example/Nexus_K3P_Q: Add example design for Cisco Nexus K3P-Q

Signed-off-by: Alex Forencich <alex@alexforencich.com>

example/Nexus_K3P_Q/fpga/README.md

@@ -0,0 +1,32 @@
+# Taxi Example Design for Nexus K3P-Q (ExaNIC X100)
+
+## Introduction
+
+This example design targets the Cisco Nexus K3P-Q (ExaNIC X100) FPGA board.
+
+The design places looped-back MACs on the QSFP28 cages.
+
+* QSFP28 cages
+  * Looped-back 10GBASE-R or 25GBASE-R MAC via GTH or GTY transceiver
+
+## Board details
+
+* FPGA: xcku3p-ffvb676-2-e
+* 25GBASE-R PHY: Soft PCS with GTH or GTY transceiver
+
+## Licensing
+
+* Toolchain
+  * Vivado Standard (enterprise license not required)
+* IP
+  * No licensed vendor IP or 3rd party IP
+
+## How to build
+
+Run `make` in the appropriate `fpga*` subdirectory to build the bitstream.  Ensure that the Xilinx Vivado toolchain components are in PATH.
+
+## How to test
+
+Run `make program` to program the board with Vivado.
+
+To test the looped-back MAC, it is recommended to use a network tester like the Viavi T-BERD 5800 that supports basic layer 2 tests with a loopback.  Do not connect the looped-back MAC to a network as the reflected packets may cause problems.