update timer

change how timer works, now counter and timer are not separate.

hw/efinix_fpga/debug_profile.wizard.json

@@ -3,7 +3,7 @@
         {
             "name": "la0",
             "type": "la",
-            "uuid": "24a3c49eea4a40a18b701e64e40b6ba0",
+            "uuid": "eca5777d2e5a40ed85ba29fd5435f87f",
             "trigin_en": false,
             "trigout_en": false,
             "auto_inserted": true,

hw/efinix_fpga/super6502.xml

@@ -1,5 +1,5 @@
 <?xml version="1.0" encoding="UTF-8"?>
-<efx:project name="super6502" description="" last_change_date="Tue January 3 2023 14:11:06" location="/home/byron/Projects/super6502/hw/efinix_fpga" sw_version="2022.1.226" last_run_state="pass" last_run_tool="efx_pgm" last_run_flow="bitstream" config_result_in_sync="true" design_ood="change" place_ood="sync" route_ood="sync" xmlns:efx="http://www.efinixinc.com/enf_proj" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.efinixinc.com/enf_proj enf_proj.xsd">
+<efx:project name="super6502" description="" last_change_date="Tue January 3 2023 15:48:31" location="/home/byron/Projects/super6502/hw/efinix_fpga" sw_version="2022.2.322" last_run_state="pass" last_run_tool="efx_pgm" last_run_flow="bitstream" config_result_in_sync="true" design_ood="sync" place_ood="sync" route_ood="sync" xmlns:efx="http://www.efinixinc.com/enf_proj" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.efinixinc.com/enf_proj enf_proj.xsd">
     <efx:device_info>
         <efx:family name="Trion"/>
         <efx:device name="T20F256"/>
@@ -55,6 +55,7 @@
         <efx:param name="hdl-compile-unit" value="1" value_type="e_option"/>
         <efx:param name="create-onehot-fsms" value="0" value_type="e_option"/>
         <efx:param name="include" value="ip/sdram_controller" value_type="e_string"/>
+        <efx:param name="min-ce-fanout" value="0" value_type="e_integer"/>
     </efx:synthesis>
     <efx:place_and_route tool_name="efx_pnr">
         <efx:param name="work_dir" value="work_pnr" value_type="e_string"/>

hw/efinix_fpga/timer.sv

@@ -10,85 +10,38 @@ module timer
     output logic irq
 );
 
-logic [16:0] tick_counter_reg, irq_counter_reg;
+//new idea for timer:
+//it can either be oneshot or repeating
+//it can either cause an interrupt or not.
+//if you want it to do both, add another timer.
+
+logic [15:0] timer_latch, timer_counter;
+
+//control register
+// bit 0: Enable interrupts
+// bit 1: Enable 1 shot mode
+
+//by default it just starts counting up
+
 logic [7:0] divisor, status, control;
 
-//  --------------------------------
-//  |   0   |  Tick Counter Low    |
-//  --------------------------------
-//  |   1   |  Tick Counter High   |
-//  --------------------------------
-//  |   2   |   IRQ Counter Low    |
-//  --------------------------------
-//  |   3   |   IRQ Counter High   |
-//  --------------------------------
-//  |   4   |       Control        |
-//  --------------------------------
-//  |   5   |       Divisor        |
-//  --------------------------------
-//  |   6   |       Status         |
-//  --------------------------------
-//  |   7   |       Reserved       |
-//  --------------------------------
-
-
-//   Tick counter register
-// The tick counter register is read only. It starts at 0 upon
-// reset and increments continuously according to the divsor.
-
-//   IRQ Counter Register
-// The IRQ counter register is writable, which is how you set the desired
-// time to count down. Writing to the high register does nothing, while
-// writing to the low register will begin the countdown. Based on the control
-// register, the register will reset itself when it reaches 0 and triggers an
-// interrupt. See the control register for more details.
-
-//   Divisor
-// The divisor register controls how fast the timer counts up. The divisor is
-// bit shifted left by 8 (multiplied by 256), and that is the number of pulses
-// it takes to increment the counters.
-
-//   Status
-// 6:0 Reserved
-// 7: Interrupt.   Set if an interrupt has occured. Write to clear.
-
-//   Control
-// 0: Oneshot.     Set if you only want the timer to run once.
-// 7:1 Reserved     
-
-
-// What features do we want for the timer?
-// 1. Tracking elapsed time
-// 2. Trigger interrupts (repeated or elapsed)
-
-// General Idea
-// Takes in the input clock and can set a divisor
-// of a power of 2. Every time that many clock pulses
-// occur, it will increment the counter. The counter
-// can then be read at any point.
-// The interrupts will have a difference counter which
-// counts down. When the counter reaches 0, it will trigger
-// an interrupt and optionally reset the counter to start
-// again.
 
 logic [15:0] pulsecount;
 
-logic [15:0] tickcount;
-
 //I think this should be negedge so that writes go through
 always @(negedge clk) begin
     if (reset) begin
-        tickcount <= '0;
+        timer_counter <= '0;
         pulsecount <= '0;
-        tick_counter_reg <= '0;
+        timer_latch <= '0;
-        irq_counter_reg <= '0;
         divisor <= '0;
         status <= '0;
         control <= '0;
+        irq <= '1;
     end else begin
 
         if (pulsecount[15:8] == divisor) begin
-            tickcount <= tickcount + 16'b1;
+            timer_counter <= timer_counter + 16'b1;
             pulsecount <= '0;
         end else begin
             pulsecount <= pulsecount + 16'b1;
@@ -110,11 +63,11 @@ always_comb begin
 
     unique case (addr)
         3'h0: begin
-            o_data = tickcount[7:0];
+            o_data = timer_counter[7:0];
         end
 
         3'h1: begin
-            o_data = tickcount[15:8];
+            o_data = timer_counter[15:8];
         end
 
         3'h2: begin