CHANNEL_X0Y12 / GTYE4_COMMON_X0Y3
set_property -dict {LOC F6 } [get_ports {sfp_tx_n[0]}] ;# MGTYTXN0_227 GTYE4_CHANNEL_X0Y12 / GTYE4_COMMON_X0Y3
set_property -dict {LOC B7 } [get_ports {sfp_tx_p[1]}] ;# MGTYTXP3_227 GTYE4_CHANNEL_X0Y15 / GTYE4_COMMON_X0Y3
set_property -dict {LOC B6 } [get_ports {sfp_tx_n[1]}] ;# MGTYTXN3_227 GTYE4_CHANNEL_X0Y15 / GTYE4_COMMON_X0Y3
set_property -dict {LOC K7 } [get_ports {sfp_mgt_refclk_p}] ;# MGTREFCLK0P_227 from X2
set_property -dict {LOC K6 } [get_ports {sfp_mgt_refclk_n}] ;# MGTREFCLK0N_227 from X2
set_property -dict {LOC AC17 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sfp_tx_disable[0]}]
set_property -dict {LOC AA17 IOSTANDARD LVCMOS18 SLEW SLOW DRIVE 12} [get_ports {sfp_tx_disable[1]}]
set_property -dict {LOC F12 IOSTANDARD LVCMOS33 PULLUP true} [get_ports {sfp_npres[0]}]
set_property -dict {LOC F14 IOSTANDARD LVCMOS33 PULLUP true} [get_ports {sfp_npres[1]}]
set_property -dict {LOC AC16 IOSTANDARD LVCMOS18 PULLUP true} [get_ports {sfp_los[0]}]
set_property -dict {LOC Y17 IOSTANDARD LVCMOS18 PULLUP true} [get_ports {sfp_los[1]}]
set_property -dict {LOC G14 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports {sfp_rs[0]}]
set_property -dict {LOC H14 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports {sfp_rs[1]}]
#set_property -dict {LOC A10 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12 PULLUP true} [get_ports {sfp_i2c_scl}]
#set_property -dict {LOC C11 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12 PULLUP true} [get_ports {sfp_i2c_sda[0]}]
#set_property -dict {LOC B11 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12 PULLUP true} [get_ports {sfp_i2c_sda[1]}]
# 161.1328125 MHz MGT reference clock
create_clock -period 6.206 -name sfp_mgt_refclk [get_ports {sfp_mgt_refclk_p}]
set_false_path -to [get_ports {sfp_tx_disable[*] sfp_rs[*]}]
set_output_delay 0 [get_ports {sfp_tx_disable[*] sfp_rs[*]}]
set_false_path -from [get_ports {sfp_npres[*] sfp_los[*]}]
set_input_delay 0 [get_ports {sfp_npres[*] sfp_los[*]}]
#set_false_path -to [get_ports {sfp_1_i2c_sda sfp_2_i2c_sda sfp_i2c_scl}]
#set_output_delay 0 [get_ports {sfp_1_i2c_sda sfp_2_i2c_sda sfp_i2c_scl}]
#set_false_path -from [get_ports {sfp_1_i2c_sda sfp_2_i2c_sda sfp_i2c_scl}]
#set_input_delay 0 [get_ports {sfp_1_i2c_sda sfp_2_i2c_sda sfp_i2c_scl}]
# I2C interface
#set_property -dict {LOC B9 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12 PULLUP true} [get_ports {eeprom_i2c_scl}]
#set_property -dict {LOC A9 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12 PULLUP true} [get_ports {eeprom_i2c_sda}]
#set_false_path -to [get_ports {eeprom_i2c_sda eeprom_i2c_scl}]
#set_output_delay 0 [get_ports {eeprom_i2c_sda eeprom_i2c_scl}]
#set_false_path -from [get_ports {eeprom_i2c_sda eeprom_i2c_scl}]
#set_input_delay 0 [get_ports {eeprom_i2c_sda eeprom_i2c_scl}]
# PCIe Interface
#set_property -dict {LOC P2 } [get_ports {pcie_rx_p[0]}] ;# MGTYRXP3_225 GTYE4_CHANNEL_X0Y7 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC P1 } [get_ports {pcie_rx_n[0]}] ;# MGTYRXN3_225 GTYE4_CHANNEL_X0Y7 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC R5 } [get_ports {pcie_tx_p[0]}] ;# MGTYTXP3_225 GTYE4_CHANNEL_X0Y7 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC R4 } [get_ports {pcie_tx_n[0]}] ;# MGTYTXN3_225 GTYE4_CHANNEL_X0Y7 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC T2 } [get_ports {pcie_rx_p[1]}] ;# MGTYRXP2_225 GTYE4_CHANNEL_X0Y6 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC T1 } [get_ports {pcie_rx_n[1]}] ;# MGTYRXN2_225 GTYE4_CHANNEL_X0Y6 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC U5 } [get_ports {pcie_tx_p[1]}] ;# MGTYTXP2_225 GTYE4_CHANNEL_X0Y6 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC U4 } [get_ports {pcie_tx_n[1]}] ;# MGTYTXN2_225 GTYE4_CHANNEL_X0Y6 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC V2 } [get_ports {pcie_rx_p[2]}] ;# MGTYRXP1_225 