# SPDX-License-Identifier: MIT
#
# Copyright (c) 2025 FPGA Ninja, LLC
#
# Authors:
# - Alex Forencich
#

# FPGA settings
FPGA_PART = xcu55n-fsvh2892-2L-e
FPGA_TOP = fpga
FPGA_ARCH = virtexuplus

# Files for synthesis
SYN_FILES = ../rtl/fpga_au55.sv
SYN_FILES += ../rtl/fpga_core.sv
SYN_FILES += ../lib/taxi/rtl/eth/us/taxi_eth_mac_25g_us.f
SYN_FILES += ../lib/taxi/rtl/xfcp/taxi_xfcp_if_uart.f
SYN_FILES += ../lib/taxi/rtl/xfcp/taxi_xfcp_switch.sv
SYN_FILES += ../lib/taxi/rtl/xfcp/taxi_xfcp_mod_stats.f
SYN_FILES += ../lib/taxi/rtl/axis/taxi_axis_async_fifo.f
SYN_FILES += ../lib/taxi/rtl/sync/taxi_sync_reset.sv
SYN_FILES += ../lib/taxi/rtl/sync/taxi_sync_signal.sv
SYN_FILES += ../lib/taxi/rtl/io/taxi_debounce_switch.sv

# XDC files
XDC_FILES = ../fpga_au55.xdc
XDC_FILES += ../lib/taxi/syn/vivado/taxi_eth_mac_fifo.tcl
XDC_FILES += ../lib/taxi/syn/vivado/taxi_axis_async_fifo.tcl
XDC_FILES += ../lib/taxi/syn/vivado/taxi_sync_reset.tcl
XDC_FILES += ../lib/taxi/syn/vivado/taxi_sync_signal.tcl

# IP
IP_TCL_FILES = ../lib/taxi/rtl/eth/us/taxi_eth_phy_25g_us_gty_25g_161.tcl

# Configuration
#CONFIG_TCL_FILES = ./config.tcl

include ../common/vivado.mk

program: $(PROJECT).bit
	echo "open_hw_manager" > program.tcl
	echo "connect_hw_server" >> program.tcl
	echo "open_hw_target" >> program.tcl
	echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
	echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
	echo "program_hw_devices [current_hw_device]" >> program.tcl
	echo "exit" >> program.tcl
	vivado -nojournal -nolog -mode batch -source program.tcl

$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
	echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x01002000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
	echo "exit" >> generate_mcs.tcl
	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
	mkdir -p rev
	COUNT=100; \
	while [ -e rev/$*_rev$$COUNT.bit ]; \
	do COUNT=$$((COUNT+1)); done; \
	COUNT=$$((COUNT-1)); \
	for x in .mcs .prm; \
	do cp $*$$x rev/$*_rev$$COUNT$$x; \
	echo "Output: rev/$*_rev$$COUNT$$x"; done;

flash: $(PROJECT).mcs $(PROJECT).prm
	echo "open_hw_manager" > flash.tcl
	echo "connect_hw_server" >> flash.tcl
	echo "open_hw_target" >> flash.tcl
	echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
	echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
	echo "set_property PROGRAM.FILES [list \"$(PROJECT).mcs\"] [current_hw_cfgmem]" >> flash.tcl
	echo "set_property PROGRAM.PRM_FILES [list \"$(PROJECT).prm\"] [current_hw_cfgmem]" >> flash.tcl
	echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
	echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
	echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
	echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
	echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
	echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
	echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
	echo "program_hw_devices [current_hw_device]" >> flash.tcl
	echo "refresh_hw_device [current_hw_device]" >> flash.tcl
	echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
	echo "boot_hw_device [current_hw_device]" >> flash.tcl
	echo "exit" >> flash.tcl
	vivado -nojournal -nolog -mode batch -source flash.tcl