bslathi19/super6502
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
3a59de2947dc7d275fb8c3ea01065d6a38c5933a
super6502/hw/fpga
History
Byron Lathi 3a59de2947 Change data count to have proper width (9) 
This was probably an off-by-one mistage, with the width set to 10
instead of 9. The width should be 9 since the buffer is 512 bytes.
2022-04-14 11:19:08 -05:00
..
hvl
Increase sd card addr width by 1
2022-04-11 13:57:07 -05:00
simulation/modelsim
add testbench for SD command tx
2022-04-08 12:29:15 -05:00
.gitignore
ignore .sopcinfo
2022-03-17 13:53:07 -05:00
addr_decode.sv
Increase sd card addr width by 1
2022-04-11 13:57:07 -05:00
bb_spi_controller.sv
Add bb_spi_controller
2022-03-08 15:26:01 -06:00
board_io.sv
Add board-io, replace sevenseg in sw
2022-03-18 01:27:55 +00:00
cpu_clk.ppf
Add hex drivers
2022-03-11 18:25:55 -06:00
cpu_clk.qip
Add hex drivers
2022-03-11 18:25:55 -06:00
cpu_clk.v
Add hex drivers
2022-03-11 18:25:55 -06:00
crc7.sv
Have valid crc when valid signal is present
2022-04-08 12:25:17 -05:00
HexDriver.sv
Add hex drivers
2022-03-11 18:25:55 -06:00
memory_mapper.sv
Add reset input to memory mapper
2022-04-07 10:35:16 -05:00
rom.qip
Add boot rom
2022-03-05 18:12:27 -06:00
rom.v
Get the FPGA part working
2022-03-11 22:55:26 -06:00
sd_controller.sv
Change data count to have proper width (9)
2022-04-14 11:19:08 -05:00
sdram_platform.qsys
Add SDRAM controller (controller)
2022-03-17 13:31:56 -05:00
sdram.sv
Add memory mapper.
2022-04-05 17:10:42 -05:00
SevenSeg.sv
Implement enable byte in hw
2022-03-12 21:45:30 -06:00
super6502.qpf
Create quartus project
2022-03-05 16:38:12 -06:00
super6502.qsf
Disable signal tap
2022-04-11 16:03:50 -05:00
super6502.sdc
Move SDRAM and state machine into its own file
2022-03-17 17:49:20 -05:00
super6502.sv
Fix some warnings
2022-04-11 16:13:38 -05:00
uart.sv
Add receive logic to UART
2022-03-14 16:41:59 -05:00