GTYE4_CHANNEL_X0Y5 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC V1 } [get_ports {pcie_rx_n[2]}] ;# MGTYRXN1_225 GTYE4_CHANNEL_X0Y5 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC W5 } [get_ports {pcie_tx_p[2]}] ;# MGTYTXP1_225 GTYE4_CHANNEL_X0Y5 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC W4 } [get_ports {pcie_tx_n[2]}] ;# MGTYTXN1_225 GTYE4_CHANNEL_X0Y5 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC Y2 } [get_ports {pcie_rx_p[3]}] ;# MGTYRXP0_225 GTYE4_CHANNEL_X0Y4 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC Y1 } [get_ports {pcie_rx_n[3]}] ;# MGTYRXN0_225 GTYE4_CHANNEL_X0Y4 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC AA5 } [get_ports {pcie_tx_p[3]}] ;# MGTYTXP0_225 GTYE4_CHANNEL_X0Y4 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC AA4 } [get_ports {pcie_tx_n[3]}] ;# MGTYTXN0_225 GTYE4_CHANNEL_X0Y4 / GTYE4_COMMON_X0Y1
#set_property -dict {LOC AB2 } [get_ports {pcie_rx_p[4]}] ;# MGTYRXP3_224 GTYE4_CHANNEL_X0Y3 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AB1 } [get_ports {pcie_rx_n[4]}] ;# MGTYRXN3_224 GTYE4_CHANNEL_X0Y3 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AC5 } [get_ports {pcie_tx_p[4]}] ;# MGTYTXP3_224 GTYE4_CHANNEL_X0Y3 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AC4 } [get_ports {pcie_tx_n[4]}] ;# MGTYTXN3_224 GTYE4_CHANNEL_X0Y3 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AD2 } [get_ports {pcie_rx_p[5]}] ;# MGTYRXP2_224 GTYE4_CHANNEL_X0Y2 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AD1 } [get_ports {pcie_rx_n[5]}] ;# MGTYRXN2_224 GTYE4_CHANNEL_X0Y2 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AD7 } [get_ports {pcie_tx_p[5]}] ;# MGTYTXP2_224 GTYE4_CHANNEL_X0Y2 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AD6 } [get_ports {pcie_tx_n[5]}] ;# MGTYTXN2_224 GTYE4_CHANNEL_X0Y2 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AE4 } [get_ports {pcie_rx_p[6]}] ;# MGTYRXP1_224 GTYE4_CHANNEL_X0Y1 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AE3 } [get_ports {pcie_rx_n[6]}] ;# MGTYRXN1_224 GTYE4_CHANNEL_X0Y1 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AE9 } [get_ports {pcie_tx_p[6]}] ;# MGTYTXP1_224 GTYE4_CHANNEL_X0Y1 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AE8 } [get_ports {pcie_tx_n[6]}] ;# MGTYTXN1_224 GTYE4_CHANNEL_X0Y1 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AF2 } [get_ports {pcie_rx_p[7]}] ;# MGTYRXP0_224 GTYE4_CHANNEL_X0Y0 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AF1 } [get_ports {pcie_rx_n[7]}] ;# MGTYRXN0_224 GTYE4_CHANNEL_X0Y0 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AF7 } [get_ports {pcie_tx_p[7]}] ;# MGTYTXP0_224 GTYE4_CHANNEL_X0Y0 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC AF6 } [get_ports {pcie_tx_n[7]}] ;# MGTYTXN0_224 GTYE4_CHANNEL_X0Y0 / GTYE4_COMMON_X0Y0
#set_property -dict {LOC V7 } [get_ports pcie_refclk_p] ;# MGTREFCLK0P_225
#set_property -dict {LOC V6 } [get_ports pcie_refclk_n] ;# MGTREFCLK0N_225
#set_property -dict {LOC T19 IOSTANDARD LVCMOS18 PULLUP true} [get_ports pcie_reset_n]
#set_false_path -from [get_ports {pcie_reset_n}]
#set_input_delay 0 [get_ports {pcie_reset_n}]
# 100 MHz MGT reference clock
#create_clock -period 10 -name pcie_mgt_refclk [get_ports pcie_refclk_p]
# BPI flash
#set_property -dict {LOC AF20 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[0]}]
#set_property -dict {LOC AE18 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[1]}]
#set_property -dict {LOC AF19 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[2]}]
#set_property -dict {LOC AF17 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[3]}]
#set_property -dict {LOC AB19 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[4]}]
#set_property -dict {LOC AD19 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[5]}]
#set_property -dict {LOC AB17 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[6]}]
