bslathi19/taxi
1
0
Fork 0
mirror of https://github.com/fpganinja/taxi.git synced 2025-12-09 17:08:38 -08:00
Code Issues Packages Projects Releases Wiki Activity

lss: Implement fractional baud rate generation for UART

Browse Source 
Signed-off-by: Alex Forencich <alex@alexforencich.com>
This commit is contained in:
Alex Forencich
2025-03-11 23:49:39 -07:00
parent 1c686391ab
commit ebeadee172
19 changed files with 86 additions and 57 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
example/Alveo/fpga/rtl/fpga_core.sv
View File

@@ -78,7 +78,7 @@ for (genvar n = 0; n < UART_CNT; n = n + 1) begin : uart_ch
taxi_axis_if #(.DATA_W(8)) axis_uart();
taxi_uart
uut (
uart_inst (
.clk(clk_125mhz),
.rst(rst_125mhz),
@@ -109,7 +109,7 @@ for (genvar n = 0; n < UART_CNT; n = n + 1) begin : uart_ch
/*
* Configuration
*/
.prescale(16'(125000000/115200/8))
.prescale(16'(125000000/115200))
);
end

4
example/Arty/fpga/rtl/fpga_core.sv
View File

@@ -81,7 +81,7 @@ assign phy_reset_n = !rst;
taxi_axis_if #(.DATA_W(8)) axis_uart();
taxi_uart
uut (
uart_inst (
.clk(clk),
.rst(rst),
@@ -112,7 +112,7 @@ uut (
/*
* Configuration
*/
.prescale(16'(125000000/115200/8))
.prescale(16'(125000000/115200))
);
taxi_axis_if #(.DATA_W(8), .ID_W(8)) axis_eth();

4
example/HTG940/fpga/rtl/fpga_core.sv
View File

@@ -71,7 +71,7 @@ assign uart_rst_n = 1'b1;
taxi_axis_if #(.DATA_W(8)) axis_uart();
taxi_uart
uut (
uart_inst (
.clk(clk),
.rst(rst),
@@ -102,7 +102,7 @@ uut (
/*
* Configuration
*/
.prescale(16'(125000000/115200/8))
.prescale(16'(125000000/115200))
);
// BASE-T PHY

4
example/KC705/fpga/rtl/fpga_core.sv
View File

@@ -111,7 +111,7 @@ assign uart_rts = 0;
taxi_axis_if #(.DATA_W(8)) axis_uart();
taxi_uart
uut (
uart_inst (
.clk(clk),
.rst(rst),
@@ -142,7 +142,7 @@ uut (
/*
* Configuration
*/
.prescale(16'(125000000/115200/8))
.prescale(16'(125000000/115200))
);
// BASE-T PHY

4
example/KCU105/fpga/rtl/fpga_core.sv
View File

@@ -109,7 +109,7 @@ assign uart_rts = 0;
taxi_axis_if #(.DATA_W(8)) axis_uart();
taxi_uart
uut (
uart_inst (
.clk(clk),
.rst(rst),
@@ -140,7 +140,7 @@ uut (
/*
* Configuration
*/
.prescale(16'(125000000/115200/8))
.prescale(16'(125000000/115200))
);
// BASE-T PHY

4
example/VCU108/fpga/rtl/fpga_core.sv
View File

@@ -91,7 +91,7 @@ assign uart_rts = 0;
taxi_axis_if #(.DATA_W(8)) axis_uart();
taxi_uart
uut (
uart_inst (
.clk(clk),
.rst(rst),
@@ -122,7 +122,7 @@ uut (
/*
* Configuration
*/
.prescale(16'(125000000/115200/8))
.prescale(16'(125000000/115200))
);
// BASE-T PHY

4
example/VCU118/fpga/rtl/fpga_core.sv
View File

@@ -111,7 +111,7 @@ assign uart_rts = 0;
taxi_axis_if #(.DATA_W(8)) axis_uart();
taxi_uart
uut (
uart_inst (
.clk(clk_125mhz),
.rst(rst_125mhz),
@@ -142,7 +142,7 @@ uut (
/*
* Configuration
*/
.prescale(16'(125000000/115200/8))
.prescale(16'(125000000/115200))
);
// BASE-T PHY

4
example/ZCU102/fpga/rtl/fpga_core.sv
View File

@@ -114,7 +114,7 @@ assign uart_cts = 0;
taxi_axis_if #(.DATA_W(8)) axis_uart();
taxi_uart
uut (
uart_inst (
.clk(clk_125mhz),
.rst(rst_125mhz),
@@ -145,7 +145,7 @@ uut (
/*
* Configuration
*/
.prescale(16'(125000000/115200/8))
.prescale(16'(125000000/115200))
);
// SFP+

