Add back in DM signals for proper byte accesses
This commit is contained in:
File diff suppressed because it is too large
Load Diff
@@ -158,8 +158,8 @@ always_comb begin
|
||||
// dm is not needed for reads?
|
||||
if (w_rd_ack) next_state = READ_WAIT;
|
||||
end else begin //write
|
||||
//w_data_i = i_data << (8*i_addr[1:0]);
|
||||
w_data_i = {4{i_data}}; //does anything get through?
|
||||
w_data_i = i_data << (8*i_addr[1:0]);
|
||||
//w_data_i = {4{i_data}}; //does anything get through?
|
||||
w_dm = ~(4'b1 << i_addr[1:0]);
|
||||
if (~i_cpuclk) begin
|
||||
w_write = '1;
|
||||
@@ -233,7 +233,7 @@ sdram_controller u_sdram_controller(
|
||||
.i_last(w_last), //Set to high to indicate the last transfer of a burst write or read.
|
||||
.i_addr(addr_mux_out), //SDRAM physical address B R C. For half rate, only even addresses.
|
||||
.i_din(r_write_data), //Data to write to SDRAM. Twice normal width when running at half speed (hence the even addresses)
|
||||
.i_dm('0), //dm (r_dm)
|
||||
.i_dm(r_dm), //dm (r_dm)
|
||||
.o_dout(w_data_o), //Data read from SDRAM, doubled as above.
|
||||
.o_sdr_init_done(o_sdr_init_done), //Indicates that the SDRAM initialization is done.
|
||||
.o_wr_ack(w_wr_ack), //Write acknowledge, handshake with we
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<efx:project name="super6502" description="" last_change_date="Thu December 22 2022 20:51:06" location="/home/byron/Projects/super6502/hw/efinix_fpga" sw_version="2022.1.226" last_run_state="pass" last_run_tool="efx_pgm" last_run_flow="bitstream" config_result_in_sync="true" design_ood="sync" place_ood="sync" route_ood="sync" xmlns:efx="http://www.efinixinc.com/enf_proj" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.efinixinc.com/enf_proj enf_proj.xsd">
|
||||
<efx:project name="super6502" description="" last_change_date="Thu December 22 2022 23:12:58" location="/home/byron/Projects/super6502/hw/efinix_fpga" sw_version="2022.1.226" last_run_state="pass" last_run_tool="efx_pgm" last_run_flow="bitstream" config_result_in_sync="true" design_ood="sync" place_ood="sync" route_ood="sync" xmlns:efx="http://www.efinixinc.com/enf_proj" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.efinixinc.com/enf_proj enf_proj.xsd">
|
||||
<efx:device_info>
|
||||
<efx:family name="Trion"/>
|
||||
<efx:device name="T20F256"/>
|
||||
|
||||
Reference in New Issue
Block a user