#set_property -dict {LOC AE17 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[7]}]
#set_property -dict {LOC AD16 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[8]}]
#set_property -dict {LOC AE16 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[9]}]
#set_property -dict {LOC AD18 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[10]}]
#set_property -dict {LOC AC21 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[11]}]
#set_property -dict {LOC AE22 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[12]}]
#set_property -dict {LOC AF22 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[13]}]
#set_property -dict {LOC AF25 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[14]}]
#set_property -dict {LOC AF24 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_dq[15]}]
#set_property -dict {LOC AE20 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[0]}]
#set_property -dict {LOC AE26 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[1]}]
#set_property -dict {LOC AD24 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[2]}]
#set_property -dict {LOC AC23 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[3]}]
#set_property -dict {LOC AE23 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[4]}]
#set_property -dict {LOC AD20 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[5]}]
#set_property -dict {LOC AC24 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[6]}]
#set_property -dict {LOC AC22 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[7]}]
#set_property -dict {LOC AD23 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[8]}]
#set_property -dict {LOC AD21 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[9]}]
#set_property -dict {LOC AB22 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[10]}]
#set_property -dict {LOC AA22 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[11]}]
#set_property -dict {LOC AE25 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[12]}]
#set_property -dict {LOC AD26 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[13]}]
#set_property -dict {LOC AB25 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[14]}]
#set_property -dict {LOC AB26 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[15]}]
#set_property -dict {LOC AD25 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[16]}]
#set_property -dict {LOC AC26 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[17]}]
#set_property -dict {LOC AB21 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[18]}]
#set_property -dict {LOC AB24 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[19]}]
#set_property -dict {LOC Y18 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[20]}]
#set_property -dict {LOC AA20 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[21]}]
#set_property -dict {LOC AC19 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_addr[22]}]
#set_property -dict {LOC Y20 IOSTANDARD LVCMOS18 PULLUP true} [get_ports {flash_region}]
#set_property -dict {LOC AF18 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_ce_n}]
#set_property -dict {LOC Y21 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_oe_n}]
#set_property -dict {LOC AB20 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_we_n}]
#set_property -dict {LOC AF23 IOSTANDARD LVCMOS18 DRIVE 12} [get_ports {flash_adv_n}]
#set_false_path -to [get_ports {flash_dq[*] flash_addr[*] flash_region flash_ce_n flash_oe_n flash_we_n flash_adv_n}]
#set_output_delay 0 [get_ports {flash_dq[*] flash_addr[*] flash_region flash_ce_n flash_oe_n flash_we_n flash_adv_n}]
#set_false_path -from [get_ports {flash_dq[*]}]
#set_input_delay 0 [get_ports {flash_dq[*]}]

1
example/Nexus_K3P_S/fpga/lib/taxi Symbolic link
View File

@@ -0,0 +1 @@
../../../../

367
example/Nexus_K3P_S/fpga/rtl/fpga_core.sv Normal file
View File

@@ -0,0 +1,367 @@
// SPDX-License-Identifier: MIT
/*
Copyright (c) 2014-2025 FPGA Ninja, LLC
Authors:
- Alex Forencich
*/
`resetall