4
example/ZCU106/fpga/rtl/fpga_core.sv
View File

@@ -94,7 +94,7 @@ assign uart_cts = 0;
taxi_axis_if #(.DATA_W(8)) axis_uart();
taxi_uart
uut (
uart_inst (
.clk(clk_125mhz),
.rst(rst_125mhz),
@@ -125,7 +125,7 @@ uut (
/*
* Configuration
*/
.prescale(16'(125000000/115200/8))
.prescale(16'(125000000/115200))
);
// SFP+

4
example/ZCU111/fpga/rtl/fpga_core.sv
View File

@@ -72,7 +72,7 @@ assign uart_cts = 0;
taxi_axis_if #(.DATA_W(8)) axis_uart();
taxi_uart
uut (
uart_inst (
.clk(clk_125mhz),
.rst(rst_125mhz),
@@ -103,7 +103,7 @@ uut (
/*
* Configuration
*/
.prescale(16'(125000000/115200/8))
.prescale(16'(125000000/115200))
);
// SFP+

10
rtl/lss/taxi_uart.sv
View File

@@ -15,7 +15,9 @@ Authors:
/*
* AXI4-Stream UART
*/
module taxi_uart
module taxi_uart #(
parameter PRE_W = 16
)
(
input wire logic clk,
input wire logic rst,
@@ -47,13 +49,15 @@ module taxi_uart
/*
* Configuration
*/
input wire logic [15:0] prescale
input wire logic [PRE_W-1:0] prescale
);
wire baud_clk;
taxi_uart_brg
taxi_uart_brg #(
.PRE_W(PRE_W)
)
uart_brg_inst (
.clk(clk),
.rst(rst),

27
rtl/lss/taxi_uart_brg.sv
View File

@@ -15,7 +15,9 @@ Authors:
/*
* AXI4-Stream UART baud rate generator
*/
module taxi_uart_brg
module taxi_uart_brg #(
parameter PRE_W = 16
)
(
input wire logic clk,
input wire logic rst,
@@ -28,26 +30,37 @@ module taxi_uart_brg
/*
* Configuration
*/
input wire logic [15:0] prescale
input wire logic [PRE_W-1:0] prescale
);
logic [15:0] prescale_reg = 0;
localparam FRAC_W = 3;
localparam INT_W = PRE_W - FRAC_W;
logic [INT_W-1:0] prescale_int_reg = 0;
logic [FRAC_W-1:0] prescale_frac_reg = 0;
logic frac_ovf_reg = 1'b0;
logic baud_clk_reg = 1'b0;
assign baud_clk = baud_clk_reg;
always_ff @(posedge clk) begin
frac_ovf_reg <= 1'b0;
baud_clk_reg <= 1'b0;
if (prescale_reg != 0) begin
prescale_reg <= prescale_reg - 1;
if (frac_ovf_reg) begin
// delay extra cycle
frac_ovf_reg <= 1'b0;
end else if (prescale_int_reg != 0) begin
prescale_int_reg <= prescale_int_reg - 1;
end else begin
prescale_reg <= prescale - 1;
prescale_int_reg <= prescale[FRAC_W +: INT_W] - 1;
{frac_ovf_reg, prescale_frac_reg} <= prescale_frac_reg + prescale[FRAC_W-1:0];
baud_clk_reg <= 1'b1;
end
if (rst) begin
prescale_reg <= 0;
prescale_int_reg <= 0;
prescale_frac_reg <= 0;
baud_clk_reg <= 0;
end
end

7
rtl/xfcp/taxi_xfcp_if_uart.sv
View File

@@ -16,6 +16,7 @@ Authors:
* XFCP Interface (UART)
*/
module taxi_xfcp_if_uart #(
parameter PRE_W = 16,
parameter TX_FIFO_DEPTH = 512,
parameter RX_FIFO_DEPTH = 512
)
@@ -38,13 +39,15 @@ module taxi_xfcp_if_uart #(
/*
* Configuration
*/
input wire logic [15:0] prescale
input wire logic [PRE_W-1:0] prescale
);
taxi_axis_if #(.DATA_W(8), .LAST_EN(0)) uart_tx(), uart_rx();
taxi_axis_if #(.DATA_W(8), .LAST_EN(1), .USER_EN(1), .USER_W(1)) fifo_tx(), fifo_rx();
taxi_uart
taxi_uart #(
.PRE_W(PRE_W)
)
uart_inst (
.clk(clk),
.rst(rst),

