Throw everything up

I think that previously, I had not actually commited any of this to git.
This adds all of the new effinix stuff that I had been working on for
months.

The gist of all of this is that the intel fpga is expensive and does not
exist, whereas the effinix ones are not as expensive and more existant.
This redoes the project to use the dev board, as well as a custom board
that I may or may not make.
This commit is contained in:
Byron Lathi
2022-10-04 17:15:49 -05:00
parent 5c72c574e5
commit fcae23785e
43 changed files with 10213 additions and 1 deletions

106
hw/efinix_fpga/crc7.sv Normal file
View File

@@ -0,0 +1,106 @@
module crc7 #(parameter POLYNOMIAL = 8'h89)
(
input clk,
input rst,
input load,
input [39:0] data_in,
output logic [6:0] crc_out,
output logic valid
);
logic [46:0] data;
logic [46:0] next_data;
logic [46:0] polyshift;
typedef enum bit [1:0] {IDLE, WORKING, VALID} macro_t;
struct packed {
macro_t macro;
logic [5:0] count;
} state, next_state;
always_ff @(posedge clk) begin
if (rst) begin
polyshift <= {POLYNOMIAL, 39'b0}; //start all the way at the left
data <= '0;
state.macro <= IDLE;
state.count <= '0;
end else begin
if (load) begin
data <= {data_in, 7'b0};
end else begin
data <= next_data;
end
state <= next_state;
if (state.macro == WORKING) begin
polyshift <= polyshift >> 1;
end
if (state.macro == VALID) begin
polyshift <= {POLYNOMIAL, 39'b0};
end
end
end
always_comb begin
next_state = state;
case (state.macro)
IDLE: begin
if (load) begin
next_state.macro = WORKING;
next_state.count = '0;
end
end
WORKING: begin
if (state.count < 39) begin
next_state.count = state.count + 6'b1;
end else begin
next_state.macro = VALID;
next_state.count = '0;
end
end
VALID: begin // Same as IDLE, but IDLE is just for reset.
if (load) begin
next_state.macro = WORKING;
next_state.count = '0;
end
end
default:;
endcase
end
always_comb begin
valid = 0;
next_data = '0;
crc_out = '0;
case (state.macro)
IDLE: begin
valid = 0;
end
WORKING: begin
if (data[6'd46 - state.count]) begin
next_data = data ^ polyshift;
end else begin
next_data = data;
end
end
VALID: begin
valid = ~load;
next_data = data;
crc_out = data[6:0];
end
default:;
endcase
end
endmodule