`timescale 1ns / 1ps
`default_nettype none
/*
* FPGA core logic
*/
module fpga_core #
(
parameter logic SIM = 1'b0,
parameter string VENDOR = "XILINX",
parameter string FAMILY = "kintexuplus"
)
(
/*
* Clock: 125MHz
* Synchronous reset
*/
input wire logic clk_125mhz,
input wire logic rst_125mhz,
/*
* GPIO
*/
output wire logic [1:0][1:0] sfp_led,
output wire logic [1:0] sma_led,
/*
* Ethernet: SFP+
*/
input wire logic [1:0] sfp_rx_p,
input wire logic [1:0] sfp_rx_n,
output wire logic [1:0] sfp_tx_p,
output wire logic [1:0] sfp_tx_n,
input wire logic sfp_mgt_refclk_p,
input wire logic sfp_mgt_refclk_n,
output wire logic sfp_mgt_refclk_out,
output wire logic [1:0] sfp_tx_disable,
input wire logic [1:0] sfp_npres,
input wire logic [1:0] sfp_los,
output wire logic [1:0] sfp_rs
);
// SFP+
wire [1:0] sfp_tx_clk;
wire [1:0] sfp_tx_rst;
wire [1:0] sfp_rx_clk;
wire [1:0] sfp_rx_rst;
wire [1:0] sfp_rx_status;
assign sfp_led[0][0] = sfp_rx_status[0];
assign sfp_led[0][1] = 1'b0;
assign sfp_led[1][0] = sfp_rx_status[1];
assign sfp_led[1][1] = 1'b0;
assign sma_led = '0;
assign sfp_tx_disable = '1;
assign sfp_rs = '1;
wire sfp_gtpowergood;
wire sfp_mgt_refclk;
wire sfp_mgt_refclk_int;
wire sfp_mgt_refclk_bufg;
assign sfp_mgt_refclk_out = sfp_mgt_refclk_bufg;
wire sfp_rst;
taxi_axis_if #(.DATA_W(64), .ID_W(8)) axis_sfp_tx[1:0]();
taxi_axis_if #(.DATA_W(96), .KEEP_W(1), .ID_W(8)) axis_sfp_tx_cpl[1:0]();
taxi_axis_if #(.DATA_W(64), .ID_W(8)) axis_sfp_rx[1:0]();
if (SIM) begin
assign sfp_mgt_refclk = sfp_mgt_refclk_p;
assign sfp_mgt_refclk_int = sfp_mgt_refclk_p;
assign sfp_mgt_refclk_bufg = sfp_mgt_refclk_int;
end else begin
if (FAMILY == "kintexu") begin
IBUFDS_GTE3 ibufds_gte3_sfp_mgt_refclk_inst (
.I (sfp_mgt_refclk_p),
.IB (sfp_mgt_refclk_n),
.CEB (1'b0),
.O (sfp_mgt_refclk),
.ODIV2 (sfp_mgt_refclk_int)
);
end else begin
IBUFDS_GTE4 ibufds_gte4_sfp_mgt_refclk_inst (
.I (sfp_mgt_refclk_p),
.IB (sfp_mgt_refclk_n),
.CEB (1'b0),
.O (sfp_mgt_refclk),
.ODIV2 (sfp_mgt_refclk_int)
);
end
BUFG_GT bufg_gt_sfp_mgt_refclk_inst (
.CE (sfp_gtpowergood),
.CEMASK (1'b1),
.CLR (1'b0),
.CLRMASK (1'b1),
.DIV (3'd0),
.I (sfp_mgt_refclk_int),
.O (sfp_mgt_refclk_bufg)
);
end
taxi_sync_reset #(
.N(4)
)
sfp_sync_reset_inst (
.clk(sfp_mgt_refclk_bufg),
.rst(rst_125mhz),
.out(sfp_rst)
);
taxi_eth_mac_25g_us #(
.SIM(SIM),
.VENDOR(VENDOR),
.FAMILY(FAMILY),
.CNT(2),
// GT type
.GT_TYPE(FAMILY == "kintexu" ? "GTH" : "GTY"),
// GT parameters
.GT_TX_POLARITY('1),
.GT_RX_POLARITY('0),
// MAC/PHY parameters
.PADDING_EN(1'b1),
.DIC_EN(1'b1),
.MIN_FRAME_LEN(64),
.PTP_TS_EN(1'b0),
.PTP_TS_FMT_TOD(1'b1),
.PTP_TS_W(96),
.PRBS31_EN(1'b0),
.TX_SERDES_PIPELINE(1),
.RX_SERDES_PIPELINE(1),
.COUNT_125US(125000/6.4)
)
sfp_mac_inst (
.xcvr_ctrl_clk(clk_125mhz),
.xcvr_ctrl_rst(sfp_rst),
/*
* Common
*/
.xcvr_gtpowergood_out(sfp_gtpowergood),
.xcvr_gtrefclk00_in(sfp_mgt_refclk),
.xcvr_qpll0lock_out(),
.xcvr_qpll0clk_out(),
.xcvr_qpll0refclk_out(),
/*
* Serial data
*/
.xcvr_txp(sfp_tx_p),
.xcvr_txn(sfp_tx_n),
.xcvr_rxp(sfp_rx_p),
.xcvr_rxn(sfp_rx_n),
/*
* MAC clocks
*/
.rx_clk(sfp_rx_clk),
.rx_rst_in('0),
.rx_rst_out(sfp_rx_rst),
.tx_clk(sfp_tx_clk),
.tx_rst_in('0),
.tx_rst_out(sfp_tx_rst),
.ptp_sample_clk('0),
/*
* Transmit interface (AXI stream)
*/
.s_axis_tx(axis_sfp_tx),
.m_axis_tx_cpl(axis_sfp_tx_cpl),
/*
* Receive interface (AXI stream)
*/
.m_axis_rx(axis_sfp_rx),
/*
* PTP clock
*/
.tx_ptp_ts('0),
.tx_ptp_ts_step('0),
.rx_ptp_ts('0),
.rx_ptp_ts_step('0),
/*
* Link-level Flow Control (LFC) (IEEE 802.3 annex 31B PAUSE)
*/
.tx_lfc_req('0),
.tx_lfc_resend('0),
.rx_lfc_en('0),
.rx_lfc_req(),
.rx_lfc_ack('0),
/*
* Priority Flow Control (PFC) (IEEE 802.3 annex 31D PFC)
*/
.tx_pfc_req('0),
.tx_pfc_resend('0),
.rx_pfc_en('0),
.rx_pfc_req(),
.rx_pfc_ack('0),
/*
* Pause interface
*/
.tx_lfc_pause_en('0),
.tx_pause_req('0),
.tx_pause_ack(),
/*
* Status
*/
.tx_start_packet(),
.tx_error_underflow(),
.rx_start_packet(),
