mirror of
https://github.com/fpganinja/taxi.git
synced 2025-12-09 08:58:40 -08:00
41 lines
1.3 KiB
Markdown
41 lines
1.3 KiB
Markdown
# Taxi Example Design for KCU105
|
|
|
|
## Introduction
|
|
|
|
This example design targets the Xilinx KCU105 FPGA board.
|
|
|
|
The design places looped-back MACs on the BASE-T port and SFP+ cages, as well as XFCP on the USB UART for monitoring and control.
|
|
|
|
* USB UART
|
|
* XFCP (921600 baud)
|
|
* RJ-45 Ethernet port with Marvell 88E1111 PHY
|
|
* Looped-back MAC via SGMII via Xilinx PCS/PMA core and LVDS IOSERDES
|
|
* SFP+ cages
|
|
* Looped-back 1000BASE-X via Xilinx PCS/PMA core and GTH transceiver
|
|
* Looped-back 10GBASE-R MAC via GTH transceiver
|
|
|
|
## Board details
|
|
|
|
* FPGA: xcku040-ffva1156-2-e
|
|
* USB UART: Silicon Labs CP2105 SCI
|
|
* 1000BASE-T PHY: Marvell 88E1111 via SGMII
|
|
* 1000BASE-X PHY: Xilinx PCS/PMA core via GTH transceiver
|
|
* 10GBASE-R PHY: Soft PCS with GTH transceiver
|
|
|
|
## Licensing
|
|
|
|
* Toolchain
|
|
* Vivado Enterprise (requires license)
|
|
* IP
|
|
* No licensed vendor IP or 3rd party IP
|
|
|
|
## How to build
|
|
|
|
Run `make` in the appropriate `fpga*` subdirectory to build the bitstream. Ensure that the Xilinx Vivado toolchain components are in PATH.
|
|
|
|
## How to test
|
|
|
|
Run `make program` to program the board with Vivado.
|
|
|
|
To test the looped-back MAC, it is recommended to use a network tester like the Viavi T-BERD 5800 that supports basic layer 2 tests with a loopback. Do not connect the looped-back MAC to a network as the reflected packets may cause problems.
|