mirror of
https://github.com/fpganinja/taxi.git
synced 2025-12-09 08:58:40 -08:00
30 lines
1.0 KiB
Markdown
30 lines
1.0 KiB
Markdown
# Taxi Example Design for Arty A7
|
|
|
|
## Introduction
|
|
|
|
This example design targets the Digilent Arty A7 FPGA board.
|
|
|
|
The design places a looped-back MAC on the BASE-T port, as well as a looped-back UART on the USB UART.
|
|
|
|
* USB UART
|
|
* Looped-back UART
|
|
* RJ-45 Ethernet port with TI DP83848J PHY
|
|
* Looped-back MAC via MII
|
|
|
|
## Board details
|
|
|
|
* FPGA: XC7A35TICSG324-1L
|
|
* PHY: TI DP83848J via MII
|
|
|
|
## How to build
|
|
|
|
Run `make` in the appropriate `fpga*` subdirectory to build the bitstream. Ensure that the Xilinx Vivado toolchain components are in PATH.
|
|
|
|
## How to test
|
|
|
|
Run `make program` to program the board with Vivado.
|
|
|
|
To test the looped-back UART, use any serial terminal software like minicom, screen, etc. The looped-back UART will echo typed text back without modification.
|
|
|
|
To test the looped-back MAC, it is recommended to use a network tester like the Viavi T-BERD 5800 that supports basic layer 2 tests with a loopback. Do not connect the looped-back MAC to a network as the reflected packets may cause problems.
|