.rx_error_count(),
.rx_error_bad_frame(),
.rx_error_bad_fcs(),
.rx_bad_block(),
.rx_sequence_error(),
.rx_block_lock(),
.rx_high_ber(),
.rx_status(sfp_rx_status),
.stat_tx_mcf(),
.stat_rx_mcf(),
.stat_tx_lfc_pkt(),
.stat_tx_lfc_xon(),
.stat_tx_lfc_xoff(),
.stat_tx_lfc_paused(),
.stat_tx_pfc_pkt(),
.stat_tx_pfc_xon(),
.stat_tx_pfc_xoff(),
.stat_tx_pfc_paused(),
.stat_rx_lfc_pkt(),
.stat_rx_lfc_xon(),
.stat_rx_lfc_xoff(),
.stat_rx_lfc_paused(),
.stat_rx_pfc_pkt(),
.stat_rx_pfc_xon(),
.stat_rx_pfc_xoff(),
.stat_rx_pfc_paused(),
/*
* Configuration
*/
.cfg_ifg('{2{8'd12}}),
.cfg_tx_enable('1),
.cfg_rx_enable('1),
.cfg_tx_prbs31_enable('0),
.cfg_rx_prbs31_enable('0),
.cfg_mcf_rx_eth_dst_mcast('{2{48'h01_80_C2_00_00_01}}),
.cfg_mcf_rx_check_eth_dst_mcast('1),
.cfg_mcf_rx_eth_dst_ucast('{2{48'd0}}),
.cfg_mcf_rx_check_eth_dst_ucast('0),
.cfg_mcf_rx_eth_src('{2{48'd0}}),
.cfg_mcf_rx_check_eth_src('0),
.cfg_mcf_rx_eth_type('{2{16'h8808}}),
.cfg_mcf_rx_opcode_lfc('{2{16'h0001}}),
.cfg_mcf_rx_check_opcode_lfc('1),
.cfg_mcf_rx_opcode_pfc('{2{16'h0101}}),
.cfg_mcf_rx_check_opcode_pfc('1),
.cfg_mcf_rx_forward('0),
.cfg_mcf_rx_enable('0),
.cfg_tx_lfc_eth_dst('{2{48'h01_80_C2_00_00_01}}),
.cfg_tx_lfc_eth_src('{2{48'h80_23_31_43_54_4C}}),
.cfg_tx_lfc_eth_type('{2{16'h8808}}),
.cfg_tx_lfc_opcode('{2{16'h0001}}),
.cfg_tx_lfc_en('0),
.cfg_tx_lfc_quanta('{2{16'hffff}}),
.cfg_tx_lfc_refresh('{2{16'h7fff}}),
.cfg_tx_pfc_eth_dst('{2{48'h01_80_C2_00_00_01}}),
.cfg_tx_pfc_eth_src('{2{48'h80_23_31_43_54_4C}}),
.cfg_tx_pfc_eth_type('{2{16'h8808}}),
.cfg_tx_pfc_opcode('{2{16'h0101}}),
.cfg_tx_pfc_en('0),
.cfg_tx_pfc_quanta('{2{'{8{16'hffff}}}}),
.cfg_tx_pfc_refresh('{2{'{8{16'h7fff}}}}),
.cfg_rx_lfc_opcode('{2{16'h0001}}),
.cfg_rx_lfc_en('0),
.cfg_rx_pfc_opcode('{2{16'h0101}}),
.cfg_rx_pfc_en('0)
);
for (genvar n = 0; n < 2; n = n + 1) begin : sfp_ch
taxi_axis_async_fifo #(
.DEPTH(16384),
.RAM_PIPELINE(2),
.FRAME_FIFO(1),
.USER_BAD_FRAME_VALUE(1'b1),
.USER_BAD_FRAME_MASK(1'b1),
.DROP_OVERSIZE_FRAME(1),
.DROP_BAD_FRAME(1),
.DROP_WHEN_FULL(1)
)
ch_fifo (
/*
* AXI4-Stream input (sink)
*/
.s_clk(sfp_rx_clk[n]),
.s_rst(sfp_rx_rst[n]),
.s_axis(axis_sfp_rx[n]),
/*
* AXI4-Stream output (source)
*/
.m_clk(sfp_tx_clk[n]),
.m_rst(sfp_tx_rst[n]),
.m_axis(axis_sfp_tx[n]),
/*
* Pause
*/
.s_pause_req(1'b0),
.s_pause_ack(),
.m_pause_req(1'b0),
.m_pause_ack(),
/*
* Status
*/
.s_status_depth(),
.s_status_depth_commit(),
.s_status_overflow(),
.s_status_bad_frame(),
.s_status_good_frame(),
.m_status_depth(),
.m_status_depth_commit(),
.m_status_overflow(),
.m_status_bad_frame(),
.m_status_good_frame()
);
end
endmodule
`resetall

205
example/Nexus_K3P_S/fpga/rtl/fpga_k35.sv Normal file
View File

@@ -0,0 +1,205 @@
// SPDX-License-Identifier: MIT
/*
Copyright (c) 2014-2025 FPGA Ninja, LLC
Authors:
- Alex Forencich
*/
`resetall
`timescale 1ns / 1ps
`default_nettype none
/*
* FPGA top-level module
*/
module fpga #
(
parameter logic SIM = 1'b0,
parameter string VENDOR = "XILINX",
parameter string FAMILY = "kintexu"
)
(
/*
* Clock: 100MHz LVDS
*/
input wire logic clk_100mhz_p,
input wire logic clk_100mhz_n,
/*
* GPIO
*/
output wire logic [1:0][1:0] sfp_led,
output wire logic [1:0] sma_led,
/*
* Ethernet: SFP+
*/
input wire logic [1:0] sfp_rx_p,
input wire logic [1:0] sfp_rx_n,
output wire logic [1:0] sfp_tx_p,
output wire logic [1:0] sfp_tx_n,
input wire logic sfp_mgt_refclk_p,
input wire logic sfp_mgt_refclk_n,
output wire logic [1:0] sfp_tx_disable,
input wire logic [1:0] sfp_npres,
input wire logic [1:0] sfp_los,
output wire logic [1:0] sfp_rs
);
// Clock and reset
wire clk_100mhz_ibufg;
// Internal 125 MHz clock
wire clk_125mhz_mmcm_out;
wire clk_125mhz_int;
wire rst_125mhz_int;
wire mmcm_rst = 1'b0;
wire mmcm_locked;
wire mmcm_clkfb;
IBUFGDS #(
.DIFF_TERM("FALSE"),
.IBUF_LOW_PWR("FALSE")
)
clk_100mhz_ibufg_inst (
.O (clk_100mhz_ibufg),
.I (clk_100mhz_p),
.IB (clk_100mhz_n)
);
// MMCM instance
MMCME3_BASE #(