3
tb/lss/taxi_uart/Makefile
View File

@@ -28,7 +28,8 @@ uniq_base = $(if $1,$(call uniq_base,$(foreach f,$1,$(if $(filter-out $(notdir $
VERILOG_SOURCES := $(call uniq_base,$(call process_f_files,$(VERILOG_SOURCES)))
# module parameters
export PARAM_DATA_W ?= 8
export PARAM_PRE_W := 16
export PARAM_DATA_W := 8
ifeq ($(SIM), icarus)
PLUSARGS += -fst

3
tb/lss/taxi_uart/test_taxi_uart.py
View File

@@ -39,7 +39,7 @@ class TB:
self.axis_source = AxiStreamSource(AxiStreamBus.from_entity(dut.s_axis_tx), dut.clk, dut.rst)
self.axis_sink = AxiStreamSink(AxiStreamBus.from_entity(dut.m_axis_rx), dut.clk, dut.rst)
dut.prescale.setimmediatevalue(int(1/8e-9/baud/8))
dut.prescale.setimmediatevalue(int(1/8e-9/baud))
async def reset(self):
self.dut.rst.setimmediatevalue(0)
@@ -168,6 +168,7 @@ def test_taxi_uart(request):
parameters = {}
parameters['PRE_W'] = 16
parameters['DATA_W'] = 8
extra_env = {f'PARAM_{k}': str(v) for k, v in parameters.items()}

7
tb/lss/taxi_uart/test_taxi_uart.sv
View File

@@ -18,6 +18,7 @@ Authors:
module test_taxi_uart #
(
/* verilator lint_off WIDTHTRUNC */
parameter PRE_W = 16,
parameter DATA_W = 8
/* verilator lint_on WIDTHTRUNC */
)
@@ -37,9 +38,11 @@ logic rx_busy;
logic rx_overrun_error;
logic rx_frame_error;
logic [15:0] prescale;
logic [PRE_W-1:0] prescale;
taxi_uart
taxi_uart #(
.PRE_W(PRE_W)
)
uut (
.clk(clk),
.rst(rst),

1
tb/xfcp/taxi_xfcp_if_uart/Makefile
View File

@@ -28,6 +28,7 @@ uniq_base = $(if $1,$(call uniq_base,$(foreach f,$1,$(if $(filter-out $(notdir $
VERILOG_SOURCES := $(call uniq_base,$(call process_f_files,$(VERILOG_SOURCES)))
# module parameters
export PARAM_PRE_W := 16
export PARAM_TX_FIFO_DEPTH := 512
export PARAM_RX_FIFO_DEPTH := 512

3
tb/xfcp/taxi_xfcp_if_uart/test_taxi_xfcp_if_uart.py
View File

@@ -50,7 +50,7 @@ class TB(object):
self.dsp_source = AxiStreamSource(AxiStreamBus.from_entity(dut.xfcp_dsp_us), dut.clk, dut.rst)
self.dsp_sink = AxiStreamSink(AxiStreamBus.from_entity(dut.xfcp_dsp_ds), dut.clk, dut.rst)
dut.prescale.setimmediatevalue(int(1/8e-9/baud/8))
dut.prescale.setimmediatevalue(int(1/8e-9/baud))
async def reset(self):
self.dut.rst.setimmediatevalue(0)
@@ -181,6 +181,7 @@ def test_taxi_xfcp_if_uart(request):
parameters = {}
parameters['PRE_W'] = 16
parameters['TX_FIFO_DEPTH'] = 512
parameters['RX_FIFO_DEPTH'] = 512

4
tb/xfcp/taxi_xfcp_if_uart/test_taxi_xfcp_if_uart.sv
View File

@@ -18,6 +18,7 @@ Authors:
module test_taxi_xfcp_if_uart #
(
/* verilator lint_off WIDTHTRUNC */
parameter PRE_W = 16,
parameter TX_FIFO_DEPTH = 512,
parameter RX_FIFO_DEPTH = 512
/* verilator lint_on WIDTHTRUNC */
@@ -32,9 +33,10 @@ logic uart_txd;
taxi_axis_if #(.DATA_W(8), .LAST_EN(1), .USER_EN(1), .USER_W(1)) xfcp_dsp_ds(), xfcp_dsp_us();
logic [15:0] prescale;
logic [PRE_W-1:0] prescale;
taxi_xfcp_if_uart #(
.PRE_W(PRE_W),
.TX_FIFO_DEPTH(TX_FIFO_DEPTH),
.RX_FIFO_DEPTH(RX_FIFO_DEPTH)
)