// 100 MHz input
.CLKIN1_PERIOD(10.0),
.REF_JITTER1(0.010),
// 100 MHz input / 1 = 100 MHz PFD (range 10 MHz to 500 MHz)
.DIVCLK_DIVIDE(1),
// 100 MHz PFD * 10 = 1000 MHz VCO (range 600 MHz to 1440 MHz)
.CLKFBOUT_MULT_F(10),
.CLKFBOUT_PHASE(0),
// 1250 MHz / 8 = 125 MHz, 0 degrees
.CLKOUT0_DIVIDE_F(8),
.CLKOUT0_DUTY_CYCLE(0.5),
.CLKOUT0_PHASE(0),
// Not used
.CLKOUT1_DIVIDE(1),
.CLKOUT1_DUTY_CYCLE(0.5),
.CLKOUT1_PHASE(0),
// Not used
.CLKOUT2_DIVIDE(1),
.CLKOUT2_DUTY_CYCLE(0.5),
.CLKOUT2_PHASE(0),
// Not used
.CLKOUT3_DIVIDE(1),
.CLKOUT3_DUTY_CYCLE(0.5),
.CLKOUT3_PHASE(0),
// Not used
.CLKOUT4_DIVIDE(1),
.CLKOUT4_DUTY_CYCLE(0.5),
.CLKOUT4_PHASE(0),
.CLKOUT4_CASCADE("FALSE"),
// Not used
.CLKOUT5_DIVIDE(1),
.CLKOUT5_DUTY_CYCLE(0.5),
.CLKOUT5_PHASE(0),
// Not used
.CLKOUT6_DIVIDE(1),
.CLKOUT6_DUTY_CYCLE(0.5),
.CLKOUT6_PHASE(0),
// optimized bandwidth
.BANDWIDTH("OPTIMIZED"),
// don't wait for lock during startup
.STARTUP_WAIT("FALSE")
)
clk_mmcm_inst (
// 100 MHz input
.CLKIN1(clk_100mhz_ibufg),
// direct clkfb feeback
.CLKFBIN(mmcm_clkfb),
.CLKFBOUT(mmcm_clkfb),
.CLKFBOUTB(),
// 125 MHz, 0 degrees
.CLKOUT0(clk_125mhz_mmcm_out),
.CLKOUT0B(),
// Not used
.CLKOUT1(),
.CLKOUT1B(),
// Not used
.CLKOUT2(),
.CLKOUT2B(),
// Not used
.CLKOUT3(),
.CLKOUT3B(),
// Not used
.CLKOUT4(),
// Not used
.CLKOUT5(),
// Not used
.CLKOUT6(),
// reset input
.RST(mmcm_rst),
// don't power down
.PWRDWN(1'b0),
// locked output
.LOCKED(mmcm_locked)
);
BUFG
clk_125mhz_bufg_inst (
.I(clk_125mhz_mmcm_out),
.O(clk_125mhz_int)
);
taxi_sync_reset #(
.N(4)
)
sync_reset_125mhz_inst (
.clk(clk_125mhz_int),
.rst(~mmcm_locked),
.out(rst_125mhz_int)
);
fpga_core #(
.SIM(SIM),
.VENDOR(VENDOR),
.FAMILY(FAMILY)
)
core_inst (
/*
* Clock: 125 MHz
* Synchronous reset
*/
.clk_125mhz(clk_125mhz_int),
.rst_125mhz(rst_125mhz_int),
/*
* GPIO
*/
.sfp_led(sfp_led),
.sma_led(sma_led),
/*
* Ethernet: SFP+
*/
.sfp_rx_p(sfp_rx_p),
.sfp_rx_n(sfp_rx_n),
.sfp_tx_p(sfp_tx_p),
.sfp_tx_n(sfp_tx_n),
.sfp_mgt_refclk_p(sfp_mgt_refclk_p),
.sfp_mgt_refclk_n(sfp_mgt_refclk_n),
.sfp_mgt_refclk_out(),
.sfp_tx_disable(sfp_tx_disable),
.sfp_npres(sfp_npres),
.sfp_los(sfp_los),
.sfp_rs(sfp_rs)
);
endmodule
`resetall

189
example/Nexus_K3P_S/fpga/rtl/fpga_k3p.sv Normal file
View File

@@ -0,0 +1,189 @@
// SPDX-License-Identifier: MIT
/*
Copyright (c) 2014-2025 FPGA Ninja, LLC
Authors:
- Alex Forencich
*/
`resetall
`timescale 1ns / 1ps
`default_nettype none
/*
* FPGA top-level module
*/
module fpga #
(
parameter logic SIM = 1'b0,
parameter string VENDOR = "XILINX",
parameter string FAMILY = "kintexuplus"
)
(
/*
* GPIO
*/
output wire logic [1:0][1:0] sfp_led,
output wire logic [1:0] sma_led,
/*
* Ethernet: SFP+
*/
input wire logic [1:0] sfp_rx_p,
input wire logic [1:0] sfp_rx_n,
output wire logic [1:0] sfp_tx_p,
output wire logic [1:0] sfp_tx_n,
input wire logic sfp_mgt_refclk_p,
input wire logic sfp_mgt_refclk_n,
output wire logic [1:0] sfp_tx_disable,
input wire logic [1:0] sfp_npres,
input wire logic [1:0] sfp_los,
output wire logic [1:0] sfp_rs
);
// Clock and reset
wire sfp_mgt_refclk_out;
// Internal 125 MHz clock
wire clk_125mhz_mmcm_out;
wire clk_125mhz_int;
wire rst_125mhz_int;
wire mmcm_rst = 1'b0;
wire mmcm_locked;
wire mmcm_clkfb;
// MMCM instance
MMCME4_BASE #(
// 161.13 MHz input
.CLKIN1_PERIOD(6.206),
.REF_JITTER1(0.010),
// 161.13 MHz input / 11 = 14.65 MHz PFD (range 10 MHz to 500 MHz)
.DIVCLK_DIVIDE(11),
// 14.65 MHz PFD * 64 = 937.5 MHz VCO (range 800 MHz to 1600 MHz)
.CLKFBOUT_MULT_F(64),
.CLKFBOUT_PHASE(0),
// 937.5 MHz / 7.5 = 125 MHz, 0 degrees
.CLKOUT0_DIVIDE_F(7.5),
.CLKOUT0_DUTY_CYCLE(0.5),
.CLKOUT0_PHASE(0),
// Not used
.CLKOUT1_DIVIDE(1),
.CLKOUT1_DUTY_CYCLE(0.5),
.CLKOUT1_PHASE(0),
// Not used
.CLKOUT2_DIVIDE(1),
.CLKOUT2_DUTY_CYCLE(0.5),
.CLKOUT2_PHASE(0),
// Not used
.CLKOUT3_DIVIDE(1),
.CLKOUT3_DUTY_CYCLE(0.5),
.CLKOUT3_PHASE(0),
// Not used
.CLKOUT4_DIVIDE(1),
.CLKOUT4_DUTY_CYCLE(0.5),
.CLKOUT4_PHASE(0),
.CLKOUT4_CASCADE("FALSE"),
// Not used
.CLKOUT5_DIVIDE(1),
.CLKOUT5_DUTY_CYCLE(0.5),
.CLKOUT5_PHASE(0),
// Not used
.CLKOUT6_DIVIDE(1),
.CLKOUT6_DUTY_CYCLE(0.5),
.CLKOUT6_PHASE(0),
// optimized bandwidth
.BANDWIDTH("OPTIMIZED"),
// don't wait for lock during startup
.STARTUP_WAIT("FALSE")
)
clk_mmcm_inst (
// 161.13 MHz input
.CLKIN1(sfp_mgt_refclk_out),
// direct clkfb feeback
.CLKFBIN(mmcm_clkfb),
.CLKFBOUT(mmcm_clkfb),
.CLKFBOUTB(),
// 125 MHz, 0 degrees
.CLKOUT0(clk_125mhz_mmcm_out),
.CLKOUT0B(),
// Not used
.CLKOUT1(),
.CLKOUT1B(),
// Not used
.CLKOUT2(),
.CLKOUT2B(),
// Not used
.CLKOUT3(),
.CLKOUT3B(),
// Not used
.CLKOUT4(),
// Not used
.CLKOUT5(),
// Not used
.CLKOUT6(),
// reset input
.RST(mmcm_rst),
// don't power down
.PWRDWN(1'b0),
// locked output
.LOCKED(mmcm_locked)
);
BUFG
clk_125mhz_bufg_inst (
.I(clk_125mhz_mmcm_out),
.O(clk_125mhz_int)
);
taxi_sync_reset #(
.N(4)
)
sync_reset_125mhz_inst (
.clk(clk_125mhz_int),
.rst(~mmcm_locked),
.out(rst_125mhz_int)
);
fpga_core #(
.SIM(SIM),
.VENDOR(VENDOR),
.FAMILY(FAMILY)
)
core_inst (
/*
* Clock: 125 MHz
* Synchronous reset
*/
.clk_125mhz(clk_125mhz_int),
.rst_125mhz(rst_125mhz_int),
/*
* GPIO
*/
.sfp_led(sfp_led),
.sma_led(sma_led),
/*
* Ethernet: SFP+
*/
.sfp_rx_p(sfp_rx_p),
.sfp_rx_n(sfp_rx_n),
.sfp_tx_p(sfp_tx_p),
.sfp_tx_n(sfp_tx_n),
.sfp_mgt_refclk_p(sfp_mgt_refclk_p),
.sfp_mgt_refclk_n(sfp_mgt_refclk_n),
.sfp_mgt_refclk_out(sfp_mgt_refclk_out),
.sfp_tx_disable(sfp_tx_disable),
.sfp_npres(sfp_npres),
.sfp_los(sfp_los),
.sfp_rs(sfp_rs)
);
endmodule
`resetall

51
example/Nexus_K3P_S/fpga/tb/fpga_core/Makefile Normal file
View File

@@ -0,0 +1,51 @@
# SPDX-License-Identifier: MIT
#
# Copyright (c) 2020-2025 FPGA Ninja, LLC
#
# Authors:
# - Alex Forencich
TOPLEVEL_LANG = verilog
SIM ?= verilator
WAVES ?= 0
COCOTB_HDL_TIMEUNIT = 1ns
COCOTB_HDL_TIMEPRECISION = 1ps
DUT = fpga_core
COCOTB_TEST_MODULES = test_$(DUT)
COCOTB_TOPLEVEL = $(DUT)
MODULE = $(COCOTB_TEST_MODULES)
TOPLEVEL = $(COCOTB_TOPLEVEL)
VERILOG_SOURCES += ../../rtl/$(DUT).sv
VERILOG_SOURCES += ../../lib/taxi/rtl/eth/us/taxi_eth_mac_25g_us.f
VERILOG_SOURCES += ../../lib/taxi/rtl/axis/taxi_axis_async_fifo.f
VERILOG_SOURCES += ../../lib/taxi/rtl/sync/taxi_sync_reset.sv
VERILOG_SOURCES += ../../lib/taxi/rtl/sync/taxi_sync_signal.sv
# handle file list files
process_f_file = $(call process_f_files,$(addprefix $(dir $1),$(shell cat $1)))
process_f_files = $(foreach f,$1,$(if $(filter %.f,$f),$(call process_f_file,$f),$f))
uniq_base = $(if $1,$(call uniq_base,$(foreach f,$1,$(if $(filter-out $(notdir $(lastword $1)),$(notdir $f)),$f,))) $(lastword $1))
VERILOG_SOURCES := $(call uniq_base,$(call process_f_files,$(VERILOG_SOURCES)))
# module parameters
export PARAM_SIM := "1'b1"
export PARAM_VENDOR := "\"XILINX\""
export PARAM_FAMILY := "\"kintexuplus\""
ifeq ($(SIM), icarus)
PLUSARGS += -fst
COMPILE_ARGS += $(foreach v,$(filter PARAM_%,$(.VARIABLES)),-P $(COCOTB_TOPLEVEL).$(subst PARAM_,,$(v))=$($(v)))
else ifeq ($(SIM), verilator)
COMPILE_ARGS += $(foreach v,$(filter PARAM_%,$(.VARIABLES)),-G$(subst PARAM_,,$(v))=$($(v)))
ifeq ($(WAVES), 1)
COMPILE_ARGS += --trace-fst
VERILATOR_TRACE = 1
endif
endif
include $(shell cocotb-config --makefiles)/Makefile.sim

1
example/Nexus_K3P_S/fpga/tb/fpga_core/baser.py Symbolic link
View File

@@ -0,0 +1 @@
../../lib/taxi/tb/eth/baser.py

192
example/Nexus_K3P_S/fpga/tb/fpga_core/test_fpga_core.py Normal file
View File

@@ -0,0 +1,192 @@
#!/usr/bin/env python
# SPDX-License-Identifier: MIT
"""
Copyright (c) 2020-2025 FPGA Ninja, LLC
Authors:
- Alex Forencich
"""
import logging
import os
import sys
import cocotb_test.simulator
import cocotb
from cocotb.log import SimLog
from cocotb.clock import Clock
from cocotb.triggers import RisingEdge, Combine
from cocotbext.eth import XgmiiFrame
try:
from baser import BaseRSerdesSource, BaseRSerdesSink
except ImportError:
# attempt import from current directory
sys.path.insert(0, os.path.join(os.path.dirname(__file__)))
try:
from baser import BaseRSerdesSource, BaseRSerdesSink
finally:
del sys.path[0]
class TB:
def __init__(self, dut, speed=1000e6):
self.dut = dut
self.log = SimLog("cocotb.tb")
self.log.setLevel(logging.DEBUG)
cocotb.start_soon(Clock(dut.clk_125mhz, 8, units="ns").start())
cocotb.start_soon(Clock(dut.sfp_mgt_refclk_p, 6.206, units="ns").start())
self.sfp_sources = []
self.sfp_sinks = []
for ch in dut.sfp_mac_inst.ch:
cocotb.start_soon(Clock(ch.ch_inst.tx_clk, 2.56, units="ns").start())
cocotb.start_soon(Clock(ch.ch_inst.rx_clk, 2.56, units="ns").start())
self.sfp_sources.append(BaseRSerdesSource(ch.ch_inst.serdes_rx_data, ch.ch_inst.serdes_rx_hdr, ch.ch_inst.rx_clk, slip=ch.ch_inst.serdes_rx_bitslip, reverse=True))
self.sfp_sinks.append(BaseRSerdesSink(ch.ch_inst.serdes_tx_data, ch.ch_inst.serdes_tx_hdr, ch.ch_inst.tx_clk, reverse=True))
dut.sfp_npres.setimmediatevalue(0)
dut.sfp_los.setimmediatevalue(0)
async def init(self):
self.dut.rst_125mhz.setimmediatevalue(0)
for k in range(10):
await RisingEdge(self.dut.clk_125mhz)
self.dut.rst_125mhz.value = 1
for k in range(10):
await RisingEdge(self.dut.clk_125mhz)
self.dut.rst_125mhz.value = 0
for k in range(10):
await RisingEdge(self.dut.clk_125mhz)
async def mac_test(tb, source, sink):
tb.log.info("Test MAC")
tb.log.info("Multiple small packets")
count = 64
pkts = [bytearray([(x+k) % 256 for x in range(60)]) for k in range(count)]
for p in pkts:
await source.send(XgmiiFrame.from_payload(p))
for k in range(count):
rx_frame = await sink.recv()
tb.log.info("RX frame: %s", rx_frame)
assert rx_frame.get_payload() == pkts[k]
assert rx_frame.check_fcs()
tb.log.info("Multiple large packets")
count = 32
pkts = [bytearray([(x+k) % 256 for x in range(1514)]) for k in range(count)]
for p in pkts:
await source.send(XgmiiFrame.from_payload(p))
for k in range(count):
rx_frame = await sink.recv()
tb.log.info("RX frame: %s", rx_frame)
assert rx_frame.get_payload() == pkts[k]
assert rx_frame.check_fcs()
tb.log.info("MAC test done")
@cocotb.test()
async def run_test(dut):
tb = TB(dut)
await tb.init()
tests = []
for k in range(len(tb.sfp_sources)):
tb.log.info("Start SFP %d MAC loopback test", k)
tests.append(cocotb.start_soon(mac_test(tb, tb.sfp_sources[k], tb.sfp_sinks[k])))
await Combine(*tests)
await RisingEdge(dut.clk_125mhz)
await RisingEdge(dut.clk_125mhz)
# cocotb-test
tests_dir = os.path.abspath(os.path.dirname(__file__))
rtl_dir = os.path.abspath(os.path.join(tests_dir, '..', '..', 'rtl'))
lib_dir = os.path.abspath(os.path.join(rtl_dir, '..', 'lib'))
def process_f_files(files):
lst = {}
for f in files:
if f[-2:].lower() == '.f':
with open(f, 'r') as fp:
l = fp.read().split()
for f in process_f_files([os.path.join(os.path.dirname(f), x) for x in l]):
lst[os.path.basename(f)] = f
else:
lst[os.path.basename(f)] = f
return list(lst.values())
def test_fpga_core(request):
dut = "fpga_core"
module = os.path.splitext(os.path.basename(__file__))[0]
toplevel = dut
verilog_sources = [
os.path.join(rtl_dir, f"{dut}.sv"),
os.path.join(lib_dir, "taxi", "rtl", "eth", "us", "taxi_eth_mac_25g_us.f"),
os.path.join(lib_dir, "taxi", "rtl", "axis", "taxi_axis_async_fifo.f"),
os.path.join(lib_dir, "taxi", "rtl", "sync", "taxi_sync_reset.sv"),
os.path.join(lib_dir, "taxi", "rtl", "sync", "taxi_sync_signal.sv"),
]
verilog_sources = process_f_files(verilog_sources)
parameters = {}
parameters['SIM'] = "1'b1"
parameters['VENDOR'] = "\"XILINX\""
parameters['FAMILY'] = "\"kintexuplus\""
extra_env = {f'PARAM_{k}': str(v) for k, v in parameters.items()}
sim_build = os.path.join(tests_dir, "sim_build",
request.node.name.replace('[', '-').replace(']', ''))
cocotb_test.simulator.run(
simulator="verilator",
python_search=[tests_dir],
verilog_sources=verilog_sources,
toplevel=toplevel,
module=module,
parameters=parameters,
sim_build=sim_build,
extra_env=extra_env,
)